Title: feat: Move to ESP-IDF framework by damacus · Pull Request #35 · LoopOnCode/UnitySensor · GitHub
Open Graph Title: feat: Move to ESP-IDF framework by damacus · Pull Request #35 · LoopOnCode/UnitySensor
X Title: feat: Move to ESP-IDF framework by damacus · Pull Request #35 · LoopOnCode/UnitySensor
Description: The ESP-IDF framework is smaller than the arduino framework, so has a few features missing. But we now fit in memory again on ESPHome 2025.7.0+ Additionally: Add lefthook Add yamllint hook Lint files. We found a few bugs Add Taskfile for common tasks (run, compile logs) Signed-off-by: Dan Webb dan.webb@damacus.io Install logs here INFO ESPHome 2025.7.2 INFO Reading configuration /config/unity-livingroom.yaml... WARNING GPIO2 is a strapping PIN and should only be used for I/O with care. Attaching external pullup/down resistors to strapping pins can cause unexpected failures. See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins WARNING GPIO9 is a strapping PIN and should only be used for I/O with care. Attaching external pullup/down resistors to strapping pins can cause unexpected failures. See https://esphome.io/guides/faq.html#why-am-i-getting-a-warning-about-strapping-pins INFO Starting log output from 192.168.1.70 using esphome API INFO Successfully resolved unity-office @ 192.168.1.70 in 0.000s INFO Successfully connected to unity-office @ 192.168.1.70 in 0.127s INFO Successful handshake with unity-office @ 192.168.1.70 in 0.056s [11:40:11][I][app:164]: ESPHome version 2025.7.2 compiled on Jul 22 2025, 11:35:45 [11:40:11][I][app:166]: Project LoopOn.Unity version 1.2.17 [11:40:11][C][wifi:613]: WiFi: [11:40:11][C][wifi:434]: Local MAC: C0:4E:30:B9:9C:BC [11:40:11][C][wifi:439]: SSID: 'ironstone-3'[redacted] [11:40:11][C][wifi:442]: IP Address: 192.168.1.70 [11:40:11][C][wifi:446]: BSSID: 9C:05:D6:E7:AF:ED[redacted] [11:40:11][C][wifi:446]: Hostname: 'unity-office' [11:40:11][C][wifi:446]: Signal strength: -69 dB ▂▄▆█ [11:40:11][C][wifi:455]: Channel: 1 [11:40:11][C][wifi:455]: Subnet: 255.255.255.0 [11:40:11][C][wifi:455]: Gateway: 192.168.1.254 [11:40:11][C][wifi:455]: DNS1: 192.168.1.254 [11:40:11][C][wifi:455]: DNS2: 0.0.0.0 [11:40:11][C][logger:246]: Logger: [11:40:11][C][logger:246]: Max Level: DEBUG [11:40:11][C][logger:246]: Initial Level: DEBUG [11:40:11][C][logger:252]: Log Baud Rate: 115200 [11:40:11][C][logger:252]: Hardware UART: USB_SERIAL_JTAG [11:40:11][C][logger:259]: Task Log Buffer Size: 768 [11:40:11][C][i2c.idf:083]: I2C Bus: [11:40:11][C][i2c.idf:084]: SDA Pin: GPIO5 [11:40:11][C][i2c.idf:084]: SCL Pin: GPIO6 [11:40:11][C][i2c.idf:084]: Frequency: 50000 Hz [11:40:11][C][i2c.idf:094]: Recovery: bus successfully recovered [11:40:11][C][uart.idf:155]: UART Bus 0: [11:40:11][C][uart.idf:156]: TX Pin: GPIO21 [11:40:11][C][uart.idf:157]: RX Pin: GPIO20 [11:40:11][C][uart.idf:159]: RX Buffer Size: 256 [11:40:11][C][uart.idf:161]: Baud Rate: 256000 baud [11:40:11][C][uart.idf:161]: Data Bits: 8 [11:40:11][C][uart.idf:161]: Parity: NONE [11:40:11][C][uart.idf:161]: Stop bits: 1 [11:40:11][C][esp32_rmt_led_strip:268]: ESP32 RMT LED Strip: [11:40:11][C][esp32_rmt_led_strip:268]: Pin: 2 [11:40:11][C][esp32_rmt_led_strip:272]: RMT Symbols: 96 [11:40:11][C][esp32_rmt_led_strip:297]: RGB Order: GRB [11:40:11][C][esp32_rmt_led_strip:297]: Max refresh rate: 0 [11:40:11][C][esp32_rmt_led_strip:297]: Number of LEDs: 1 [11:40:11][C][template.text_sensor:020]: Template Sensor 'Unity Config Version' [11:40:11][C][template.text_sensor:020]: Icon: 'mdi:tag' [11:40:11][C][gpio.binary_sensor:052]: GPIO Binary Sensor 'Unity Button' [11:40:11][C][gpio.binary_sensor:053]: Pin: GPIO9 [11:40:11][C][gpio.binary_sensor:055]: Mode: interrupt [11:40:11][C][gpio.binary_sensor:072]: Interrupt Type: ANY_EDGE [11:40:11][C][template.number:050]: Template Number 'Unity Human Distance Range' [11:40:11][C][template.number:050]: Icon: 'mdi:arrow-left-right' [11:40:11][C][template.number:050]: Unit of Measurement: 'm' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Human Clear Delay' [11:40:11][C][template.number:050]: Icon: 'mdi:timer' [11:40:11][C][template.number:050]: Unit of Measurement: 's' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Moving Human Sensitivity Threshold' [11:40:11][C][template.number:050]: Icon: 'mdi:car-cruise-control' [11:40:11][C][template.number:050]: Unit of Measurement: '%' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Still Human Sensitivity Threshold' [11:40:11][C][template.number:050]: Icon: 'mdi:car-cruise-control' [11:40:11][C][template.number:050]: Unit of Measurement: '%' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Temperature Offset' [11:40:11][C][template.number:050]: Icon: 'mdi:thermometer' [11:40:11][C][template.number:050]: Unit of Measurement: '°C' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Humidity Offset' [11:40:11][C][template.number:050]: Icon: 'mdi:water-percent' [11:40:11][C][template.number:050]: Unit of Measurement: '%' [11:40:11][C][template.number:051]: Optimistic: YES [11:40:11][C][template.number:052]: Update Interval: never [11:40:11][C][template.number:050]: Template Number 'Unity Illuminance Offset' [11:40:11][C][template.number:050]: Icon: 'mdi:brightness-5' [11:40:11][C][template.number:050]: Unit of Measurement: 'lx' [11:40:12][C][light:092]: Light 'Unity Light' [11:40:12][C][light:094]: Default Transition Length: 1.0s [11:40:12][C][light:094]: Gamma Correct: 2.80 [11:40:12][C][ld2410:015]: LD2410: [11:40:12][C][ld2410:017]: HasTargetSensor 'Unity Has Human Target' [11:40:12][C][ld2410:017]: Device Class: 'occupancy' [11:40:12][C][ld2410:018]: MovingSensor 'Unity Has Moving Human Target' [11:40:12][C][ld2410:018]: Device Class: 'motion' [11:40:12][C][ld2410:019]: StillSensor 'Unity Has Still Human Target' [11:40:12][C][ld2410:019]: Device Class: 'occupancy' [11:40:12][C][ld2410:022]: Moving Distance 'Unity Moving Human Distance' [11:40:12][C][ld2410:022]: State Class: '' [11:40:12][C][ld2410:022]: Unit of Measurement: 'cm' [11:40:12][C][ld2410:022]: Accuracy Decimals: 0 [11:40:12][C][ld2410:022]: Device Class: 'distance' [11:40:12][C][ld2410:023]: Still Distance 'Unity Still Human Distance' [11:40:12][C][ld2410:023]: State Class: '' [11:40:12][C][ld2410:023]: Unit of Measurement: 'cm' [11:40:12][C][ld2410:023]: Accuracy Decimals: 0 [11:40:12][C][ld2410:023]: Device Class: 'distance' [11:40:12][C][ld2410:024]: Moving Energy 'Unity Moving Human Energy' [11:40:12][C][ld2410:024]: State Class: '' [11:40:12][C][ld2410:024]: Unit of Measurement: '%' [11:40:12][C][ld2410:024]: Accuracy Decimals: 0 [11:40:12][C][ld2410:024]: Device Class: 'energy' [11:40:12][C][ld2410:025]: Still Energy 'Unity Still Human Energy' [11:40:12][C][ld2410:025]: State Class: '' [11:40:12][C][ld2410:025]: Unit of Measurement: '%' [11:40:12][C][ld2410:025]: Accuracy Decimals: 0 [11:40:12][C][ld2410:025]: Device Class: 'energy' [11:40:12][C][ld2410:026]: Detection Distance 'Unity Human Detection Distance' [11:40:12][C][ld2410:026]: State Class: '' [11:40:12][C][ld2410:026]: Unit of Measurement: 'cm' [11:40:12][C][ld2410:026]: Accuracy Decimals: 0 [11:40:12][C][ld2410:026]: Device Class: 'distance' [11:40:12][C][ld2410:031]: Firmware Version : 2.5.353616 [11:40:12][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is OFF [11:40:12][D][sensor:104]: 'Unity Moving Human Energy': Sending state 0.00000 % with 0 decimals of accuracy [11:40:12][C][internal_temperature:108]: Internal Temperature Sensor 'Unity Internal Temperature' [11:40:12][C][internal_temperature:108]: State Class: 'measurement' [11:40:12][C][internal_temperature:108]: Unit of Measurement: '°C' [11:40:12][C][internal_temperature:108]: Accuracy Decimals: 1 [11:40:12][C][internal_temperature:108]: Device Class: 'temperature' [11:40:12][C][internal_temperature:108]: Icon: 'mdi:thermometer' [11:40:12][C][hdc1080:031]: HDC1080: [11:40:12][C][hdc1080:032]: Address: 0x40 [11:40:12][C][hdc1080:036]: Update Interval: 12.0s [11:40:12][C][hdc1080:037]: Temperature 'Unity Temperature' [11:40:12][C][hdc1080:037]: State Class: 'measurement' [11:40:12][C][hdc1080:037]: Unit of Measurement: '°C' [11:40:12][C][hdc1080:037]: Accuracy Decimals: 1 [11:40:12][C][hdc1080:037]: Device Class: 'temperature' [11:40:12][C][hdc1080:038]: Humidity 'Unity Humidity' [11:40:12][C][hdc1080:038]: State Class: 'measurement' [11:40:12][C][hdc1080:038]: Unit of Measurement: '%' [11:40:12][C][hdc1080:038]: Accuracy Decimals: 0 [11:40:12][C][hdc1080:038]: Device Class: 'humidity' [11:40:12][C][restart.button:017]: Restart Button 'Unity Restart' [11:40:12][C][restart.button:017]: Icon: 'mdi:restart' [11:40:12][C][factory_reset.button:011]: Factory Reset Button 'Unity Factory Reset' [11:40:12][C][factory_reset.button:011]: Icon: 'mdi:restart-alert' [11:40:12][C][bh1750.sensor:118]: BH1750 'Unity Illuminance' [11:40:12][C][bh1750.sensor:118]: State Class: 'measurement' [11:40:12][C][bh1750.sensor:118]: Unit of Measurement: 'lx' [11:40:12][C][bh1750.sensor:118]: Accuracy Decimals: 1 [11:40:12][C][bh1750.sensor:118]: Device Class: 'illuminance' [11:40:12][C][bh1750.sensor:119]: Address: 0x23 [11:40:12][C][bh1750.sensor:124]: Update Interval: 60.0s [11:40:12][C][esp32_ble:524]: Bluetooth stack is not enabled [11:40:12][C][esp32_ble_server:195]: ESP32 BLE Server: [11:40:12][C][esp32_improv.component:275]: ESP32 Improv: [11:40:12][C][esp32_improv.component:280]: Status Indicator: 'YES' [11:40:12][C][captive_portal:099]: Captive Portal: [11:40:12][C][esphome.ota:073]: Over-The-Air updates: [11:40:12][C][esphome.ota:073]: Address: unity-office.local:3232 [11:40:12][C][esphome.ota:073]: Version: 2 [11:40:12][C][safe_mode:018]: Safe Mode: [11:40:12][C][safe_mode:019]: Boot considered successful after 60 seconds [11:40:12][C][safe_mode:019]: Invoke after 10 boot attempts [11:40:12][C][safe_mode:019]: Remain for 300 seconds [11:40:12][C][web_server.ota:224]: Web Server OTA [11:40:12][C][api:207]: API Server: [11:40:12][C][api:207]: Address: unity-office.local:6053 [11:40:12][C][api:212]: Using noise encryption: YES [11:40:12][C][improv_serial:032]: Improv Serial: [11:40:12][C][wifi_info:010]: IP Address 'Unity IP Address' [11:40:12][C][wifi_info:010]: Icon: 'mdi:wan' [11:40:12][C][wifi_signal.sensor:010]: WiFi Signal 'Unity WiFi Signal' [11:40:12][C][wifi_signal.sensor:010]: State Class: 'measurement' [11:40:12][C][wifi_signal.sensor:010]: Unit of Measurement: 'dBm' [11:40:12][C][wifi_signal.sensor:010]: Accuracy Decimals: 0 [11:40:12][C][wifi_signal.sensor:010]: Device Class: 'signal_strength' [11:40:12][C][mdns:122]: mDNS: [11:40:12][C][mdns:122]: Hostname: unity-office [11:40:13][D][sensor:104]: 'Unity Moving Human Distance': Sending state 53.00000 cm with 0 decimals of accuracy [11:40:13][D][sensor:104]: 'Unity Still Human Distance': Sending state 53.00000 cm with 0 decimals of accuracy [11:40:13][D][sensor:104]: 'Unity Human Detection Distance': Sending state 31.00000 cm with 0 decimals of accuracy [11:40:14][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is ON [11:40:14][D][sensor:104]: 'Unity Moving Human Distance': Sending state 150.00000 cm with 0 decimals of accuracy [11:40:14][D][sensor:104]: 'Unity Moving Human Energy': Sending state 28.00000 % with 0 decimals of accuracy [11:40:14][D][sensor:104]: 'Unity Still Human Distance': Sending state 150.00000 cm with 0 decimals of accuracy [11:40:14][D][sensor:104]: 'Unity Human Detection Distance': Sending state 68.00000 cm with 0 decimals of accuracy [11:40:15][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is OFF [11:40:15][D][sensor:104]: 'Unity Moving Human Energy': Sending state 0.00000 % with 0 decimals of accuracy [11:40:15][D][sensor:104]: 'Unity Human Detection Distance': Sending state 116.00000 cm with 0 decimals of accuracy [11:40:16][D][sensor:104]: 'Unity Human Detection Distance': Sending state 127.00000 cm with 0 decimals of accuracy [11:40:16][D][bh1750.sensor:159]: 'Unity Illuminance': Illuminance=16.1lx [11:40:16][D][sensor:104]: 'Unity Illuminance': Sending state 16.07283 lx with 1 decimals of accuracy [11:40:18][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is ON [11:40:18][D][sensor:104]: 'Unity Moving Human Distance': Sending state 70.00000 cm with 0 decimals of accuracy [11:40:18][D][sensor:104]: 'Unity Moving Human Energy': Sending state 97.00000 % with 0 decimals of accuracy [11:40:19][D][sensor:104]: 'Unity Moving Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:19][D][sensor:104]: 'Unity Moving Human Energy': Sending state 72.00000 % with 0 decimals of accuracy [11:40:19][D][sensor:104]: 'Unity Still Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:19][D][sensor:104]: 'Unity Human Detection Distance': Sending state 53.00000 cm with 0 decimals of accuracy [11:40:20][D][sensor:104]: 'Unity Moving Human Distance': Sending state 62.00000 cm with 0 decimals of accuracy [11:40:20][D][sensor:104]: 'Unity Moving Human Energy': Sending state 100.00000 % with 0 decimals of accuracy [11:40:20][D][sensor:104]: 'Unity Still Human Distance': Sending state 59.00000 cm with 0 decimals of accuracy [11:40:20][D][sensor:104]: 'Unity Human Detection Distance': Sending state 37.00000 cm with 0 decimals of accuracy [11:40:21][D][sensor:104]: 'Unity Moving Human Distance': Sending state 54.00000 cm with 0 decimals of accuracy [11:40:21][D][sensor:104]: 'Unity Moving Human Energy': Sending state 92.00000 % with 0 decimals of accuracy [11:40:21][D][sensor:104]: 'Unity Still Human Distance': Sending state 45.00000 cm with 0 decimals of accuracy [11:40:21][D][sensor:104]: 'Unity Human Detection Distance': Sending state 0.00000 cm with 0 decimals of accuracy [11:40:22][D][hdc1080:069]: Got temperature=41.7°C humidity=29.7% [11:40:22][D][sensor:104]: 'Unity Moving Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:22][D][sensor:104]: 'Unity Moving Human Energy': Sending state 100.00000 % with 0 decimals of accuracy [11:40:22][D][sensor:104]: 'Unity Still Human Distance': Sending state 69.00000 cm with 0 decimals of accuracy [11:40:23][D][sensor:104]: 'Unity Internal Temperature': Sending state 54.80000 °C with 1 decimals of accuracy [11:40:23][D][sensor:104]: 'Unity Moving Human Distance': Sending state 56.00000 cm with 0 decimals of accuracy [11:40:23][D][sensor:104]: 'Unity Moving Human Energy': Sending state 68.00000 % with 0 decimals of accuracy [11:40:23][D][sensor:104]: 'Unity Still Human Distance': Sending state 75.00000 cm with 0 decimals of accuracy [11:40:25][D][sensor:104]: 'Unity Moving Human Distance': Sending state 60.00000 cm with 0 decimals of accuracy [11:40:25][D][sensor:104]: 'Unity Moving Human Energy': Sending state 72.00000 % with 0 decimals of accuracy [11:40:25][D][sensor:104]: 'Unity Still Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:26][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is OFF [11:40:26][D][sensor:104]: 'Unity Moving Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:26][D][sensor:104]: 'Unity Moving Human Energy': Sending state 0.00000 % with 0 decimals of accuracy [11:40:26][D][sensor:104]: 'Unity Still Human Distance': Sending state 195.00000 cm with 0 decimals of accuracy [11:40:26][D][sensor:104]: 'Unity Human Detection Distance': Sending state 102.00000 cm with 0 decimals of accuracy [11:40:26][D][sensor:104]: 'Unity WiFi Signal': Sending state -69.00000 dBm with 0 decimals of accuracy [11:40:27][D][sensor:104]: 'Unity Moving Human Distance': Sending state 68.00000 cm with 0 decimals of accuracy [11:40:27][D][sensor:104]: 'Unity Still Human Distance': Sending state 68.00000 cm with 0 decimals of accuracy [11:40:27][D][sensor:104]: 'Unity Human Detection Distance': Sending state 140.00000 cm with 0 decimals of accuracy [11:40:28][D][sensor:104]: 'Unity Moving Human Distance': Sending state 150.00000 cm with 0 decimals of accuracy [11:40:28][D][sensor:104]: 'Unity Moving Human Energy': Sending state 22.00000 % with 0 decimals of accuracy [11:40:28][D][sensor:104]: 'Unity Still Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:28][D][sensor:104]: 'Unity Human Detection Distance': Sending state 54.00000 cm with 0 decimals of accuracy [11:40:29][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is ON [11:40:29][D][sensor:104]: 'Unity Moving Human Distance': Sending state 72.00000 cm with 0 decimals of accuracy [11:40:29][D][sensor:104]: 'Unity Moving Human Energy': Sending state 91.00000 % with 0 decimals of accuracy [11:40:29][D][sensor:104]: 'Unity Human Detection Distance': Sending state 0.00000 cm with 0 decimals of accuracy [11:40:30][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is OFF [11:40:30][D][sensor:104]: 'Unity Moving Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:30][D][sensor:104]: 'Unity Moving Human Energy': Sending state 0.00000 % with 0 decimals of accuracy [11:40:31][D][binary_sensor:026]: 'Unity Has Moving Human Target': New state is ON [11:40:31][D][sensor:104]: 'Unity Moving Human Energy': Sending state 99.00000 % with 0 decimals of accuracy [11:40:31][D][sensor:104]: 'Unity Still Human Distance': Sending state 62.00000 cm with 0 decimals of accuracy [11:40:31][D][sensor:104]: 'Unity Human Detection Distance': Sending state 44.00000 cm with 0 decimals of accuracy [11:40:32][D][sensor:104]: 'Unity Moving Human Distance': Sending state 53.00000 cm with 0 decimals of accuracy [11:40:32][D][sensor:104]: 'Unity Moving Human Energy': Sending state 52.00000 % with 0 decimals of accuracy [11:40:32][D][sensor:104]: 'Unity Still Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:32][D][sensor:104]: 'Unity Human Detection Distance': Sending state 35.00000 cm with 0 decimals of accuracy [11:40:33][D][sensor:104]: 'Unity Moving Human Distance': Sending state 30.00000 cm with 0 decimals of accuracy [11:40:33][D][sensor:104]: 'Unity Moving Human Energy': Sending state 81.00000 % with 0 decimals of accuracy [11:40:34][D][sensor:104]: 'Unity Moving Human Distance': Sending state 65.00000 cm with 0 decimals of accuracy [11:40:34][D][sensor:104]: 'Unity Moving Human Energy': Sending state 100.00000 % with 0 decimals of accuracy [11:40:34][D][sensor:104]: 'Unity Human Detection Distance': Sending state 33.00000 cm with 0 decimals of accuracy [11:40:34][D][hdc1080:069]: Got temperature=41.8°C humidity=29.7% [11:40:35][D][sensor:104]: 'Unity Moving Human Distance': Sending state 71.00000 cm with 0 decimals of accuracy [11:40:35][D][sensor:104]: 'Unity Still Human Distance': Sending state 58.00000 cm with 0 decimals of accuracy [11:40:35][D][sensor:104]: 'Unity Human Detection Distance': Sending state 38.00000 cm with 0 decimals of accuracy
Open Graph Description: The ESP-IDF framework is smaller than the arduino framework, so has a few features missing. But we now fit in memory again on ESPHome 2025.7.0+ Additionally: Add lefthook Add yamllint hook Lint fi...
X Description: The ESP-IDF framework is smaller than the arduino framework, so has a few features missing. But we now fit in memory again on ESPHome 2025.7.0+ Additionally: Add lefthook Add yamllint hook Lint fi...
Opengraph URL: https://github.com/LoopOnCode/UnitySensor/pull/35
X: @github
Domain: patch-diff.githubusercontent.com
| route-pattern | /:user_id/:repository/pull/:id/checks(.:format) |
| route-controller | pull_requests |
| route-action | checks |
| fetch-nonce | v2:e9dca4fb-272d-e8de-a456-c48390fb4d66 |
| current-catalog-service-hash | 87dc3bc62d9b466312751bfd5f889726f4f1337bdff4e8be7da7c93d6c00a25a |
| request-id | CD8C:65339:BDAB:F6CE:69826E62 |
| html-safe-nonce | 79868f3337d6cc97556b1d0109ed9335d9cfb93d0b9a042029e2e946f612962c |
| visitor-payload | eyJyZWZlcnJlciI6IiIsInJlcXVlc3RfaWQiOiJDRDhDOjY1MzM5OkJEQUI6RjZDRTo2OTgyNkU2MiIsInZpc2l0b3JfaWQiOiI1OTE1NTg5OTYxODU5NjI0NTQ3IiwicmVnaW9uX2VkZ2UiOiJpYWQiLCJyZWdpb25fcmVuZGVyIjoiaWFkIn0= |
| visitor-hmac | 97f396d014bffb592e83f47a29592335b87b01440094c09d774682e874f44f51 |
| hovercard-subject-tag | pull_request:2685005344 |
| github-keyboard-shortcuts | repository,pull-request-list,pull-request-conversation,pull-request-files-changed,checks,copilot |
| google-site-verification | Apib7-x98H0j5cPqHWwSMm6dNU4GmODRoqxLiDzdx9I |
| octolytics-url | https://collector.github.com/github/collect |
| analytics-location | / |
| fb:app_id | 1401488693436528 |
| apple-itunes-app | app-id=1477376905, app-argument=https://github.com/LoopOnCode/UnitySensor/pull/35/checks |
| twitter:image | https://avatars.githubusercontent.com/u/40786?s=400&v=4 |
| twitter:card | summary_large_image |
| og:image | https://avatars.githubusercontent.com/u/40786?s=400&v=4 |
| og:image:alt | The ESP-IDF framework is smaller than the arduino framework, so has a few features missing. But we now fit in memory again on ESPHome 2025.7.0+ Additionally: Add lefthook Add yamllint hook Lint fi... |
| og:site_name | GitHub |
| og:type | object |
| hostname | github.com |
| expected-hostname | github.com |
| None | d8cbbf00e6212b4e561a1d6db613194a319d58a2967494f7cc81cf6da3fbb985 |
| turbo-cache-control | no-preview |
| go-import | github.com/LoopOnCode/UnitySensor git https://github.com/LoopOnCode/UnitySensor.git |
| octolytics-dimension-user_id | 121688530 |
| octolytics-dimension-user_login | LoopOnCode |
| octolytics-dimension-repository_id | 587116225 |
| octolytics-dimension-repository_nwo | LoopOnCode/UnitySensor |
| octolytics-dimension-repository_public | true |
| octolytics-dimension-repository_is_fork | false |
| octolytics-dimension-repository_network_root_id | 587116225 |
| octolytics-dimension-repository_network_root_nwo | LoopOnCode/UnitySensor |
| turbo-body-classes | logged-out env-production page-responsive full-width full-width-p-0 |
| disable-turbo | false |
| browser-stats-url | https://api.github.com/_private/browser/stats |
| browser-errors-url | https://api.github.com/_private/browser/errors |
| release | 15d777483e72943a892af4ab5c0bbdb20215e6f3 |
| ui-target | full |
| theme-color | #1e2327 |
| color-scheme | light dark |
Links:
Viewport: width=device-width