René's URL Explorer Experiment


Title: No title

direct link

Domain: code.angularjs.org

Links:

Go to anchor {{x}} https://code.angularjs.org/1.5.5/angular.js
Note that `$sce.RESOURCE_URL` makes a stronger statement about the URL than `$sce.URL` does and therefore contexts requiring values trusted for `$sce.RESOURCE_URL` can be used anywhere that values trusted for `$sce.URL` are required. | * | `$sce.JS` | For JavaScript that is safe to execute in your application's context. Currently unused. Feel free to use it in your own directives. | * * ## Format of items in {@link ng.$sceDelegateProvider#resourceUrlWhitelist resourceUrlWhitelist}/{@link ng.$sceDelegateProvider#resourceUrlBlacklist Blacklist} * * Each element in these arrays must be one of the following: * * - **'self'** * - The special **string**, `'self'`, can be used to match against all URLs of the **same * domain** as the application document using the **same protocol**. * - **String** (except the special value `'self'`) * - The string is matched against the full *normalized / absolute URL* of the resource * being tested (substring matches are not good enough.) * - There are exactly **two wildcard sequences** - `*` and `**`. All other characters * match themselves. * - `*`: matches zero or more occurrences of any character other than one of the following 6 * characters: '`:`', '`/`', '`.`', '`?`', '`&`' and '`;`'. It's a useful wildcard for use * in a whitelist. * - `**`: matches zero or more occurrences of *any* character. As such, it's not * appropriate for use in a scheme, domain, etc. as it would match too much. (e.g. * http://**.example.com/ would match http://evil.com/?ignore=.example.com/ and that might * not have been the intention.) Its usage at the very end of the path is ok. (e.g. * http://foo.example.com/templates/**). * - **RegExp** (*see caveat below*) * - *Caveat*: While regular expressions are powerful and offer great flexibility, their syntax * (and all the inevitable escaping) makes them *harder to maintain*. It's easy to * accidentally introduce a bug when one updates a complex expression (imho, all regexes should * have good test coverage). For instance, the use of `.` in the regex is correct only in a * small number of cases. A `.` character in the regex used when matching the scheme or a * subdomain could be matched against a `:` or literal `.` that was likely not intended. It * is highly recommended to use the string patterns and only fall back to regular expressions * as a last resort. * - The regular expression must be an instance of RegExp (i.e. not a string.) It is * matched against the **entire** *normalized / absolute URL* of the resource being tested * (even when the RegExp did not have the `^` and `$` codes.) In addition, any flags * present on the RegExp (such as multiline, global, ignoreCase) are ignored. * - If you are generating your JavaScript from some other templating engine (not * recommended, e.g. in issue [#4006](https://github.com/angular/angular.js/issues/4006)), * remember to escape your regular expression (and be aware that you might need more than * one level of escaping depending on your templating engine and the way you interpolated * the value.) Do make use of your platform's escaping mechanism as it might be good * enough before coding your own. E.g. Ruby has * [Regexp.escape(str)](http://www.ruby-doc.org/core-2.0.0/Regexp.html#method-c-escape) * and Python has [re.escape](http://docs.python.org/library/re.html#re.escape). * Javascript lacks a similar built in function for escaping. Take a look at Google * Closure library's [goog.string.regExpEscape(s)]( * http://docs.closure-library.googlecode.com/git/closure_goog_string_string.js.source.html#line962). * * Refer {@link ng.$sceDelegateProvider $sceDelegateProvider} for an example. * * ## Show me an example using SCE. * * * * * * User comments * By default, HTML that isn't explicitly trusted (e.g. Alice's comment) is sanitized when * $sanitize is available. If $sanitize isn't available, this results in an error instead of an * exploit. * * * {{userComment.name}}: * * * * * * * * * angular.module('mySceApp', ['ngSanitize']) * .controller('AppController', ['$http', '$templateCache', '$sce', * function($http, $templateCache, $sce) { * var self = this; * $http.get("test_data.json", {cache: $templateCache}).success(function(userComments) { * self.userComments = userComments; * }); * self.explicitlyTrustedHtml = $sce.trustAsHtml( * 'Hover over this text.'); * }]); * * * * [ * { "name": "Alice", * "htmlComment": * "Is anyone reading this?" * }, * { "name": "Bob", * "htmlComment": "Yes! Am I the only other one?" * } * ] * * * * describe('SCE doc demo', function() { * it('should sanitize untrusted values', function() { * expect(element.all(by.css('.htmlComment')).first().getInnerHtml()) * .toBe('Is anyone reading this?'); * }); * * it('should NOT sanitize explicitly trusted values', function() { * expect(element(by.id('explicitlyTrustedHtml')).getInnerHtml()).toBe( * 'Hover over this text.'); * }); * }); * * * * * * ## Can I disable SCE completely? * * Yes, you can. However, this is strongly discouraged. SCE gives you a lot of security benefits * for little coding overhead. It will be much harder to take an SCE disabled application and * either secure it on your own or enable SCE at a later stage. It might make sense to disable SCE * for cases where you have a lot of existing code that was written before SCE was introduced and * you're migrating them a module at a time. * * That said, here's how you can completely disable SCE: * * ``` * angular.module('myAppWithSceDisabledmyApp', []).config(function($sceProvider) { * // Completely disable SCE. For demonstration purposes only! * // Do not use in new projects. * $sceProvider.enabled(false); * }); * ``` * */ /* jshint maxlen: 100 */ function $SceProvider() { var enabled = true; /** * @ngdoc method * @name $sceProvider#enabled * @kind function * * @param {boolean=} value If provided, then enables/disables SCE. * @return {boolean} true if SCE is enabled, false otherwise. * * @description * Enables/disables SCE and returns the current value. */ this.enabled = function(value) { if (arguments.length) { enabled = !!value; } return enabled; }; /* Design notes on the default implementation for SCE. * * The API contract for the SCE delegate * ------------------------------------- * The SCE delegate object must provide the following 3 methods: * * - trustAs(contextEnum, value) * This method is used to tell the SCE service that the provided value is OK to use in the * contexts specified by contextEnum. It must return an object that will be accepted by * getTrusted() for a compatible contextEnum and return this value. * * - valueOf(value) * For values that were not produced by trustAs(), return them as is. For values that were * produced by trustAs(), return the corresponding input value to trustAs. Basically, if * trustAs is wrapping the given values into some type, this operation unwraps it when given * such a value. * * - getTrusted(contextEnum, value) * This function should return the a value that is safe to use in the context specified by * contextEnum or throw and exception otherwise. * * NOTE: This contract deliberately does NOT state that values returned by trustAs() must be * opaque or wrapped in some holder object. That happens to be an implementation detail. For * instance, an implementation could maintain a registry of all trusted objects by context. In * such a case, trustAs() would return the same object that was passed in. getTrusted() would * return the same object passed in if it was found in the registry under a compatible context or * throw an exception otherwise. An implementation might only wrap values some of the time based * on some criteria. getTrusted() might return a value and not throw an exception for special * constants or objects even if not wrapped. All such implementations fulfill this contract. * * * A note on the inheritance model for SCE contexts * ------------------------------------------------ * I've used inheritance and made RESOURCE_URL wrapped types a subtype of URL wrapped types. This * is purely an implementation details. * * The contract is simply this: * * getTrusted($sce.RESOURCE_URL, value) succeeding implies that getTrusted($sce.URL, value) * will also succeed. * * Inheritance happens to capture this in a natural way. In some future, we * may not use inheritance anymore. That is OK because no code outside of * sce.js and sceSpecs.js would need to be aware of this detail. */ this.$get = ['$parse', '$sceDelegate', function( $parse, $sceDelegate) { // Prereq: Ensure that we're not running in IE<11 quirks mode. In that mode, IE < 11 allow // the "expression(javascript expression)" syntax which is insecure. if (enabled && msie < 8) { throw $sceMinErr('iequirks', 'Strict Contextual Escaping does not support Internet Explorer version < 11 in quirks ' + 'mode. You can fix this by adding the text to the top of your HTML ' + 'document. See http://docs.angularjs.org/api/ng.$sce for more information.'); } var sce = shallowCopy(SCE_CONTEXTS); /** * @ngdoc method * @name $sce#isEnabled * @kind function * * @return {Boolean} true if SCE is enabled, false otherwise. If you want to set the value, you * have to do it at module config time on {@link ng.$sceProvider $sceProvider}. * * @description * Returns a boolean indicating if SCE is enabled. */ sce.isEnabled = function() { return enabled; }; sce.trustAs = $sceDelegate.trustAs; sce.getTrusted = $sceDelegate.getTrusted; sce.valueOf = $sceDelegate.valueOf; if (!enabled) { sce.trustAs = sce.getTrusted = function(type, value) { return value; }; sce.valueOf = identity; } /** * @ngdoc method * @name $sce#parseAs * * @description * Converts Angular {@link guide/expression expression} into a function. This is like {@link * ng.$parse $parse} and is identical when the expression is a literal constant. Otherwise, it * wraps the expression in a call to {@link ng.$sce#getTrusted $sce.getTrusted(*type*, * *result*)} * * @param {string} type The kind of SCE context in which this result will be used. * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ sce.parseAs = function sceParseAs(type, expr) { var parsed = $parse(expr); if (parsed.literal && parsed.constant) { return parsed; } else { return $parse(expr, function(value) { return sce.getTrusted(type, value); }); } }; /** * @ngdoc method * @name $sce#trustAs * * @description * Delegates to {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs`}. As such, * returns an object that is trusted by angular for use in specified strict contextual * escaping contexts (such as ng-bind-html, ng-include, any src attribute * interpolation, any dom event binding attribute interpolation such as for onclick, etc.) * that uses the provided value. See * {@link ng.$sce $sce} for enabling strict contextual * escaping. * * @param {string} type The kind of context in which this value is safe for use. e.g. url, * resourceUrl, html, js and css. * @param {*} value The value that that should be considered trusted/safe. * @returns {*} A value that can be used to stand in for the provided `value` in places * where Angular expects a $sce.trustAs() return value. */ /** * @ngdoc method * @name $sce#trustAsHtml * * @description * Shorthand method. `$sce.trustAsHtml(value)` → * {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.HTML, value)`} * * @param {*} value The value to trustAs. * @returns {*} An object that can be passed to {@link ng.$sce#getTrustedHtml * $sce.getTrustedHtml(value)} to obtain the original value. (privileged directives * only accept expressions that are either literal constants or are the * return value of {@link ng.$sce#trustAs $sce.trustAs}.) */ /** * @ngdoc method * @name $sce#trustAsUrl * * @description * Shorthand method. `$sce.trustAsUrl(value)` → * {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.URL, value)`} * * @param {*} value The value to trustAs. * @returns {*} An object that can be passed to {@link ng.$sce#getTrustedUrl * $sce.getTrustedUrl(value)} to obtain the original value. (privileged directives * only accept expressions that are either literal constants or are the * return value of {@link ng.$sce#trustAs $sce.trustAs}.) */ /** * @ngdoc method * @name $sce#trustAsResourceUrl * * @description * Shorthand method. `$sce.trustAsResourceUrl(value)` → * {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.RESOURCE_URL, value)`} * * @param {*} value The value to trustAs. * @returns {*} An object that can be passed to {@link ng.$sce#getTrustedResourceUrl * $sce.getTrustedResourceUrl(value)} to obtain the original value. (privileged directives * only accept expressions that are either literal constants or are the return * value of {@link ng.$sce#trustAs $sce.trustAs}.) */ /** * @ngdoc method * @name $sce#trustAsJs * * @description * Shorthand method. `$sce.trustAsJs(value)` → * {@link ng.$sceDelegate#trustAs `$sceDelegate.trustAs($sce.JS, value)`} * * @param {*} value The value to trustAs. * @returns {*} An object that can be passed to {@link ng.$sce#getTrustedJs * $sce.getTrustedJs(value)} to obtain the original value. (privileged directives * only accept expressions that are either literal constants or are the * return value of {@link ng.$sce#trustAs $sce.trustAs}.) */ /** * @ngdoc method * @name $sce#getTrusted * * @description * Delegates to {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted`}. As such, * takes the result of a {@link ng.$sce#trustAs `$sce.trustAs`}() call and returns the * originally supplied value if the queried context type is a supertype of the created type. * If this condition isn't satisfied, throws an exception. * * @param {string} type The kind of context in which this value is to be used. * @param {*} maybeTrusted The result of a prior {@link ng.$sce#trustAs `$sce.trustAs`} * call. * @returns {*} The value the was originally provided to * {@link ng.$sce#trustAs `$sce.trustAs`} if valid in this context. * Otherwise, throws an exception. */ /** * @ngdoc method * @name $sce#getTrustedHtml * * @description * Shorthand method. `$sce.getTrustedHtml(value)` → * {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.HTML, value)`} * * @param {*} value The value to pass to `$sce.getTrusted`. * @returns {*} The return value of `$sce.getTrusted($sce.HTML, value)` */ /** * @ngdoc method * @name $sce#getTrustedCss * * @description * Shorthand method. `$sce.getTrustedCss(value)` → * {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.CSS, value)`} * * @param {*} value The value to pass to `$sce.getTrusted`. * @returns {*} The return value of `$sce.getTrusted($sce.CSS, value)` */ /** * @ngdoc method * @name $sce#getTrustedUrl * * @description * Shorthand method. `$sce.getTrustedUrl(value)` → * {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.URL, value)`} * * @param {*} value The value to pass to `$sce.getTrusted`. * @returns {*} The return value of `$sce.getTrusted($sce.URL, value)` */ /** * @ngdoc method * @name $sce#getTrustedResourceUrl * * @description * Shorthand method. `$sce.getTrustedResourceUrl(value)` → * {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.RESOURCE_URL, value)`} * * @param {*} value The value to pass to `$sceDelegate.getTrusted`. * @returns {*} The return value of `$sce.getTrusted($sce.RESOURCE_URL, value)` */ /** * @ngdoc method * @name $sce#getTrustedJs * * @description * Shorthand method. `$sce.getTrustedJs(value)` → * {@link ng.$sceDelegate#getTrusted `$sceDelegate.getTrusted($sce.JS, value)`} * * @param {*} value The value to pass to `$sce.getTrusted`. * @returns {*} The return value of `$sce.getTrusted($sce.JS, value)` */ /** * @ngdoc method * @name $sce#parseAsHtml * * @description * Shorthand method. `$sce.parseAsHtml(expression string)` → * {@link ng.$sce#parseAs `$sce.parseAs($sce.HTML, value)`} * * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ /** * @ngdoc method * @name $sce#parseAsCss * * @description * Shorthand method. `$sce.parseAsCss(value)` → * {@link ng.$sce#parseAs `$sce.parseAs($sce.CSS, value)`} * * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ /** * @ngdoc method * @name $sce#parseAsUrl * * @description * Shorthand method. `$sce.parseAsUrl(value)` → * {@link ng.$sce#parseAs `$sce.parseAs($sce.URL, value)`} * * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ /** * @ngdoc method * @name $sce#parseAsResourceUrl * * @description * Shorthand method. `$sce.parseAsResourceUrl(value)` → * {@link ng.$sce#parseAs `$sce.parseAs($sce.RESOURCE_URL, value)`} * * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ /** * @ngdoc method * @name $sce#parseAsJs * * @description * Shorthand method. `$sce.parseAsJs(value)` → * {@link ng.$sce#parseAs `$sce.parseAs($sce.JS, value)`} * * @param {string} expression String expression to compile. * @returns {function(context, locals)} a function which represents the compiled expression: * * * `context` – `{object}` – an object against which any expressions embedded in the strings * are evaluated against (typically a scope object). * * `locals` – `{object=}` – local variables context object, useful for overriding values in * `context`. */ // Shorthand delegations. var parse = sce.parseAs, getTrusted = sce.getTrusted, trustAs = sce.trustAs; forEach(SCE_CONTEXTS, function(enumValue, name) { var lName = lowercase(name); sce[camelCase("parse_as_" + lName)] = function(expr) { return parse(enumValue, expr); }; sce[camelCase("get_trusted_" + lName)] = function(value) { return getTrusted(enumValue, value); }; sce[camelCase("trust_as_" + lName)] = function(value) { return trustAs(enumValue, value); }; }); return sce; }]; } /** * !!! This is an undocumented "private" service !!! * * @name $sniffer * @requires $window * @requires $document * * @property {boolean} history Does the browser support html5 history api ? * @property {boolean} transitions Does the browser support CSS transition events ? * @property {boolean} animations Does the browser support CSS animation events ? * * @description * This is very simple implementation of testing browser's features. */ function $SnifferProvider() { this.$get = ['$window', '$document', function($window, $document) { var eventSupport = {}, // Chrome Packaged Apps are not allowed to access `history.pushState`. They can be detected by // the presence of `chrome.app.runtime` (see https://developer.chrome.com/apps/api_index) isChromePackagedApp = $window.chrome && $window.chrome.app && $window.chrome.app.runtime, hasHistoryPushState = !isChromePackagedApp && $window.history && $window.history.pushState, android = toInt((/android (\d+)/.exec(lowercase(($window.navigator || {}).userAgent)) || [])[1]), boxee = /Boxee/i.test(($window.navigator || {}).userAgent), document = $document[0] || {}, vendorPrefix, vendorRegex = /^(Moz|webkit|ms)(?=[A-Z])/, bodyStyle = document.body && document.body.style, transitions = false, animations = false, match; if (bodyStyle) { for (var prop in bodyStyle) { if (match = vendorRegex.exec(prop)) { vendorPrefix = match[0]; vendorPrefix = vendorPrefix.substr(0, 1).toUpperCase() + vendorPrefix.substr(1); break; } } if (!vendorPrefix) { vendorPrefix = ('WebkitOpacity' in bodyStyle) && 'webkit'; } transitions = !!(('transition' in bodyStyle) || (vendorPrefix + 'Transition' in bodyStyle)); animations = !!(('animation' in bodyStyle) || (vendorPrefix + 'Animation' in bodyStyle)); if (android && (!transitions || !animations)) { transitions = isString(bodyStyle.webkitTransition); animations = isString(bodyStyle.webkitAnimation); } } return { // Android has history.pushState, but it does not update location correctly // so let's not use the history API at all. // http://code.google.com/p/android/issues/detail?id=17471 // https://github.com/angular/angular.js/issues/904 // older webkit browser (533.9) on Boxee box has exactly the same problem as Android has // so let's not use the history API also // We are purposefully using `!(android < 4)` to cover the case when `android` is undefined // jshint -W018 history: !!(hasHistoryPushState && !(android < 4) && !boxee), // jshint +W018 hasEvent: function(event) { // IE9 implements 'input' event it's so fubared that we rather pretend that it doesn't have // it. In particular the event is not fired when backspace or delete key are pressed or // when cut operation is performed. // IE10+ implements 'input' event but it erroneously fires under various situations, // e.g. when placeholder changes, or a form is focused. if (event === 'input' && msie <= 11) return false; if (isUndefined(eventSupport[event])) { var divElm = document.createElement('div'); eventSupport[event] = 'on' + event in divElm; } return eventSupport[event]; }, csp: csp(), vendorPrefix: vendorPrefix, transitions: transitions, animations: animations, android: android }; }]; } var $templateRequestMinErr = minErr('$compile'); /** * @ngdoc provider * @name $templateRequestProvider * @description * Used to configure the options passed to the {@link $http} service when making a template request. * * For example, it can be used for specifying the "Accept" header that is sent to the server, when * requesting a template. */ function $TemplateRequestProvider() { var httpOptions; /** * @ngdoc method * @name $templateRequestProvider#httpOptions * @description * The options to be passed to the {@link $http} service when making the request. * You can use this to override options such as the "Accept" header for template requests. * * The {@link $templateRequest} will set the `cache` and the `transformResponse` properties of the * options if not overridden here. * * @param {string=} value new value for the {@link $http} options. * @returns {string|self} Returns the {@link $http} options when used as getter and self if used as setter. */ this.httpOptions = function(val) { if (val) { httpOptions = val; return this; } return httpOptions; }; /** * @ngdoc service * @name $templateRequest * * @description * The `$templateRequest` service runs security checks then downloads the provided template using * `$http` and, upon success, stores the contents inside of `$templateCache`. If the HTTP request * fails or the response data of the HTTP request is empty, a `$compile` error will be thrown (the * exception can be thwarted by setting the 2nd parameter of the function to true). Note that the * contents of `$templateCache` are trusted, so the call to `$sce.getTrustedUrl(tpl)` is omitted * when `tpl` is of type string and `$templateCache` has the matching entry. * * If you want to pass custom options to the `$http` service, such as setting the Accept header you * can configure this via {@link $templateRequestProvider#httpOptions}. * * @param {string|TrustedResourceUrl} tpl The HTTP request template URL * @param {boolean=} ignoreRequestError Whether or not to ignore the exception when the request fails or the template is empty * * @return {Promise} a promise for the HTTP response data of the given URL. * * @property {number} totalPendingRequests total amount of pending template requests being downloaded. */ this.$get = ['$templateCache', '$http', '$q', '$sce', function($templateCache, $http, $q, $sce) { function handleRequestFn(tpl, ignoreRequestError) { handleRequestFn.totalPendingRequests++; // We consider the template cache holds only trusted templates, so // there's no need to go through whitelisting again for keys that already // are included in there. This also makes Angular accept any script // directive, no matter its name. However, we still need to unwrap trusted // types. if (!isString(tpl) || !$templateCache.get(tpl)) { tpl = $sce.getTrustedResourceUrl(tpl); } var transformResponse = $http.defaults && $http.defaults.transformResponse; if (isArray(transformResponse)) { transformResponse = transformResponse.filter(function(transformer) { return transformer !== defaultHttpResponseTransform; }); } else if (transformResponse === defaultHttpResponseTransform) { transformResponse = null; } return $http.get(tpl, extend({ cache: $templateCache, transformResponse: transformResponse }, httpOptions)) ['finally'](function() { handleRequestFn.totalPendingRequests--; }) .then(function(response) { $templateCache.put(tpl, response.data); return response.data; }, handleError); function handleError(resp) { if (!ignoreRequestError) { throw $templateRequestMinErr('tpload', 'Failed to load template: {0} (HTTP status: {1} {2})', tpl, resp.status, resp.statusText); } return $q.reject(resp); } } handleRequestFn.totalPendingRequests = 0; return handleRequestFn; }]; } function $$TestabilityProvider() { this.$get = ['$rootScope', '$browser', '$location', function($rootScope, $browser, $location) { /** * @name $testability * * @description * The private $$testability service provides a collection of methods for use when debugging * or by automated test and debugging tools. */ var testability = {}; /** * @name $$testability#findBindings * * @description * Returns an array of elements that are bound (via ng-bind or {{}}) * to expressions matching the input. * * @param {Element} element The element root to search from. * @param {string} expression The binding expression to match. * @param {boolean} opt_exactMatch If true, only returns exact matches * for the expression. Filters and whitespace are ignored. */ testability.findBindings = function(element, expression, opt_exactMatch) { var bindings = element.getElementsByClassName('ng-binding'); var matches = []; forEach(bindings, function(binding) { var dataBinding = angular.element(binding).data('$binding'); if (dataBinding) { forEach(dataBinding, function(bindingName) { if (opt_exactMatch) { var matcher = new RegExp('(^|\\s)' + escapeForRegexp(expression) + '(\\s|\\||$)'); if (matcher.test(bindingName)) { matches.push(binding); } } else { if (bindingName.indexOf(expression) != -1) { matches.push(binding); } } }); } }); return matches; }; /** * @name $$testability#findModels * * @description * Returns an array of elements that are two-way found via ng-model to * expressions matching the input. * * @param {Element} element The element root to search from. * @param {string} expression The model expression to match. * @param {boolean} opt_exactMatch If true, only returns exact matches * for the expression. */ testability.findModels = function(element, expression, opt_exactMatch) { var prefixes = ['ng-', 'data-ng-', 'ng\\:']; for (var p = 0; p < prefixes.length; ++p) { var attributeEquals = opt_exactMatch ? '=' : '*='; var selector = '[' + prefixes[p] + 'model' + attributeEquals + '"' + expression + '"]'; var elements = element.querySelectorAll(selector); if (elements.length) { return elements; } } }; /** * @name $$testability#getLocation * * @description * Shortcut for getting the location in a browser agnostic way. Returns * the path, search, and hash. (e.g. /path?a=b#hash) */ testability.getLocation = function() { return $location.url(); }; /** * @name $$testability#setLocation * * @description * Shortcut for navigating to a location without doing a full page reload. * * @param {string} url The location url (path, search and hash, * e.g. /path?a=b#hash) to go to. */ testability.setLocation = function(url) { if (url !== $location.url()) { $location.url(url); $rootScope.$digest(); } }; /** * @name $$testability#whenStable * * @description * Calls the callback when $timeout and $http requests are completed. * * @param {function} callback */ testability.whenStable = function(callback) { $browser.notifyWhenNoOutstandingRequests(callback); }; return testability; }]; } function $TimeoutProvider() { this.$get = ['$rootScope', '$browser', '$q', '$$q', '$exceptionHandler', function($rootScope, $browser, $q, $$q, $exceptionHandler) { var deferreds = {}; /** * @ngdoc service * @name $timeout * * @description * Angular's wrapper for `window.setTimeout`. The `fn` function is wrapped into a try/catch * block and delegates any exceptions to * {@link ng.$exceptionHandler $exceptionHandler} service. * * The return value of calling `$timeout` is a promise, which will be resolved when * the delay has passed and the timeout function, if provided, is executed. * * To cancel a timeout request, call `$timeout.cancel(promise)`. * * In tests you can use {@link ngMock.$timeout `$timeout.flush()`} to * synchronously flush the queue of deferred functions. * * If you only want a promise that will be resolved after some specified delay * then you can call `$timeout` without the `fn` function. * * @param {function()=} fn A function, whose execution should be delayed. * @param {number=} [delay=0] Delay in milliseconds. * @param {boolean=} [invokeApply=true] If set to `false` skips model dirty checking, otherwise * will invoke `fn` within the {@link ng.$rootScope.Scope#$apply $apply} block. * @param {...*=} Pass additional parameters to the executed function. * @returns {Promise} Promise that will be resolved when the timeout is reached. The promise * will be resolved with the return value of the `fn` function. * */ function timeout(fn, delay, invokeApply) { if (!isFunction(fn)) { invokeApply = delay; delay = fn; fn = noop; } var args = sliceArgs(arguments, 3), skipApply = (isDefined(invokeApply) && !invokeApply), deferred = (skipApply ? $$q : $q).defer(), promise = deferred.promise, timeoutId; timeoutId = $browser.defer(function() { try { deferred.resolve(fn.apply(null, args)); } catch (e) { deferred.reject(e); $exceptionHandler(e); } finally { delete deferreds[promise.$$timeoutId]; } if (!skipApply) $rootScope.$apply(); }, delay); promise.$$timeoutId = timeoutId; deferreds[timeoutId] = deferred; return promise; } /** * @ngdoc method * @name $timeout#cancel * * @description * Cancels a task associated with the `promise`. As a result of this, the promise will be * resolved with a rejection. * * @param {Promise=} promise Promise returned by the `$timeout` function. * @returns {boolean} Returns `true` if the task hasn't executed yet and was successfully * canceled. */ timeout.cancel = function(promise) { if (promise && promise.$$timeoutId in deferreds) { deferreds[promise.$$timeoutId].reject('canceled'); delete deferreds[promise.$$timeoutId]; return $browser.defer.cancel(promise.$$timeoutId); } return false; }; return timeout; }]; } // NOTE: The usage of window and document instead of $window and $document here is // deliberate. This service depends on the specific behavior of anchor nodes created by the // browser (resolving and parsing URLs) that is unlikely to be provided by mock objects and // cause us to break tests. In addition, when the browser resolves a URL for XHR, it // doesn't know about mocked locations and resolves URLs to the real document - which is // exactly the behavior needed here. There is little value is mocking these out for this // service. var urlParsingNode = window.document.createElement("a"); var originUrl = urlResolve(window.location.href); /** * * Implementation Notes for non-IE browsers * ---------------------------------------- * Assigning a URL to the href property of an anchor DOM node, even one attached to the DOM, * results both in the normalizing and parsing of the URL. Normalizing means that a relative * URL will be resolved into an absolute URL in the context of the application document. * Parsing means that the anchor node's host, hostname, protocol, port, pathname and related * properties are all populated to reflect the normalized URL. This approach has wide * compatibility - Safari 1+, Mozilla 1+, Opera 7+,e etc. See * http://www.aptana.com/reference/html/api/HTMLAnchorElement.html * * Implementation Notes for IE * --------------------------- * IE <= 10 normalizes the URL when assigned to the anchor node similar to the other * browsers. However, the parsed components will not be set if the URL assigned did not specify * them. (e.g. if you assign a.href = "foo", then a.protocol, a.host, etc. will be empty.) We * work around that by performing the parsing in a 2nd step by taking a previously normalized * URL (e.g. by assigning to a.href) and assigning it a.href again. This correctly populates the * properties such as protocol, hostname, port, etc. * * References: * http://developer.mozilla.org/en-US/docs/Web/API/HTMLAnchorElement * http://www.aptana.com/reference/html/api/HTMLAnchorElement.html * http://url.spec.whatwg.org/#urlutils * https://github.com/angular/angular.js/pull/2902 * http://james.padolsey.com/javascript/parsing-urls-with-the-dom/ * * @kind function * @param {string} url The URL to be parsed. * @description Normalizes and parses a URL. * @returns {object} Returns the normalized URL as a dictionary. * * | member name | Description | * |---------------|----------------| * | href | A normalized version of the provided URL if it was not an absolute URL | * | protocol | The protocol including the trailing colon | * | host | The host and port (if the port is non-default) of the normalizedUrl | * | search | The search params, minus the question mark | * | hash | The hash string, minus the hash symbol * | hostname | The hostname * | port | The port, without ":" * | pathname | The pathname, beginning with "/" * */ function urlResolve(url) { var href = url; if (msie) { // Normalize before parse. Refer Implementation Notes on why this is // done in two steps on IE. urlParsingNode.setAttribute("href", href); href = urlParsingNode.href; } urlParsingNode.setAttribute('href', href); // urlParsingNode provides the UrlUtils interface - http://url.spec.whatwg.org/#urlutils return { href: urlParsingNode.href, protocol: urlParsingNode.protocol ? urlParsingNode.protocol.replace(/:$/, '') : '', host: urlParsingNode.host, search: urlParsingNode.search ? urlParsingNode.search.replace(/^\?/, '') : '', hash: urlParsingNode.hash ? urlParsingNode.hash.replace(/^#/, '') : '', hostname: urlParsingNode.hostname, port: urlParsingNode.port, pathname: (urlParsingNode.pathname.charAt(0) === '/') ? urlParsingNode.pathname : '/' + urlParsingNode.pathname }; } /** * Parse a request URL and determine whether this is a same-origin request as the application document. * * @param {string|object} requestUrl The url of the request as a string that will be resolved * or a parsed URL object. * @returns {boolean} Whether the request is for the same origin as the application document. */ function urlIsSameOrigin(requestUrl) { var parsed = (isString(requestUrl)) ? urlResolve(requestUrl) : requestUrl; return (parsed.protocol === originUrl.protocol && parsed.host === originUrl.host); } /** * @ngdoc service * @name $window * * @description * A reference to the browser's `window` object. While `window` * is globally available in JavaScript, it causes testability problems, because * it is a global variable. In angular we always refer to it through the * `$window` service, so it may be overridden, removed or mocked for testing. * * Expressions, like the one defined for the `ngClick` directive in the example * below, are evaluated with respect to the current scope. Therefore, there is * no risk of inadvertently coding in a dependency on a global value in such an * expression. * * @example ALERT it('should display the greeting in the input box', function() { element(by.model('greeting')).sendKeys('Hello, E2E Tests'); // If we click the button it will block the test runner // element(':button').click(); }); */ function $WindowProvider() { this.$get = valueFn(window); } /** * @name $$cookieReader * @requires $document * * @description * This is a private service for reading cookies used by $http and ngCookies * * @return {Object} a key/value map of the current cookies */ function $$CookieReader($document) { var rawDocument = $document[0] || {}; var lastCookies = {}; var lastCookieString = ''; function safeDecodeURIComponent(str) { try { return decodeURIComponent(str); } catch (e) { return str; } } return function() { var cookieArray, cookie, i, index, name; var currentCookieString = rawDocument.cookie || ''; if (currentCookieString !== lastCookieString) { lastCookieString = currentCookieString; cookieArray = lastCookieString.split('; '); lastCookies = {}; for (i = 0; i < cookieArray.length; i++) { cookie = cookieArray[i]; index = cookie.indexOf('='); if (index > 0) { //ignore nameless cookies name = safeDecodeURIComponent(cookie.substring(0, index)); // the first value that is seen for a cookie is the most // specific one. values for the same cookie name that // follow are for less specific paths. if (isUndefined(lastCookies[name])) { lastCookies[name] = safeDecodeURIComponent(cookie.substring(index + 1)); } } } } return lastCookies; }; } $$CookieReader.$inject = ['$document']; function $$CookieReaderProvider() { this.$get = $$CookieReader; } /* global currencyFilter: true, dateFilter: true, filterFilter: true, jsonFilter: true, limitToFilter: true, lowercaseFilter: true, numberFilter: true, orderByFilter: true, uppercaseFilter: true, */ /** * @ngdoc provider * @name $filterProvider * @description * * Filters are just functions which transform input to an output. However filters need to be * Dependency Injected. To achieve this a filter definition consists of a factory function which is * annotated with dependencies and is responsible for creating a filter function. * * * **Note:** Filter names must be valid angular {@link expression} identifiers, such as `uppercase` or `orderBy`. * Names with special characters, such as hyphens and dots, are not allowed. If you wish to namespace * your filters, then you can use capitalization (`myappSubsectionFilterx`) or underscores * (`myapp_subsection_filterx`). * * * ```js * // Filter registration * function MyModule($provide, $filterProvider) { * // create a service to demonstrate injection (not always needed) * $provide.value('greet', function(name){ * return 'Hello ' + name + '!'; * }); * * // register a filter factory which uses the * // greet service to demonstrate DI. * $filterProvider.register('greet', function(greet){ * // return the filter function which uses the greet service * // to generate salutation * return function(text) { * // filters need to be forgiving so check input validity * return text && greet(text) || text; * }; * }); * } * ``` * * The filter function is registered with the `$injector` under the filter name suffix with * `Filter`. * * ```js * it('should be the same instance', inject( * function($filterProvider) { * $filterProvider.register('reverse', function(){ * return ...; * }); * }, * function($filter, reverseFilter) { * expect($filter('reverse')).toBe(reverseFilter); * }); * ``` * * * For more information about how angular filters work, and how to create your own filters, see * {@link guide/filter Filters} in the Angular Developer Guide. */ /** * @ngdoc service * @name $filter * @kind function * @description * Filters are used for formatting data displayed to the user. * * The general syntax in templates is as follows: * * {{ expression [| filter_name[:parameter_value] ... ] }} * * @param {String} name Name of the filter function to retrieve * @return {Function} the filter function * @example {{ originalText }} {{ filteredText }} angular.module('filterExample', []) .controller('MainCtrl', function($scope, $filter) { $scope.originalText = 'hello'; $scope.filteredText = $filter('uppercase')($scope.originalText); }); */ $FilterProvider.$inject = ['$provide']; function $FilterProvider($provide) { var suffix = 'Filter'; /** * @ngdoc method * @name $filterProvider#register * @param {string|Object} name Name of the filter function, or an object map of filters where * the keys are the filter names and the values are the filter factories. * * * **Note:** Filter names must be valid angular {@link expression} identifiers, such as `uppercase` or `orderBy`. * Names with special characters, such as hyphens and dots, are not allowed. If you wish to namespace * your filters, then you can use capitalization (`myappSubsectionFilterx`) or underscores * (`myapp_subsection_filterx`). * * @param {Function} factory If the first argument was a string, a factory function for the filter to be registered. * @returns {Object} Registered filter instance, or if a map of filters was provided then a map * of the registered filter instances. */ function register(name, factory) { if (isObject(name)) { var filters = {}; forEach(name, function(filter, key) { filters[key] = register(key, filter); }); return filters; } else { return $provide.factory(name + suffix, factory); } } this.register = register; this.$get = ['$injector', function($injector) { return function(name) { return $injector.get(name + suffix); }; }]; //////////////////////////////////////// /* global currencyFilter: false, dateFilter: false, filterFilter: false, jsonFilter: false, limitToFilter: false, lowercaseFilter: false, numberFilter: false, orderByFilter: false, uppercaseFilter: false, */ register('currency', currencyFilter); register('date', dateFilter); register('filter', filterFilter); register('json', jsonFilter); register('limitTo', limitToFilter); register('lowercase', lowercaseFilter); register('number', numberFilter); register('orderBy', orderByFilter); register('uppercase', uppercaseFilter); } /** * @ngdoc filter * @name filter * @kind function * * @description * Selects a subset of items from `array` and returns it as a new array. * * @param {Array} array The source array. * @param {string|Object|function()} expression The predicate to be used for selecting items from * `array`. * * Can be one of: * * - `string`: The string is used for matching against the contents of the `array`. All strings or * objects with string properties in `array` that match this string will be returned. This also * applies to nested object properties. * The predicate can be negated by prefixing the string with `!`. * * - `Object`: A pattern object can be used to filter specific properties on objects contained * by `array`. For example `{name:"M", phone:"1"}` predicate will return an array of items * which have property `name` containing "M" and property `phone` containing "1". A special * property name `$` can be used (as in `{$:"text"}`) to accept a match against any * property of the object or its nested object properties. That's equivalent to the simple * substring match with a `string` as described above. The predicate can be negated by prefixing * the string with `!`. * For example `{name: "!M"}` predicate will return an array of items which have property `name` * not containing "M". * * Note that a named property will match properties on the same level only, while the special * `$` property will match properties on the same level or deeper. E.g. an array item like * `{name: {first: 'John', last: 'Doe'}}` will **not** be matched by `{name: 'John'}`, but * **will** be matched by `{$: 'John'}`. * * - `function(value, index, array)`: A predicate function can be used to write arbitrary filters. * The function is called for each element of the array, with the element, its index, and * the entire array itself as arguments. * * The final result is an array of those elements that the predicate returned true for. * * @param {function(actual, expected)|true|undefined} comparator Comparator which is used in * determining if the expected value (from the filter expression) and actual value (from * the object in the array) should be considered a match. * * Can be one of: * * - `function(actual, expected)`: * The function will be given the object value and the predicate value to compare and * should return true if both values should be considered equal. * * - `true`: A shorthand for `function(actual, expected) { return angular.equals(actual, expected)}`. * This is essentially strict comparison of expected and actual. * * - `false|undefined`: A short hand for a function which will look for a substring match in case * insensitive way. * * Primitive values are converted to strings. Objects are not compared against primitives, * unless they have a custom `toString` method (e.g. `Date` objects). * * @example Search: NamePhone {{friend.name}} {{friend.phone}} Any: Name only Phone only Equality NamePhone {{friendObj.name}} {{friendObj.phone}} var expectFriendNames = function(expectedNames, key) { element.all(by.repeater(key + ' in friends').column(key + '.name')).then(function(arr) { arr.forEach(function(wd, i) { expect(wd.getText()).toMatch(expectedNames[i]); }); }); }; it('should search across all fields when filtering with a string', function() { var searchText = element(by.model('searchText')); searchText.clear(); searchText.sendKeys('m'); expectFriendNames(['Mary', 'Mike', 'Adam'], 'friend'); searchText.clear(); searchText.sendKeys('76'); expectFriendNames(['John', 'Julie'], 'friend'); }); it('should search in specific fields when filtering with a predicate object', function() { var searchAny = element(by.model('search.$')); searchAny.clear(); searchAny.sendKeys('i'); expectFriendNames(['Mary', 'Mike', 'Julie', 'Juliette'], 'friendObj'); }); it('should use a equal comparison when comparator is true', function() { var searchName = element(by.model('search.name')); var strict = element(by.model('strict')); searchName.clear(); searchName.sendKeys('Julie'); strict.click(); expectFriendNames(['Julie'], 'friendObj'); }); */ function filterFilter() { return function(array, expression, comparator) { if (!isArrayLike(array)) { if (array == null) { return array; } else { throw minErr('filter')('notarray', 'Expected array but received: {0}', array); } } var expressionType = getTypeForFilter(expression); var predicateFn; var matchAgainstAnyProp; switch (expressionType) { case 'function': predicateFn = expression; break; case 'boolean': case 'null': case 'number': case 'string': matchAgainstAnyProp = true; //jshint -W086 case 'object': //jshint +W086 predicateFn = createPredicateFn(expression, comparator, matchAgainstAnyProp); break; default: return array; } return Array.prototype.filter.call(array, predicateFn); }; } // Helper functions for `filterFilter` function createPredicateFn(expression, comparator, matchAgainstAnyProp) { var shouldMatchPrimitives = isObject(expression) && ('$' in expression); var predicateFn; if (comparator === true) { comparator = equals; } else if (!isFunction(comparator)) { comparator = function(actual, expected) { if (isUndefined(actual)) { // No substring matching against `undefined` return false; } if ((actual === null) || (expected === null)) { // No substring matching against `null`; only match against `null` return actual === expected; } if (isObject(expected) || (isObject(actual) && !hasCustomToString(actual))) { // Should not compare primitives against objects, unless they have custom `toString` method return false; } actual = lowercase('' + actual); expected = lowercase('' + expected); return actual.indexOf(expected) !== -1; }; } predicateFn = function(item) { if (shouldMatchPrimitives && !isObject(item)) { return deepCompare(item, expression.$, comparator, false); } return deepCompare(item, expression, comparator, matchAgainstAnyProp); }; return predicateFn; } function deepCompare(actual, expected, comparator, matchAgainstAnyProp, dontMatchWholeObject) { var actualType = getTypeForFilter(actual); var expectedType = getTypeForFilter(expected); if ((expectedType === 'string') && (expected.charAt(0) === '!')) { return !deepCompare(actual, expected.substring(1), comparator, matchAgainstAnyProp); } else if (isArray(actual)) { // In case `actual` is an array, consider it a match // if ANY of it's items matches `expected` return actual.some(function(item) { return deepCompare(item, expected, comparator, matchAgainstAnyProp); }); } switch (actualType) { case 'object': var key; if (matchAgainstAnyProp) { for (key in actual) { if ((key.charAt(0) !== '$') && deepCompare(actual[key], expected, comparator, true)) { return true; } } return dontMatchWholeObject ? false : deepCompare(actual, expected, comparator, false); } else if (expectedType === 'object') { for (key in expected) { var expectedVal = expected[key]; if (isFunction(expectedVal) || isUndefined(expectedVal)) { continue; } var matchAnyProperty = key === '$'; var actualVal = matchAnyProperty ? actual : actual[key]; if (!deepCompare(actualVal, expectedVal, comparator, matchAnyProperty, matchAnyProperty)) { return false; } } return true; } else { return comparator(actual, expected); } break; case 'function': return false; default: return comparator(actual, expected); } } // Used for easily differentiating between `null` and actual `object` function getTypeForFilter(val) { return (val === null) ? 'null' : typeof val; } var MAX_DIGITS = 22; var DECIMAL_SEP = '.'; var ZERO_CHAR = '0'; /** * @ngdoc filter * @name currency * @kind function * * @description * Formats a number as a currency (ie $1,234.56). When no currency symbol is provided, default * symbol for current locale is used. * * @param {number} amount Input to filter. * @param {string=} symbol Currency symbol or identifier to be displayed. * @param {number=} fractionSize Number of decimal places to round the amount to, defaults to default max fraction size for current locale * @returns {string} Formatted number. * * * @example default currency symbol ($): {{amount | currency}} custom currency identifier (USD$): {{amount | currency:"USD$"}} no fractions (0): {{amount | currency:"USD$":0}} it('should init with 1234.56', function() { expect(element(by.id('currency-default')).getText()).toBe('$1,234.56'); expect(element(by.id('currency-custom')).getText()).toBe('USD$1,234.56'); expect(element(by.id('currency-no-fractions')).getText()).toBe('USD$1,235'); }); it('should update', function() { if (browser.params.browser == 'safari') { // Safari does not understand the minus key. See // https://github.com/angular/protractor/issues/481 return; } element(by.model('amount')).clear(); element(by.model('amount')).sendKeys('-1234'); expect(element(by.id('currency-default')).getText()).toBe('-$1,234.00'); expect(element(by.id('currency-custom')).getText()).toBe('-USD$1,234.00'); expect(element(by.id('currency-no-fractions')).getText()).toBe('-USD$1,234'); }); */ currencyFilter.$inject = ['$locale']; function currencyFilter($locale) { var formats = $locale.NUMBER_FORMATS; return function(amount, currencySymbol, fractionSize) { if (isUndefined(currencySymbol)) { currencySymbol = formats.CURRENCY_SYM; } if (isUndefined(fractionSize)) { fractionSize = formats.PATTERNS[1].maxFrac; } // if null or undefined pass it through return (amount == null) ? amount : formatNumber(amount, formats.PATTERNS[1], formats.GROUP_SEP, formats.DECIMAL_SEP, fractionSize). replace(/\u00A4/g, currencySymbol); }; } /** * @ngdoc filter * @name number * @kind function * * @description * Formats a number as text. * * If the input is null or undefined, it will just be returned. * If the input is infinite (Infinity or -Infinity), the Infinity symbol '∞' or '-∞' is returned, respectively. * If the input is not a number an empty string is returned. * * * @param {number|string} number Number to format. * @param {(number|string)=} fractionSize Number of decimal places to round the number to. * If this is not provided then the fraction size is computed from the current locale's number * formatting pattern. In the case of the default locale, it will be 3. * @returns {string} Number rounded to `fractionSize` appropriately formatted based on the current * locale (e.g., in the en_US locale it will have "." as the decimal separator and * include "," group separators after each third digit). * * @example Enter number: Default formatting: {{val | number}} No fractions: {{val | number:0}} Negative number: {{-val | number:4}} it('should format numbers', function() { expect(element(by.id('number-default')).getText()).toBe('1,234.568'); expect(element(by.binding('val | number:0')).getText()).toBe('1,235'); expect(element(by.binding('-val | number:4')).getText()).toBe('-1,234.5679'); }); it('should update', function() { element(by.model('val')).clear(); element(by.model('val')).sendKeys('3374.333'); expect(element(by.id('number-default')).getText()).toBe('3,374.333'); expect(element(by.binding('val | number:0')).getText()).toBe('3,374'); expect(element(by.binding('-val | number:4')).getText()).toBe('-3,374.3330'); }); */ numberFilter.$inject = ['$locale']; function numberFilter($locale) { var formats = $locale.NUMBER_FORMATS; return function(number, fractionSize) { // if null or undefined pass it through return (number == null) ? number : formatNumber(number, formats.PATTERNS[0], formats.GROUP_SEP, formats.DECIMAL_SEP, fractionSize); }; } /** * Parse a number (as a string) into three components that can be used * for formatting the number. * * (Significant bits of this parse algorithm came from https://github.com/MikeMcl/big.js/) * * @param {string} numStr The number to parse * @return {object} An object describing this number, containing the following keys: * - d : an array of digits containing leading zeros as necessary * - i : the number of the digits in `d` that are to the left of the decimal point * - e : the exponent for numbers that would need more than `MAX_DIGITS` digits in `d` * */ function parse(numStr) { var exponent = 0, digits, numberOfIntegerDigits; var i, j, zeros; // Decimal point? if ((numberOfIntegerDigits = numStr.indexOf(DECIMAL_SEP)) > -1) { numStr = numStr.replace(DECIMAL_SEP, ''); } // Exponential form? if ((i = numStr.search(/e/i)) > 0) { // Work out the exponent. if (numberOfIntegerDigits < 0) numberOfIntegerDigits = i; numberOfIntegerDigits += +numStr.slice(i + 1); numStr = numStr.substring(0, i); } else if (numberOfIntegerDigits < 0) { // There was no decimal point or exponent so it is an integer. numberOfIntegerDigits = numStr.length; } // Count the number of leading zeros. for (i = 0; numStr.charAt(i) == ZERO_CHAR; i++) {/* jshint noempty: false */} if (i == (zeros = numStr.length)) { // The digits are all zero. digits = [0]; numberOfIntegerDigits = 1; } else { // Count the number of trailing zeros zeros--; while (numStr.charAt(zeros) == ZERO_CHAR) zeros--; // Trailing zeros are insignificant so ignore them numberOfIntegerDigits -= i; digits = []; // Convert string to array of digits without leading/trailing zeros. for (j = 0; i <= zeros; i++, j++) { digits[j] = +numStr.charAt(i); } } // If the number overflows the maximum allowed digits then use an exponent. if (numberOfIntegerDigits > MAX_DIGITS) { digits = digits.splice(0, MAX_DIGITS - 1); exponent = numberOfIntegerDigits - 1; numberOfIntegerDigits = 1; } return { d: digits, e: exponent, i: numberOfIntegerDigits }; } /** * Round the parsed number to the specified number of decimal places * This function changed the parsedNumber in-place */ function roundNumber(parsedNumber, fractionSize, minFrac, maxFrac) { var digits = parsedNumber.d; var fractionLen = digits.length - parsedNumber.i; // determine fractionSize if it is not specified; `+fractionSize` converts it to a number fractionSize = (isUndefined(fractionSize)) ? Math.min(Math.max(minFrac, fractionLen), maxFrac) : +fractionSize; // The index of the digit to where rounding is to occur var roundAt = fractionSize + parsedNumber.i; var digit = digits[roundAt]; if (roundAt > 0) { // Drop fractional digits beyond `roundAt` digits.splice(Math.max(parsedNumber.i, roundAt)); // Set non-fractional digits beyond `roundAt` to 0 for (var j = roundAt; j < digits.length; j++) { digits[j] = 0; } } else { // We rounded to zero so reset the parsedNumber fractionLen = Math.max(0, fractionLen); parsedNumber.i = 1; digits.length = Math.max(1, roundAt = fractionSize + 1); digits[0] = 0; for (var i = 1; i < roundAt; i++) digits[i] = 0; } if (digit >= 5) { if (roundAt - 1 < 0) { for (var k = 0; k > roundAt; k--) { digits.unshift(0); parsedNumber.i++; } digits.unshift(1); parsedNumber.i++; } else { digits[roundAt - 1]++; } } // Pad out with zeros to get the required fraction length for (; fractionLen < Math.max(0, fractionSize); fractionLen++) digits.push(0); // Do any carrying, e.g. a digit was rounded up to 10 var carry = digits.reduceRight(function(carry, d, i, digits) { d = d + carry; digits[i] = d % 10; return Math.floor(d / 10); }, 0); if (carry) { digits.unshift(carry); parsedNumber.i++; } } /** * Format a number into a string * @param {number} number The number to format * @param {{ * minFrac, // the minimum number of digits required in the fraction part of the number * maxFrac, // the maximum number of digits required in the fraction part of the number * gSize, // number of digits in each group of separated digits * lgSize, // number of digits in the last group of digits before the decimal separator * negPre, // the string to go in front of a negative number (e.g. `-` or `(`)) * posPre, // the string to go in front of a positive number * negSuf, // the string to go after a negative number (e.g. `)`) * posSuf // the string to go after a positive number * }} pattern * @param {string} groupSep The string to separate groups of number (e.g. `,`) * @param {string} decimalSep The string to act as the decimal separator (e.g. `.`) * @param {[type]} fractionSize The size of the fractional part of the number * @return {string} The number formatted as a string */ function formatNumber(number, pattern, groupSep, decimalSep, fractionSize) { if (!(isString(number) || isNumber(number)) || isNaN(number)) return ''; var isInfinity = !isFinite(number); var isZero = false; var numStr = Math.abs(number) + '', formattedText = '', parsedNumber; if (isInfinity) { formattedText = '\u221e'; } else { parsedNumber = parse(numStr); roundNumber(parsedNumber, fractionSize, pattern.minFrac, pattern.maxFrac); var digits = parsedNumber.d; var integerLen = parsedNumber.i; var exponent = parsedNumber.e; var decimals = []; isZero = digits.reduce(function(isZero, d) { return isZero && !d; }, true); // pad zeros for small numbers while (integerLen < 0) { digits.unshift(0); integerLen++; } // extract decimals digits if (integerLen > 0) { decimals = digits.splice(integerLen); } else { decimals = digits; digits = [0]; } // format the integer digits with grouping separators var groups = []; if (digits.length >= pattern.lgSize) { groups.unshift(digits.splice(-pattern.lgSize).join('')); } while (digits.length > pattern.gSize) { groups.unshift(digits.splice(-pattern.gSize).join('')); } if (digits.length) { groups.unshift(digits.join('')); } formattedText = groups.join(groupSep); // append the decimal digits if (decimals.length) { formattedText += decimalSep + decimals.join(''); } if (exponent) { formattedText += 'e+' + exponent; } } if (number < 0 && !isZero) { return pattern.negPre + formattedText + pattern.negSuf; } else { return pattern.posPre + formattedText + pattern.posSuf; } } function padNumber(num, digits, trim, negWrap) { var neg = ''; if (num < 0 || (negWrap && num <= 0)) { if (negWrap) { num = -num + 1; } else { num = -num; neg = '-'; } } num = '' + num; while (num.length < digits) num = ZERO_CHAR + num; if (trim) { num = num.substr(num.length - digits); } return neg + num; } function dateGetter(name, size, offset, trim, negWrap) { offset = offset || 0; return function(date) { var value = date['get' + name](); if (offset > 0 || value > -offset) { value += offset; } if (value === 0 && offset == -12) value = 12; return padNumber(value, size, trim, negWrap); }; } function dateStrGetter(name, shortForm, standAlone) { return function(date, formats) { var value = date['get' + name](); var propPrefix = (standAlone ? 'STANDALONE' : '') + (shortForm ? 'SHORT' : ''); var get = uppercase(propPrefix + name); return formats[get][value]; }; } function timeZoneGetter(date, formats, offset) { var zone = -1 * offset; var paddedZone = (zone >= 0) ? "+" : ""; paddedZone += padNumber(Math[zone > 0 ? 'floor' : 'ceil'](zone / 60), 2) + padNumber(Math.abs(zone % 60), 2); return paddedZone; } function getFirstThursdayOfYear(year) { // 0 = index of January var dayOfWeekOnFirst = (new Date(year, 0, 1)).getDay(); // 4 = index of Thursday (+1 to account for 1st = 5) // 11 = index of *next* Thursday (+1 account for 1st = 12) return new Date(year, 0, ((dayOfWeekOnFirst <= 4) ? 5 : 12) - dayOfWeekOnFirst); } function getThursdayThisWeek(datetime) { return new Date(datetime.getFullYear(), datetime.getMonth(), // 4 = index of Thursday datetime.getDate() + (4 - datetime.getDay())); } function weekGetter(size) { return function(date) { var firstThurs = getFirstThursdayOfYear(date.getFullYear()), thisThurs = getThursdayThisWeek(date); var diff = +thisThurs - +firstThurs, result = 1 + Math.round(diff / 6.048e8); // 6.048e8 ms per week return padNumber(result, size); }; } function ampmGetter(date, formats) { return date.getHours() < 12 ? formats.AMPMS[0] : formats.AMPMS[1]; } function eraGetter(date, formats) { return date.getFullYear() <= 0 ? formats.ERAS[0] : formats.ERAS[1]; } function longEraGetter(date, formats) { return date.getFullYear() <= 0 ? formats.ERANAMES[0] : formats.ERANAMES[1]; } var DATE_FORMATS = { yyyy: dateGetter('FullYear', 4, 0, false, true), yy: dateGetter('FullYear', 2, 0, true, true), y: dateGetter('FullYear', 1, 0, false, true), MMMM: dateStrGetter('Month'), MMM: dateStrGetter('Month', true), MM: dateGetter('Month', 2, 1), M: dateGetter('Month', 1, 1), LLLL: dateStrGetter('Month', false, true), dd: dateGetter('Date', 2), d: dateGetter('Date', 1), HH: dateGetter('Hours', 2), H: dateGetter('Hours', 1), hh: dateGetter('Hours', 2, -12), h: dateGetter('Hours', 1, -12), mm: dateGetter('Minutes', 2), m: dateGetter('Minutes', 1), ss: dateGetter('Seconds', 2), s: dateGetter('Seconds', 1), // while ISO 8601 requires fractions to be prefixed with `.` or `,` // we can be just safely rely on using `sss` since we currently don't support single or two digit fractions sss: dateGetter('Milliseconds', 3), EEEE: dateStrGetter('Day'), EEE: dateStrGetter('Day', true), a: ampmGetter, Z: timeZoneGetter, ww: weekGetter(2), w: weekGetter(1), G: eraGetter, GG: eraGetter, GGG: eraGetter, GGGG: longEraGetter }; var DATE_FORMATS_SPLIT = /((?:[^yMLdHhmsaZEwG']+)|(?:'(?:[^']|'')*')|(?:E+|y+|M+|L+|d+|H+|h+|m+|s+|a|Z|G+|w+))(.*)/, NUMBER_STRING = /^\-?\d+$/; /** * @ngdoc filter * @name date * @kind function * * @description * Formats `date` to a string based on the requested `format`. * * `format` string can be composed of the following elements: * * * `'yyyy'`: 4 digit representation of year (e.g. AD 1 => 0001, AD 2010 => 2010) * * `'yy'`: 2 digit representation of year, padded (00-99). (e.g. AD 2001 => 01, AD 2010 => 10) * * `'y'`: 1 digit representation of year, e.g. (AD 1 => 1, AD 199 => 199) * * `'MMMM'`: Month in year (January-December) * * `'MMM'`: Month in year (Jan-Dec) * * `'MM'`: Month in year, padded (01-12) * * `'M'`: Month in year (1-12) * * `'LLLL'`: Stand-alone month in year (January-December) * * `'dd'`: Day in month, padded (01-31) * * `'d'`: Day in month (1-31) * * `'EEEE'`: Day in Week,(Sunday-Saturday) * * `'EEE'`: Day in Week, (Sun-Sat) * * `'HH'`: Hour in day, padded (00-23) * * `'H'`: Hour in day (0-23) * * `'hh'`: Hour in AM/PM, padded (01-12) * * `'h'`: Hour in AM/PM, (1-12) * * `'mm'`: Minute in hour, padded (00-59) * * `'m'`: Minute in hour (0-59) * * `'ss'`: Second in minute, padded (00-59) * * `'s'`: Second in minute (0-59) * * `'sss'`: Millisecond in second, padded (000-999) * * `'a'`: AM/PM marker * * `'Z'`: 4 digit (+sign) representation of the timezone offset (-1200-+1200) * * `'ww'`: Week of year, padded (00-53). Week 01 is the week with the first Thursday of the year * * `'w'`: Week of year (0-53). Week 1 is the week with the first Thursday of the year * * `'G'`, `'GG'`, `'GGG'`: The abbreviated form of the era string (e.g. 'AD') * * `'GGGG'`: The long form of the era string (e.g. 'Anno Domini') * * `format` string can also be one of the following predefined * {@link guide/i18n localizable formats}: * * * `'medium'`: equivalent to `'MMM d, y h:mm:ss a'` for en_US locale * (e.g. Sep 3, 2010 12:05:08 PM) * * `'short'`: equivalent to `'M/d/yy h:mm a'` for en_US locale (e.g. 9/3/10 12:05 PM) * * `'fullDate'`: equivalent to `'EEEE, MMMM d, y'` for en_US locale * (e.g. Friday, September 3, 2010) * * `'longDate'`: equivalent to `'MMMM d, y'` for en_US locale (e.g. September 3, 2010) * * `'mediumDate'`: equivalent to `'MMM d, y'` for en_US locale (e.g. Sep 3, 2010) * * `'shortDate'`: equivalent to `'M/d/yy'` for en_US locale (e.g. 9/3/10) * * `'mediumTime'`: equivalent to `'h:mm:ss a'` for en_US locale (e.g. 12:05:08 PM) * * `'shortTime'`: equivalent to `'h:mm a'` for en_US locale (e.g. 12:05 PM) * * `format` string can contain literal values. These need to be escaped by surrounding with single quotes (e.g. * `"h 'in the morning'"`). In order to output a single quote, escape it - i.e., two single quotes in a sequence * (e.g. `"h 'o''clock'"`). * * @param {(Date|number|string)} date Date to format either as Date object, milliseconds (string or * number) or various ISO 8601 datetime string formats (e.g. yyyy-MM-ddTHH:mm:ss.sssZ and its * shorter versions like yyyy-MM-ddTHH:mmZ, yyyy-MM-dd or yyyyMMddTHHmmssZ). If no timezone is * specified in the string input, the time is considered to be in the local timezone. * @param {string=} format Formatting rules (see Description). If not specified, * `mediumDate` is used. * @param {string=} timezone Timezone to be used for formatting. It understands UTC/GMT and the * continental US time zone abbreviations, but for general use, use a time zone offset, for * example, `'+0430'` (4 hours, 30 minutes east of the Greenwich meridian) * If not specified, the timezone of the browser will be used. * @returns {string} Formatted string or the input if input is not recognized as date/millis. * * @example {{1288323623006 | date:'medium'}}: {{1288323623006 | date:'medium'}} {{1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'}}: {{1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'}} {{1288323623006 | date:'MM/dd/yyyy @ h:mma'}}: {{'1288323623006' | date:'MM/dd/yyyy @ h:mma'}} {{1288323623006 | date:"MM/dd/yyyy 'at' h:mma"}}: {{'1288323623006' | date:"MM/dd/yyyy 'at' h:mma"}} it('should format date', function() { expect(element(by.binding("1288323623006 | date:'medium'")).getText()). toMatch(/Oct 2\d, 2010 \d{1,2}:\d{2}:\d{2} (AM|PM)/); expect(element(by.binding("1288323623006 | date:'yyyy-MM-dd HH:mm:ss Z'")).getText()). toMatch(/2010\-10\-2\d \d{2}:\d{2}:\d{2} (\-|\+)?\d{4}/); expect(element(by.binding("'1288323623006' | date:'MM/dd/yyyy @ h:mma'")).getText()). toMatch(/10\/2\d\/2010 @ \d{1,2}:\d{2}(AM|PM)/); expect(element(by.binding("'1288323623006' | date:\"MM/dd/yyyy 'at' h:mma\"")).getText()). toMatch(/10\/2\d\/2010 at \d{1,2}:\d{2}(AM|PM)/); }); */ dateFilter.$inject = ['$locale']; function dateFilter($locale) { var R_ISO8601_STR = /^(\d{4})-?(\d\d)-?(\d\d)(?:T(\d\d)(?::?(\d\d)(?::?(\d\d)(?:\.(\d+))?)?)?(Z|([+-])(\d\d):?(\d\d))?)?$/; // 1 2 3 4 5 6 7 8 9 10 11 function jsonStringToDate(string) { var match; if (match = string.match(R_ISO8601_STR)) { var date = new Date(0), tzHour = 0, tzMin = 0, dateSetter = match[8] ? date.setUTCFullYear : date.setFullYear, timeSetter = match[8] ? date.setUTCHours : date.setHours; if (match[9]) { tzHour = toInt(match[9] + match[10]); tzMin = toInt(match[9] + match[11]); } dateSetter.call(date, toInt(match[1]), toInt(match[2]) - 1, toInt(match[3])); var h = toInt(match[4] || 0) - tzHour; var m = toInt(match[5] || 0) - tzMin; var s = toInt(match[6] || 0); var ms = Math.round(parseFloat('0.' + (match[7] || 0)) * 1000); timeSetter.call(date, h, m, s, ms); return date; } return string; } return function(date, format, timezone) { var text = '', parts = [], fn, match; format = format || 'mediumDate'; format = $locale.DATETIME_FORMATS[format] || format; if (isString(date)) { date = NUMBER_STRING.test(date) ? toInt(date) : jsonStringToDate(date); } if (isNumber(date)) { date = new Date(date); } if (!isDate(date) || !isFinite(date.getTime())) { return date; } while (format) { match = DATE_FORMATS_SPLIT.exec(format); if (match) { parts = concat(parts, match, 1); format = parts.pop(); } else { parts.push(format); format = null; } } var dateTimezoneOffset = date.getTimezoneOffset(); if (timezone) { dateTimezoneOffset = timezoneToOffset(timezone, dateTimezoneOffset); date = convertTimezoneToLocal(date, timezone, true); } forEach(parts, function(value) { fn = DATE_FORMATS[value]; text += fn ? fn(date, $locale.DATETIME_FORMATS, dateTimezoneOffset) : value === "''" ? "'" : value.replace(/(^'|'$)/g, '').replace(/''/g, "'"); }); return text; }; } /** * @ngdoc filter * @name json * @kind function * * @description * Allows you to convert a JavaScript object into JSON string. * * This filter is mostly useful for debugging. When using the double curly {{value}} notation * the binding is automatically converted to JSON. * * @param {*} object Any JavaScript object (including arrays and primitive types) to filter. * @param {number=} spacing The number of spaces to use per indentation, defaults to 2. * @returns {string} JSON string. * * * @example {{ {'name':'value'} | json }} {{ {'name':'value'} | json:4 }} it('should jsonify filtered objects', function() { expect(element(by.id('default-spacing')).getText()).toMatch(/\{\n "name": ?"value"\n}/); expect(element(by.id('custom-spacing')).getText()).toMatch(/\{\n "name": ?"value"\n}/); }); * */ function jsonFilter() { return function(object, spacing) { if (isUndefined(spacing)) { spacing = 2; } return toJson(object, spacing); }; } /** * @ngdoc filter * @name lowercase * @kind function * @description * Converts string to lowercase. * @see angular.lowercase */ var lowercaseFilter = valueFn(lowercase); /** * @ngdoc filter * @name uppercase * @kind function * @description * Converts string to uppercase. * @see angular.uppercase */ var uppercaseFilter = valueFn(uppercase); /** * @ngdoc filter * @name limitTo * @kind function * * @description * Creates a new array or string containing only a specified number of elements. The elements * are taken from either the beginning or the end of the source array, string or number, as specified by * the value and sign (positive or negative) of `limit`. If a number is used as input, it is * converted to a string. * * @param {Array|string|number} input Source array, string or number to be limited. * @param {string|number} limit The length of the returned array or string. If the `limit` number * is positive, `limit` number of items from the beginning of the source array/string are copied. * If the number is negative, `limit` number of items from the end of the source array/string * are copied. The `limit` will be trimmed if it exceeds `array.length`. If `limit` is undefined, * the input will be returned unchanged. * @param {(string|number)=} begin Index at which to begin limitation. As a negative index, `begin` * indicates an offset from the end of `input`. Defaults to `0`. * @returns {Array|string} A new sub-array or substring of length `limit` or less if input array * had less than `limit` elements. * * @example Limit {{numbers}} to: Output numbers: {{ numbers | limitTo:numLimit }} Limit {{letters}} to: Output letters: {{ letters | limitTo:letterLimit }} Limit {{longNumber}} to: Output long number: {{ longNumber | limitTo:longNumberLimit }} var numLimitInput = element(by.model('numLimit')); var letterLimitInput = element(by.model('letterLimit')); var longNumberLimitInput = element(by.model('longNumberLimit')); var limitedNumbers = element(by.binding('numbers | limitTo:numLimit')); var limitedLetters = element(by.binding('letters | limitTo:letterLimit')); var limitedLongNumber = element(by.binding('longNumber | limitTo:longNumberLimit')); it('should limit the number array to first three items', function() { expect(numLimitInput.getAttribute('value')).toBe('3'); expect(letterLimitInput.getAttribute('value')).toBe('3'); expect(longNumberLimitInput.getAttribute('value')).toBe('3'); expect(limitedNumbers.getText()).toEqual('Output numbers: [1,2,3]'); expect(limitedLetters.getText()).toEqual('Output letters: abc'); expect(limitedLongNumber.getText()).toEqual('Output long number: 234'); }); // There is a bug in safari and protractor that doesn't like the minus key // it('should update the output when -3 is entered', function() { // numLimitInput.clear(); // numLimitInput.sendKeys('-3'); // letterLimitInput.clear(); // letterLimitInput.sendKeys('-3'); // longNumberLimitInput.clear(); // longNumberLimitInput.sendKeys('-3'); // expect(limitedNumbers.getText()).toEqual('Output numbers: [7,8,9]'); // expect(limitedLetters.getText()).toEqual('Output letters: ghi'); // expect(limitedLongNumber.getText()).toEqual('Output long number: 342'); // }); it('should not exceed the maximum size of input array', function() { numLimitInput.clear(); numLimitInput.sendKeys('100'); letterLimitInput.clear(); letterLimitInput.sendKeys('100'); longNumberLimitInput.clear(); longNumberLimitInput.sendKeys('100'); expect(limitedNumbers.getText()).toEqual('Output numbers: [1,2,3,4,5,6,7,8,9]'); expect(limitedLetters.getText()).toEqual('Output letters: abcdefghi'); expect(limitedLongNumber.getText()).toEqual('Output long number: 2345432342'); }); */ function limitToFilter() { return function(input, limit, begin) { if (Math.abs(Number(limit)) === Infinity) { limit = Number(limit); } else { limit = toInt(limit); } if (isNaN(limit)) return input; if (isNumber(input)) input = input.toString(); if (!isArray(input) && !isString(input)) return input; begin = (!begin || isNaN(begin)) ? 0 : toInt(begin); begin = (begin < 0) ? Math.max(0, input.length + begin) : begin; if (limit >= 0) { return input.slice(begin, begin + limit); } else { if (begin === 0) { return input.slice(limit, input.length); } else { return input.slice(Math.max(0, begin + limit), begin); } } }; } /** * @ngdoc filter * @name orderBy * @kind function * * @description * Orders a specified `array` by the `expression` predicate. It is ordered alphabetically * for strings and numerically for numbers. Note: if you notice numbers are not being sorted * as expected, make sure they are actually being saved as numbers and not strings. * Array-like values (e.g. NodeLists, jQuery objects, TypedArrays, Strings, etc) are also supported. * * @param {Array} array The array (or array-like object) to sort. * @param {function(*)|string|Array.<(function(*)|string)>=} expression A predicate to be * used by the comparator to determine the order of elements. * * Can be one of: * * - `function`: Getter function. The result of this function will be sorted using the * `<`, `===`, `>` operator. * - `string`: An Angular expression. The result of this expression is used to compare elements * (for example `name` to sort by a property called `name` or `name.substr(0, 3)` to sort by * 3 first characters of a property called `name`). The result of a constant expression * is interpreted as a property name to be used in comparisons (for example `"special name"` * to sort object by the value of their `special name` property). An expression can be * optionally prefixed with `+` or `-` to control ascending or descending sort order * (for example, `+name` or `-name`). If no property is provided, (e.g. `'+'`) then the array * element itself is used to compare where sorting. * - `Array`: An array of function or string predicates. The first predicate in the array * is used for sorting, but when two items are equivalent, the next predicate is used. * * If the predicate is missing or empty then it defaults to `'+'`. * * @param {boolean=} reverse Reverse the order of the array. * @returns {Array} Sorted copy of the source array. * * * @example * The example below demonstrates a simple ngRepeat, where the data is sorted * by age in descending order (predicate is set to `'-age'`). * `reverse` is not set, which means it defaults to `false`. Name Phone Number Age {{friend.name}} {{friend.phone}} {{friend.age}} angular.module('orderByExample', []) .controller('ExampleController', ['$scope', function($scope) { $scope.friends = [{name:'John', phone:'555-1212', age:10}, {name:'Mary', phone:'555-9876', age:19}, {name:'Mike', phone:'555-4321', age:21}, {name:'Adam', phone:'555-5678', age:35}, {name:'Julie', phone:'555-8765', age:29}]; }]); * * The predicate and reverse parameters can be controlled dynamically through scope properties, * as shown in the next example. * @example Sorting predicate = {{predicate}}; reverse = {{reverse}} Set to unsorted Name Phone Number Age {{friend.name}} {{friend.phone}} {{friend.age}} angular.module('orderByExample', []) .controller('ExampleController', ['$scope', function($scope) { $scope.friends = [{name:'John', phone:'555-1212', age:10}, {name:'Mary', phone:'555-9876', age:19}, {name:'Mike', phone:'555-4321', age:21}, {name:'Adam', phone:'555-5678', age:35}, {name:'Julie', phone:'555-8765', age:29}]; $scope.predicate = 'age'; $scope.reverse = true; $scope.order = function(predicate) { $scope.reverse = ($scope.predicate === predicate) ? !$scope.reverse : false; $scope.predicate = predicate; }; }]); .sortorder:after { content: '\25b2'; } .sortorder.reverse:after { content: '\25bc'; } * * It's also possible to call the orderBy filter manually, by injecting `$filter`, retrieving the * filter routine with `$filter('orderBy')`, and calling the returned filter routine with the * desired parameters. * * Example: * * @example Sorting predicate = {{predicate}}; reverse = {{reverse}} Name Phone Number Age {{friend.name}} {{friend.phone}} {{friend.age}} angular.module('orderByExample', []) .controller('ExampleController', ['$scope', '$filter', function($scope, $filter) { var orderBy = $filter('orderBy'); $scope.friends = [ { name: 'John', phone: '555-1212', age: 10 }, { name: 'Mary', phone: '555-9876', age: 19 }, { name: 'Mike', phone: '555-4321', age: 21 }, { name: 'Adam', phone: '555-5678', age: 35 }, { name: 'Julie', phone: '555-8765', age: 29 } ]; $scope.order = function(predicate) { $scope.predicate = predicate; $scope.reverse = ($scope.predicate === predicate) ? !$scope.reverse : false; $scope.friends = orderBy($scope.friends, predicate, $scope.reverse); }; $scope.order('age', true); }]); .sortorder:after { content: '\25b2'; } .sortorder.reverse:after { content: '\25bc'; } */ orderByFilter.$inject = ['$parse']; function orderByFilter($parse) { return function(array, sortPredicate, reverseOrder) { if (array == null) return array; if (!isArrayLike(array)) { throw minErr('orderBy')('notarray', 'Expected array but received: {0}', array); } if (!isArray(sortPredicate)) { sortPredicate = [sortPredicate]; } if (sortPredicate.length === 0) { sortPredicate = ['+']; } var predicates = processPredicates(sortPredicate, reverseOrder); // Add a predicate at the end that evaluates to the element index. This makes the // sort stable as it works as a tie-breaker when all the input predicates cannot // distinguish between two elements. predicates.push({ get: function() { return {}; }, descending: reverseOrder ? -1 : 1}); // The next three lines are a version of a Swartzian Transform idiom from Perl // (sometimes called the Decorate-Sort-Undecorate idiom) // See https://en.wikipedia.org/wiki/Schwartzian_transform var compareValues = Array.prototype.map.call(array, getComparisonObject); compareValues.sort(doComparison); array = compareValues.map(function(item) { return item.value; }); return array; function getComparisonObject(value, index) { return { value: value, predicateValues: predicates.map(function(predicate) { return getPredicateValue(predicate.get(value), index); }) }; } function doComparison(v1, v2) { var result = 0; for (var index=0, length = predicates.length; index < length; ++index) { result = compare(v1.predicateValues[index], v2.predicateValues[index]) * predicates[index].descending; if (result) break; } return result; } }; function processPredicates(sortPredicate, reverseOrder) { reverseOrder = reverseOrder ? -1 : 1; return sortPredicate.map(function(predicate) { var descending = 1, get = identity; if (isFunction(predicate)) { get = predicate; } else if (isString(predicate)) { if ((predicate.charAt(0) == '+' || predicate.charAt(0) == '-')) { descending = predicate.charAt(0) == '-' ? -1 : 1; predicate = predicate.substring(1); } if (predicate !== '') { get = $parse(predicate); if (get.constant) { var key = get(); get = function(value) { return value[key]; }; } } } return { get: get, descending: descending * reverseOrder }; }); } function isPrimitive(value) { switch (typeof value) { case 'number': /* falls through */ case 'boolean': /* falls through */ case 'string': return true; default: return false; } } function objectValue(value, index) { // If `valueOf` is a valid function use that if (typeof value.valueOf === 'function') { value = value.valueOf(); if (isPrimitive(value)) return value; } // If `toString` is a valid function and not the one from `Object.prototype` use that if (hasCustomToString(value)) { value = value.toString(); if (isPrimitive(value)) return value; } // We have a basic object so we use the position of the object in the collection return index; } function getPredicateValue(value, index) { var type = typeof value; if (value === null) { type = 'string'; value = 'null'; } else if (type === 'string') { value = value.toLowerCase(); } else if (type === 'object') { value = objectValue(value, index); } return { value: value, type: type }; } function compare(v1, v2) { var result = 0; if (v1.type === v2.type) { if (v1.value !== v2.value) { result = v1.value < v2.value ? -1 : 1; } } else { result = v1.type < v2.type ? -1 : 1; } return result; } } function ngDirective(directive) { if (isFunction(directive)) { directive = { link: directive }; } directive.restrict = directive.restrict || 'AC'; return valueFn(directive); } /** * @ngdoc directive * @name a * @restrict E * * @description * Modifies the default behavior of the html A tag so that the default action is prevented when * the href attribute is empty. * * This change permits the easy creation of action links with the `ngClick` directive * without changing the location or causing page reloads, e.g.: * `Add Item` */ var htmlAnchorDirective = valueFn({ restrict: 'E', compile: function(element, attr) { if (!attr.href && !attr.xlinkHref) { return function(scope, element) { // If the linked element is not an anchor tag anymore, do nothing if (element[0].nodeName.toLowerCase() !== 'a') return; // SVGAElement does not use the href attribute, but rather the 'xlinkHref' attribute. var href = toString.call(element.prop('href')) === '[object SVGAnimatedString]' ? 'xlink:href' : 'href'; element.on('click', function(event) { // if we have no href url, then don't navigate anywhere. if (!element.attr(href)) { event.preventDefault(); } }); }; } } }); /** * @ngdoc directive * @name ngHref * @restrict A * @priority 99 * * @description * Using Angular markup like `{{hash}}` in an href attribute will * make the link go to the wrong URL if the user clicks it before * Angular has a chance to replace the `{{hash}}` markup with its * value. Until Angular replaces the markup the link will be broken * and will most likely return a 404 error. The `ngHref` directive * solves this problem. * * The wrong way to write it: * ```html * link1 * ``` * * The correct way to write it: * ```html * link1 * ``` * * @element A * @param {template} ngHref any string which can contain `{{}}` markup. * * @example * This example shows various combinations of `href`, `ng-href` and `ng-click` attributes * in links and their different behaviors: link 1 (link, don't reload) link 2 (link, don't reload) link 3 (link, reload!) anchor (link, don't reload) anchor (no link) link (link, change location) it('should execute ng-click but not reload when href without value', function() { element(by.id('link-1')).click(); expect(element(by.model('value')).getAttribute('value')).toEqual('1'); expect(element(by.id('link-1')).getAttribute('href')).toBe(''); }); it('should execute ng-click but not reload when href empty string', function() { element(by.id('link-2')).click(); expect(element(by.model('value')).getAttribute('value')).toEqual('2'); expect(element(by.id('link-2')).getAttribute('href')).toBe(''); }); it('should execute ng-click and change url when ng-href specified', function() { expect(element(by.id('link-3')).getAttribute('href')).toMatch(/\/123$/); element(by.id('link-3')).click(); // At this point, we navigate away from an Angular page, so we need // to use browser.driver to get the base webdriver. browser.wait(function() { return browser.driver.getCurrentUrl().then(function(url) { return url.match(/\/123$/); }); }, 5000, 'page should navigate to /123'); }); it('should execute ng-click but not reload when href empty string and name specified', function() { element(by.id('link-4')).click(); expect(element(by.model('value')).getAttribute('value')).toEqual('4'); expect(element(by.id('link-4')).getAttribute('href')).toBe(''); }); it('should execute ng-click but not reload when no href but name specified', function() { element(by.id('link-5')).click(); expect(element(by.model('value')).getAttribute('value')).toEqual('5'); expect(element(by.id('link-5')).getAttribute('href')).toBe(null); }); it('should only change url when only ng-href', function() { element(by.model('value')).clear(); element(by.model('value')).sendKeys('6'); expect(element(by.id('link-6')).getAttribute('href')).toMatch(/\/6$/); element(by.id('link-6')).click(); // At this point, we navigate away from an Angular page, so we need // to use browser.driver to get the base webdriver. browser.wait(function() { return browser.driver.getCurrentUrl().then(function(url) { return url.match(/\/6$/); }); }, 5000, 'page should navigate to /6'); }); */ /** * @ngdoc directive * @name ngSrc * @restrict A * @priority 99 * * @description * Using Angular markup like `{{hash}}` in a `src` attribute doesn't * work right: The browser will fetch from the URL with the literal * text `{{hash}}` until Angular replaces the expression inside * `{{hash}}`. The `ngSrc` directive solves this problem. * * The buggy way to write it: * ```html * * ``` * * The correct way to write it: * ```html * * ``` * * @element IMG * @param {template} ngSrc any string which can contain `{{}}` markup. */ /** * @ngdoc directive * @name ngSrcset * @restrict A * @priority 99 * * @description * Using Angular markup like `{{hash}}` in a `srcset` attribute doesn't * work right: The browser will fetch from the URL with the literal * text `{{hash}}` until Angular replaces the expression inside * `{{hash}}`. The `ngSrcset` directive solves this problem. * * The buggy way to write it: * ```html * * ``` * * The correct way to write it: * ```html * * ``` * * @element IMG * @param {template} ngSrcset any string which can contain `{{}}` markup. */ /** * @ngdoc directive * @name ngDisabled * @restrict A * @priority 100 * * @description * * This directive sets the `disabled` attribute on the element if the * {@link guide/expression expression} inside `ngDisabled` evaluates to truthy. * * A special directive is necessary because we cannot use interpolation inside the `disabled` * attribute. See the {@link guide/interpolation interpolation guide} for more info. * * @example Click me to toggle: Button it('should toggle button', function() { expect(element(by.css('button')).getAttribute('disabled')).toBeFalsy(); element(by.model('checked')).click(); expect(element(by.css('button')).getAttribute('disabled')).toBeTruthy(); }); * * @element INPUT * @param {expression} ngDisabled If the {@link guide/expression expression} is truthy, * then the `disabled` attribute will be set on the element */ /** * @ngdoc directive * @name ngChecked * @restrict A * @priority 100 * * @description * Sets the `checked` attribute on the element, if the expression inside `ngChecked` is truthy. * * Note that this directive should not be used together with {@link ngModel `ngModel`}, * as this can lead to unexpected behavior. * * A special directive is necessary because we cannot use interpolation inside the `checked` * attribute. See the {@link guide/interpolation interpolation guide} for more info. * * @example Check me to check both: it('should check both checkBoxes', function() { expect(element(by.id('checkSlave')).getAttribute('checked')).toBeFalsy(); element(by.model('master')).click(); expect(element(by.id('checkSlave')).getAttribute('checked')).toBeTruthy(); }); * * @element INPUT * @param {expression} ngChecked If the {@link guide/expression expression} is truthy, * then the `checked` attribute will be set on the element */ /** * @ngdoc directive * @name ngReadonly * @restrict A * @priority 100 * * @description * * Sets the `readOnly` attribute on the element, if the expression inside `ngReadonly` is truthy. * * A special directive is necessary because we cannot use interpolation inside the `readOnly` * attribute. See the {@link guide/interpolation interpolation guide} for more info. * * @example Check me to make text readonly: it('should toggle readonly attr', function() { expect(element(by.css('[type="text"]')).getAttribute('readonly')).toBeFalsy(); element(by.model('checked')).click(); expect(element(by.css('[type="text"]')).getAttribute('readonly')).toBeTruthy(); }); * * @element INPUT * @param {expression} ngReadonly If the {@link guide/expression expression} is truthy, * then special attribute "readonly" will be set on the element */ /** * @ngdoc directive * @name ngSelected * @restrict A * @priority 100 * * @description * * Sets the `selected` attribute on the element, if the expression inside `ngSelected` is truthy. * * A special directive is necessary because we cannot use interpolation inside the `selected` * attribute. See the {@link guide/interpolation interpolation guide} for more info. * * @example Check me to select: Hello! Greetings! it('should select Greetings!', function() { expect(element(by.id('greet')).getAttribute('selected')).toBeFalsy(); element(by.model('selected')).click(); expect(element(by.id('greet')).getAttribute('selected')).toBeTruthy(); }); * * @element OPTION * @param {expression} ngSelected If the {@link guide/expression expression} is truthy, * then special attribute "selected" will be set on the element */ /** * @ngdoc directive * @name ngOpen * @restrict A * @priority 100 * * @description * * Sets the `open` attribute on the element, if the expression inside `ngOpen` is truthy. * * A special directive is necessary because we cannot use interpolation inside the `open` * attribute. See the {@link guide/interpolation interpolation guide} for more info. * * @example Check me check multiple: Show/Hide me it('should toggle open', function() { expect(element(by.id('details')).getAttribute('open')).toBeFalsy(); element(by.model('open')).click(); expect(element(by.id('details')).getAttribute('open')).toBeTruthy(); }); * * @element DETAILS * @param {expression} ngOpen If the {@link guide/expression expression} is truthy, * then special attribute "open" will be set on the element */ var ngAttributeAliasDirectives = {}; // boolean attrs are evaluated forEach(BOOLEAN_ATTR, function(propName, attrName) { // binding to multiple is not supported if (propName == "multiple") return; function defaultLinkFn(scope, element, attr) { scope.$watch(attr[normalized], function ngBooleanAttrWatchAction(value) { attr.$set(attrName, !!value); }); } var normalized = directiveNormalize('ng-' + attrName); var linkFn = defaultLinkFn; if (propName === 'checked') { linkFn = function(scope, element, attr) { // ensuring ngChecked doesn't interfere with ngModel when both are set on the same input if (attr.ngModel !== attr[normalized]) { defaultLinkFn(scope, element, attr); } }; } ngAttributeAliasDirectives[normalized] = function() { return { restrict: 'A', priority: 100, link: linkFn }; }; }); // aliased input attrs are evaluated forEach(ALIASED_ATTR, function(htmlAttr, ngAttr) { ngAttributeAliasDirectives[ngAttr] = function() { return { priority: 100, link: function(scope, element, attr) { //special case ngPattern when a literal regular expression value //is used as the expression (this way we don't have to watch anything). if (ngAttr === "ngPattern" && attr.ngPattern.charAt(0) == "/") { var match = attr.ngPattern.match(REGEX_STRING_REGEXP); if (match) { attr.$set("ngPattern", new RegExp(match[1], match[2])); return; } } scope.$watch(attr[ngAttr], function ngAttrAliasWatchAction(value) { attr.$set(ngAttr, value); }); } }; }; }); // ng-src, ng-srcset, ng-href are interpolated forEach(['src', 'srcset', 'href'], function(attrName) { var normalized = directiveNormalize('ng-' + attrName); ngAttributeAliasDirectives[normalized] = function() { return { priority: 99, // it needs to run after the attributes are interpolated link: function(scope, element, attr) { var propName = attrName, name = attrName; if (attrName === 'href' && toString.call(element.prop('href')) === '[object SVGAnimatedString]') { name = 'xlinkHref'; attr.$attr[name] = 'xlink:href'; propName = null; } attr.$observe(normalized, function(value) { if (!value) { if (attrName === 'href') { attr.$set(name, null); } return; } attr.$set(name, value); // on IE, if "ng:src" directive declaration is used and "src" attribute doesn't exist // then calling element.setAttribute('src', 'foo') doesn't do anything, so we need // to set the property as well to achieve the desired effect. // we use attr[attrName] value since $set can sanitize the url. if (msie && propName) element.prop(propName, attr[name]); }); } }; }; }); /* global -nullFormCtrl, -SUBMITTED_CLASS, addSetValidityMethod: true */ var nullFormCtrl = { $addControl: noop, $$renameControl: nullFormRenameControl, $removeControl: noop, $setValidity: noop, $setDirty: noop, $setPristine: noop, $setSubmitted: noop }, SUBMITTED_CLASS = 'ng-submitted'; function nullFormRenameControl(control, name) { control.$name = name; } /** * @ngdoc type * @name form.FormController * * @property {boolean} $pristine True if user has not interacted with the form yet. * @property {boolean} $dirty True if user has already interacted with the form. * @property {boolean} $valid True if all of the containing forms and controls are valid. * @property {boolean} $invalid True if at least one containing control or form is invalid. * @property {boolean} $pending True if at least one containing control or form is pending. * @property {boolean} $submitted True if user has submitted the form even if its invalid. * * @property {Object} $error Is an object hash, containing references to controls or * forms with failing validators, where: * * - keys are validation tokens (error names), * - values are arrays of controls or forms that have a failing validator for given error name. * * Built-in validation tokens: * * - `email` * - `max` * - `maxlength` * - `min` * - `minlength` * - `number` * - `pattern` * - `required` * - `url` * - `date` * - `datetimelocal` * - `time` * - `week` * - `month` * * @description * `FormController` keeps track of all its controls and nested forms as well as the state of them, * such as being valid/invalid or dirty/pristine. * * Each {@link ng.directive:form form} directive creates an instance * of `FormController`. * */ //asks for $scope to fool the BC controller module FormController.$inject = ['$element', '$attrs', '$scope', '$animate', '$interpolate']; function FormController(element, attrs, $scope, $animate, $interpolate) { var form = this, controls = []; // init state form.$error = {}; form.$$success = {}; form.$pending = undefined; form.$name = $interpolate(attrs.name || attrs.ngForm || '')($scope); form.$dirty = false; form.$pristine = true; form.$valid = true; form.$invalid = false; form.$submitted = false; form.$$parentForm = nullFormCtrl; /** * @ngdoc method * @name form.FormController#$rollbackViewValue * * @description * Rollback all form controls pending updates to the `$modelValue`. * * Updates may be pending by a debounced event or because the input is waiting for a some future * event defined in `ng-model-options`. This method is typically needed by the reset button of * a form that uses `ng-model-options` to pend updates. */ form.$rollbackViewValue = function() { forEach(controls, function(control) { control.$rollbackViewValue(); }); }; /** * @ngdoc method * @name form.FormController#$commitViewValue * * @description * Commit all form controls pending updates to the `$modelValue`. * * Updates may be pending by a debounced event or because the input is waiting for a some future * event defined in `ng-model-options`. This method is rarely needed as `NgModelController` * usually handles calling this in response to input events. */ form.$commitViewValue = function() { forEach(controls, function(control) { control.$commitViewValue(); }); }; /** * @ngdoc method * @name form.FormController#$addControl * @param {object} control control object, either a {@link form.FormController} or an * {@link ngModel.NgModelController} * * @description * Register a control with the form. Input elements using ngModelController do this automatically * when they are linked. * * Note that the current state of the control will not be reflected on the new parent form. This * is not an issue with normal use, as freshly compiled and linked controls are in a `$pristine` * state. * * However, if the method is used programmatically, for example by adding dynamically created controls, * or controls that have been previously removed without destroying their corresponding DOM element, * it's the developers responsibility to make sure the current state propagates to the parent form. * * For example, if an input control is added that is already `$dirty` and has `$error` properties, * calling `$setDirty()` and `$validate()` afterwards will propagate the state to the parent form. */ form.$addControl = function(control) { // Breaking change - before, inputs whose name was "hasOwnProperty" were quietly ignored // and not added to the scope. Now we throw an error. assertNotHasOwnProperty(control.$name, 'input'); controls.push(control); if (control.$name) { form[control.$name] = control; } control.$$parentForm = form; }; // Private API: rename a form control form.$$renameControl = function(control, newName) { var oldName = control.$name; if (form[oldName] === control) { delete form[oldName]; } form[newName] = control; control.$name = newName; }; /** * @ngdoc method * @name form.FormController#$removeControl * @param {object} control control object, either a {@link form.FormController} or an * {@link ngModel.NgModelController} * * @description * Deregister a control from the form. * * Input elements using ngModelController do this automatically when they are destroyed. * * Note that only the removed control's validation state (`$errors`etc.) will be removed from the * form. `$dirty`, `$submitted` states will not be changed, because the expected behavior can be * different from case to case. For example, removing the only `$dirty` control from a form may or * may not mean that the form is still `$dirty`. */ form.$removeControl = function(control) { if (control.$name && form[control.$name] === control) { delete form[control.$name]; } forEach(form.$pending, function(value, name) { form.$setValidity(name, null, control); }); forEach(form.$error, function(value, name) { form.$setValidity(name, null, control); }); forEach(form.$$success, function(value, name) { form.$setValidity(name, null, control); }); arrayRemove(controls, control); control.$$parentForm = nullFormCtrl; }; /** * @ngdoc method * @name form.FormController#$setValidity * * @description * Sets the validity of a form control. * * This method will also propagate to parent forms. */ addSetValidityMethod({ ctrl: this, $element: element, set: function(object, property, controller) { var list = object[property]; if (!list) { object[property] = [controller]; } else { var index = list.indexOf(controller); if (index === -1) { list.push(controller); } } }, unset: function(object, property, controller) { var list = object[property]; if (!list) { return; } arrayRemove(list, controller); if (list.length === 0) { delete object[property]; } }, $animate: $animate }); /** * @ngdoc method * @name form.FormController#$setDirty * * @description * Sets the form to a dirty state. * * This method can be called to add the 'ng-dirty' class and set the form to a dirty * state (ng-dirty class). This method will also propagate to parent forms. */ form.$setDirty = function() { $animate.removeClass(element, PRISTINE_CLASS); $animate.addClass(element, DIRTY_CLASS); form.$dirty = true; form.$pristine = false; form.$$parentForm.$setDirty(); }; /** * @ngdoc method * @name form.FormController#$setPristine * * @description * Sets the form to its pristine state. * * This method can be called to remove the 'ng-dirty' class and set the form to its pristine * state (ng-pristine class). This method will also propagate to all the controls contained * in this form. * * Setting a form back to a pristine state is often useful when we want to 'reuse' a form after * saving or resetting it. */ form.$setPristine = function() { $animate.setClass(element, PRISTINE_CLASS, DIRTY_CLASS + ' ' + SUBMITTED_CLASS); form.$dirty = false; form.$pristine = true; form.$submitted = false; forEach(controls, function(control) { control.$setPristine(); }); }; /** * @ngdoc method * @name form.FormController#$setUntouched * * @description * Sets the form to its untouched state. * * This method can be called to remove the 'ng-touched' class and set the form controls to their * untouched state (ng-untouched class). * * Setting a form controls back to their untouched state is often useful when setting the form * back to its pristine state. */ form.$setUntouched = function() { forEach(controls, function(control) { control.$setUntouched(); }); }; /** * @ngdoc method * @name form.FormController#$setSubmitted * * @description * Sets the form to its submitted state. */ form.$setSubmitted = function() { $animate.addClass(element, SUBMITTED_CLASS); form.$submitted = true; form.$$parentForm.$setSubmitted(); }; } /** * @ngdoc directive * @name ngForm * @restrict EAC * * @description * Nestable alias of {@link ng.directive:form `form`} directive. HTML * does not allow nesting of form elements. It is useful to nest forms, for example if the validity of a * sub-group of controls needs to be determined. * * Note: the purpose of `ngForm` is to group controls, * but not to be a replacement for the `` tag with all of its capabilities * (e.g. posting to the server, ...). * * @param {string=} ngForm|name Name of the form. If specified, the form controller will be published into * related scope, under this name. * */ /** * @ngdoc directive * @name form * @restrict E * * @description * Directive that instantiates * {@link form.FormController FormController}. * * If the `name` attribute is specified, the form controller is published onto the current scope under * this name. * * # Alias: {@link ng.directive:ngForm `ngForm`} * * In Angular, forms can be nested. This means that the outer form is valid when all of the child * forms are valid as well. However, browsers do not allow nesting of `` elements, so * Angular provides the {@link ng.directive:ngForm `ngForm`} directive, which behaves identically to * `form` but can be nested. Nested forms can be useful, for example, if the validity of a sub-group * of controls needs to be determined. * * # CSS classes * - `ng-valid` is set if the form is valid. * - `ng-invalid` is set if the form is invalid. * - `ng-pending` is set if the form is pending. * - `ng-pristine` is set if the form is pristine. * - `ng-dirty` is set if the form is dirty. * - `ng-submitted` is set if the form was submitted. * * Keep in mind that ngAnimate can detect each of these classes when added and removed. * * * # Submitting a form and preventing the default action * * Since the role of forms in client-side Angular applications is different than in classical * roundtrip apps, it is desirable for the browser not to translate the form submission into a full * page reload that sends the data to the server. Instead some javascript logic should be triggered * to handle the form submission in an application-specific way. * * For this reason, Angular prevents the default action (form submission to the server) unless the * `` element has an `action` attribute specified. * * You can use one of the following two ways to specify what javascript method should be called when * a form is submitted: * * - {@link ng.directive:ngSubmit ngSubmit} directive on the form element * - {@link ng.directive:ngClick ngClick} directive on the first * button or input field of type submit (input[type=submit]) * * To prevent double execution of the handler, use only one of the {@link ng.directive:ngSubmit ngSubmit} * or {@link ng.directive:ngClick ngClick} directives. * This is because of the following form submission rules in the HTML specification: * * - If a form has only one input field then hitting enter in this field triggers form submit * (`ngSubmit`) * - if a form has 2+ input fields and no buttons or input[type=submit] then hitting enter * doesn't trigger submit * - if a form has one or more input fields and one or more buttons or input[type=submit] then * hitting enter in any of the input fields will trigger the click handler on the *first* button or * input[type=submit] (`ngClick`) *and* a submit handler on the enclosing form (`ngSubmit`) * * Any pending `ngModelOptions` changes will take place immediately when an enclosing form is * submitted. Note that `ngClick` events will occur before the model is updated. Use `ngSubmit` * to have access to the updated model. * * ## Animation Hooks * * Animations in ngForm are triggered when any of the associated CSS classes are added and removed. * These classes are: `.ng-pristine`, `.ng-dirty`, `.ng-invalid` and `.ng-valid` as well as any * other validations that are performed within the form. Animations in ngForm are similar to how * they work in ngClass and animations can be hooked into using CSS transitions, keyframes as well * as JS animations. * * The following example shows a simple way to utilize CSS transitions to style a form element * that has been rendered as invalid after it has been validated: * * * //be sure to include ngAnimate as a module to hook into more * //advanced animations * .my-form { * transition:0.5s linear all; * background: white; * } * .my-form.ng-invalid { * background: red; * color:white; * } * * * @example userType: Required! userType = {{userType}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} it('should initialize to model', function() { var userType = element(by.binding('userType')); var valid = element(by.binding('myForm.input.$valid')); expect(userType.getText()).toContain('guest'); expect(valid.getText()).toContain('true'); }); it('should be invalid if empty', function() { var userType = element(by.binding('userType')); var valid = element(by.binding('myForm.input.$valid')); var userInput = element(by.model('userType')); userInput.clear(); userInput.sendKeys(''); expect(userType.getText()).toEqual('userType ='); expect(valid.getText()).toContain('false'); }); * * @param {string=} name Name of the form. If specified, the form controller will be published into * related scope, under this name. */ var formDirectiveFactory = function(isNgForm) { return ['$timeout', '$parse', function($timeout, $parse) { var formDirective = { name: 'form', restrict: isNgForm ? 'EAC' : 'E', require: ['form', '^^?form'], //first is the form's own ctrl, second is an optional parent form controller: FormController, compile: function ngFormCompile(formElement, attr) { // Setup initial state of the control formElement.addClass(PRISTINE_CLASS).addClass(VALID_CLASS); var nameAttr = attr.name ? 'name' : (isNgForm && attr.ngForm ? 'ngForm' : false); return { pre: function ngFormPreLink(scope, formElement, attr, ctrls) { var controller = ctrls[0]; // if `action` attr is not present on the form, prevent the default action (submission) if (!('action' in attr)) { // we can't use jq events because if a form is destroyed during submission the default // action is not prevented. see #1238 // // IE 9 is not affected because it doesn't fire a submit event and try to do a full // page reload if the form was destroyed by submission of the form via a click handler // on a button in the form. Looks like an IE9 specific bug. var handleFormSubmission = function(event) { scope.$apply(function() { controller.$commitViewValue(); controller.$setSubmitted(); }); event.preventDefault(); }; addEventListenerFn(formElement[0], 'submit', handleFormSubmission); // unregister the preventDefault listener so that we don't not leak memory but in a // way that will achieve the prevention of the default action. formElement.on('$destroy', function() { $timeout(function() { removeEventListenerFn(formElement[0], 'submit', handleFormSubmission); }, 0, false); }); } var parentFormCtrl = ctrls[1] || controller.$$parentForm; parentFormCtrl.$addControl(controller); var setter = nameAttr ? getSetter(controller.$name) : noop; if (nameAttr) { setter(scope, controller); attr.$observe(nameAttr, function(newValue) { if (controller.$name === newValue) return; setter(scope, undefined); controller.$$parentForm.$$renameControl(controller, newValue); setter = getSetter(controller.$name); setter(scope, controller); }); } formElement.on('$destroy', function() { controller.$$parentForm.$removeControl(controller); setter(scope, undefined); extend(controller, nullFormCtrl); //stop propagating child destruction handlers upwards }); } }; } }; return formDirective; function getSetter(expression) { if (expression === '') { //create an assignable expression, so forms with an empty name can be renamed later return $parse('this[""]').assign; } return $parse(expression).assign || noop; } }]; }; var formDirective = formDirectiveFactory(); var ngFormDirective = formDirectiveFactory(true); /* global VALID_CLASS: false, INVALID_CLASS: false, PRISTINE_CLASS: false, DIRTY_CLASS: false, UNTOUCHED_CLASS: false, TOUCHED_CLASS: false, ngModelMinErr: false, */ // Regex code was initially obtained from SO prior to modification: https://stackoverflow.com/questions/3143070/javascript-regex-iso-datetime#answer-3143231 var ISO_DATE_REGEXP = /^\d{4,}-[01]\d-[0-3]\dT[0-2]\d:[0-5]\d:[0-5]\d\.\d+(?:[+-][0-2]\d:[0-5]\d|Z)$/; // See valid URLs in RFC3987 (http://tools.ietf.org/html/rfc3987) // Note: We are being more lenient, because browsers are too. // 1. Scheme // 2. Slashes // 3. Username // 4. Password // 5. Hostname // 6. Port // 7. Path // 8. Query // 9. Fragment // 1111111111111111 222 333333 44444 555555555555555555555555 666 77777777 8888888 999 var URL_REGEXP = /^[a-z][a-z\d.+-]*:\/*(?:[^:@]+(?::[^@]+)?@)?(?:[^\s:/?#]+|\[[a-f\d:]+\])(?::\d+)?(?:\/[^?#]*)?(?:\?[^#]*)?(?:#.*)?$/i; var EMAIL_REGEXP = /^[a-z0-9!#$%&'*+\/=?^_`{|}~.-]+@[a-z0-9]([a-z0-9-]*[a-z0-9])?(\.[a-z0-9]([a-z0-9-]*[a-z0-9])?)*$/i; var NUMBER_REGEXP = /^\s*(\-|\+)?(\d+|(\d*(\.\d*)))([eE][+-]?\d+)?\s*$/; var DATE_REGEXP = /^(\d{4,})-(\d{2})-(\d{2})$/; var DATETIMELOCAL_REGEXP = /^(\d{4,})-(\d\d)-(\d\d)T(\d\d):(\d\d)(?::(\d\d)(\.\d{1,3})?)?$/; var WEEK_REGEXP = /^(\d{4,})-W(\d\d)$/; var MONTH_REGEXP = /^(\d{4,})-(\d\d)$/; var TIME_REGEXP = /^(\d\d):(\d\d)(?::(\d\d)(\.\d{1,3})?)?$/; var PARTIAL_VALIDATION_EVENTS = 'keydown wheel mousedown'; var PARTIAL_VALIDATION_TYPES = createMap(); forEach('date,datetime-local,month,time,week'.split(','), function(type) { PARTIAL_VALIDATION_TYPES[type] = true; }); var inputType = { /** * @ngdoc input * @name input[text] * * @description * Standard HTML text input with angular data binding, inherited by most of the `input` elements. * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required Adds `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of * any length. * @param {string=} pattern Similar to `ngPattern` except that the attribute value is the actual string * that contains the regular expression body that will be converted to a regular expression * as in the ngPattern directive. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * @param {boolean=} [ngTrim=true] If set to false Angular will not automatically trim the input. * This parameter is ignored for input[type=password] controls, which will never trim the * input. * * @example Single word: Required! Single word only! text = {{example.text}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var text = element(by.binding('example.text')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.text')); it('should initialize to model', function() { expect(text.getText()).toContain('guest'); expect(valid.getText()).toContain('true'); }); it('should be invalid if empty', function() { input.clear(); input.sendKeys(''); expect(text.getText()).toEqual('text ='); expect(valid.getText()).toContain('false'); }); it('should be invalid if multi word', function() { input.clear(); input.sendKeys('hello world'); expect(valid.getText()).toContain('false'); }); */ 'text': textInputType, /** * @ngdoc input * @name input[date] * * @description * Input with date validation and transformation. In browsers that do not yet support * the HTML5 date input, a text element will be used. In that case, text must be entered in a valid ISO-8601 * date format (yyyy-MM-dd), for example: `2009-01-06`. Since many * modern browsers do not yet support this input type, it is important to provide cues to users on the * expected input format via a placeholder or label. * * The model must always be a Date object, otherwise Angular will throw an error. * Invalid `Date` objects (dates whose `getTime()` is `NaN`) will be rendered as an empty string. * * The timezone to be used to read/write the `Date` instance in the model can be defined using * {@link ng.directive:ngModelOptions ngModelOptions}. By default, this is the timezone of the browser. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. This must be a * valid ISO date string (yyyy-MM-dd). You can also use interpolation inside this attribute * (e.g. `min="{{minDate | date:'yyyy-MM-dd'}}"`). Note that `min` will also add native HTML5 * constraint validation. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. This must be * a valid ISO date string (yyyy-MM-dd). You can also use interpolation inside this attribute * (e.g. `max="{{maxDate | date:'yyyy-MM-dd'}}"`). Note that `max` will also add native HTML5 * constraint validation. * @param {(date|string)=} ngMin Sets the `min` validation constraint to the Date / ISO date string * the `ngMin` expression evaluates to. Note that it does not set the `min` attribute. * @param {(date|string)=} ngMax Sets the `max` validation constraint to the Date / ISO date string * the `ngMax` expression evaluates to. Note that it does not set the `max` attribute. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Pick a date in 2013: Required! Not a valid date! value = {{example.value | date: "yyyy-MM-dd"}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value | date: "yyyy-MM-dd"')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); // currently protractor/webdriver does not support // sending keys to all known HTML5 input controls // for various browsers (see https://github.com/angular/protractor/issues/562). function setInput(val) { // set the value of the element and force validation. var scr = "var ipt = document.getElementById('exampleInput'); " + "ipt.value = '" + val + "';" + "angular.element(ipt).scope().$apply(function(s) { s.myForm[ipt.name].$setViewValue('" + val + "'); });"; browser.executeScript(scr); } it('should initialize to model', function() { expect(value.getText()).toContain('2013-10-22'); expect(valid.getText()).toContain('myForm.input.$valid = true'); }); it('should be invalid if empty', function() { setInput(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); it('should be invalid if over max', function() { setInput('2015-01-01'); expect(value.getText()).toContain(''); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); */ 'date': createDateInputType('date', DATE_REGEXP, createDateParser(DATE_REGEXP, ['yyyy', 'MM', 'dd']), 'yyyy-MM-dd'), /** * @ngdoc input * @name input[datetime-local] * * @description * Input with datetime validation and transformation. In browsers that do not yet support * the HTML5 date input, a text element will be used. In that case, the text must be entered in a valid ISO-8601 * local datetime format (yyyy-MM-ddTHH:mm:ss), for example: `2010-12-28T14:57:00`. * * The model must always be a Date object, otherwise Angular will throw an error. * Invalid `Date` objects (dates whose `getTime()` is `NaN`) will be rendered as an empty string. * * The timezone to be used to read/write the `Date` instance in the model can be defined using * {@link ng.directive:ngModelOptions ngModelOptions}. By default, this is the timezone of the browser. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. * This must be a valid ISO datetime format (yyyy-MM-ddTHH:mm:ss). You can also use interpolation * inside this attribute (e.g. `min="{{minDatetimeLocal | date:'yyyy-MM-ddTHH:mm:ss'}}"`). * Note that `min` will also add native HTML5 constraint validation. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. * This must be a valid ISO datetime format (yyyy-MM-ddTHH:mm:ss). You can also use interpolation * inside this attribute (e.g. `max="{{maxDatetimeLocal | date:'yyyy-MM-ddTHH:mm:ss'}}"`). * Note that `max` will also add native HTML5 constraint validation. * @param {(date|string)=} ngMin Sets the `min` validation error key to the Date / ISO datetime string * the `ngMin` expression evaluates to. Note that it does not set the `min` attribute. * @param {(date|string)=} ngMax Sets the `max` validation error key to the Date / ISO datetime string * the `ngMax` expression evaluates to. Note that it does not set the `max` attribute. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Pick a date between in 2013: Required! Not a valid date! value = {{example.value | date: "yyyy-MM-ddTHH:mm:ss"}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value | date: "yyyy-MM-ddTHH:mm:ss"')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); // currently protractor/webdriver does not support // sending keys to all known HTML5 input controls // for various browsers (https://github.com/angular/protractor/issues/562). function setInput(val) { // set the value of the element and force validation. var scr = "var ipt = document.getElementById('exampleInput'); " + "ipt.value = '" + val + "';" + "angular.element(ipt).scope().$apply(function(s) { s.myForm[ipt.name].$setViewValue('" + val + "'); });"; browser.executeScript(scr); } it('should initialize to model', function() { expect(value.getText()).toContain('2010-12-28T14:57:00'); expect(valid.getText()).toContain('myForm.input.$valid = true'); }); it('should be invalid if empty', function() { setInput(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); it('should be invalid if over max', function() { setInput('2015-01-01T23:59:00'); expect(value.getText()).toContain(''); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); */ 'datetime-local': createDateInputType('datetimelocal', DATETIMELOCAL_REGEXP, createDateParser(DATETIMELOCAL_REGEXP, ['yyyy', 'MM', 'dd', 'HH', 'mm', 'ss', 'sss']), 'yyyy-MM-ddTHH:mm:ss.sss'), /** * @ngdoc input * @name input[time] * * @description * Input with time validation and transformation. In browsers that do not yet support * the HTML5 time input, a text element will be used. In that case, the text must be entered in a valid ISO-8601 * local time format (HH:mm:ss), for example: `14:57:00`. Model must be a Date object. This binding will always output a * Date object to the model of January 1, 1970, or local date `new Date(1970, 0, 1, HH, mm, ss)`. * * The model must always be a Date object, otherwise Angular will throw an error. * Invalid `Date` objects (dates whose `getTime()` is `NaN`) will be rendered as an empty string. * * The timezone to be used to read/write the `Date` instance in the model can be defined using * {@link ng.directive:ngModelOptions ngModelOptions}. By default, this is the timezone of the browser. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. * This must be a valid ISO time format (HH:mm:ss). You can also use interpolation inside this * attribute (e.g. `min="{{minTime | date:'HH:mm:ss'}}"`). Note that `min` will also add * native HTML5 constraint validation. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. * This must be a valid ISO time format (HH:mm:ss). You can also use interpolation inside this * attribute (e.g. `max="{{maxTime | date:'HH:mm:ss'}}"`). Note that `max` will also add * native HTML5 constraint validation. * @param {(date|string)=} ngMin Sets the `min` validation constraint to the Date / ISO time string the * `ngMin` expression evaluates to. Note that it does not set the `min` attribute. * @param {(date|string)=} ngMax Sets the `max` validation constraint to the Date / ISO time string the * `ngMax` expression evaluates to. Note that it does not set the `max` attribute. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Pick a time between 8am and 5pm: Required! Not a valid date! value = {{example.value | date: "HH:mm:ss"}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value | date: "HH:mm:ss"')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); // currently protractor/webdriver does not support // sending keys to all known HTML5 input controls // for various browsers (https://github.com/angular/protractor/issues/562). function setInput(val) { // set the value of the element and force validation. var scr = "var ipt = document.getElementById('exampleInput'); " + "ipt.value = '" + val + "';" + "angular.element(ipt).scope().$apply(function(s) { s.myForm[ipt.name].$setViewValue('" + val + "'); });"; browser.executeScript(scr); } it('should initialize to model', function() { expect(value.getText()).toContain('14:57:00'); expect(valid.getText()).toContain('myForm.input.$valid = true'); }); it('should be invalid if empty', function() { setInput(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); it('should be invalid if over max', function() { setInput('23:59:00'); expect(value.getText()).toContain(''); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); */ 'time': createDateInputType('time', TIME_REGEXP, createDateParser(TIME_REGEXP, ['HH', 'mm', 'ss', 'sss']), 'HH:mm:ss.sss'), /** * @ngdoc input * @name input[week] * * @description * Input with week-of-the-year validation and transformation to Date. In browsers that do not yet support * the HTML5 week input, a text element will be used. In that case, the text must be entered in a valid ISO-8601 * week format (yyyy-W##), for example: `2013-W02`. * * The model must always be a Date object, otherwise Angular will throw an error. * Invalid `Date` objects (dates whose `getTime()` is `NaN`) will be rendered as an empty string. * * The timezone to be used to read/write the `Date` instance in the model can be defined using * {@link ng.directive:ngModelOptions ngModelOptions}. By default, this is the timezone of the browser. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. * This must be a valid ISO week format (yyyy-W##). You can also use interpolation inside this * attribute (e.g. `min="{{minWeek | date:'yyyy-Www'}}"`). Note that `min` will also add * native HTML5 constraint validation. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. * This must be a valid ISO week format (yyyy-W##). You can also use interpolation inside this * attribute (e.g. `max="{{maxWeek | date:'yyyy-Www'}}"`). Note that `max` will also add * native HTML5 constraint validation. * @param {(date|string)=} ngMin Sets the `min` validation constraint to the Date / ISO week string * the `ngMin` expression evaluates to. Note that it does not set the `min` attribute. * @param {(date|string)=} ngMax Sets the `max` validation constraint to the Date / ISO week string * the `ngMax` expression evaluates to. Note that it does not set the `max` attribute. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Pick a date between in 2013: Required! Not a valid date! value = {{example.value | date: "yyyy-Www"}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value | date: "yyyy-Www"')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); // currently protractor/webdriver does not support // sending keys to all known HTML5 input controls // for various browsers (https://github.com/angular/protractor/issues/562). function setInput(val) { // set the value of the element and force validation. var scr = "var ipt = document.getElementById('exampleInput'); " + "ipt.value = '" + val + "';" + "angular.element(ipt).scope().$apply(function(s) { s.myForm[ipt.name].$setViewValue('" + val + "'); });"; browser.executeScript(scr); } it('should initialize to model', function() { expect(value.getText()).toContain('2013-W01'); expect(valid.getText()).toContain('myForm.input.$valid = true'); }); it('should be invalid if empty', function() { setInput(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); it('should be invalid if over max', function() { setInput('2015-W01'); expect(value.getText()).toContain(''); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); */ 'week': createDateInputType('week', WEEK_REGEXP, weekParser, 'yyyy-Www'), /** * @ngdoc input * @name input[month] * * @description * Input with month validation and transformation. In browsers that do not yet support * the HTML5 month input, a text element will be used. In that case, the text must be entered in a valid ISO-8601 * month format (yyyy-MM), for example: `2009-01`. * * The model must always be a Date object, otherwise Angular will throw an error. * Invalid `Date` objects (dates whose `getTime()` is `NaN`) will be rendered as an empty string. * If the model is not set to the first of the month, the next view to model update will set it * to the first of the month. * * The timezone to be used to read/write the `Date` instance in the model can be defined using * {@link ng.directive:ngModelOptions ngModelOptions}. By default, this is the timezone of the browser. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. * This must be a valid ISO month format (yyyy-MM). You can also use interpolation inside this * attribute (e.g. `min="{{minMonth | date:'yyyy-MM'}}"`). Note that `min` will also add * native HTML5 constraint validation. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. * This must be a valid ISO month format (yyyy-MM). You can also use interpolation inside this * attribute (e.g. `max="{{maxMonth | date:'yyyy-MM'}}"`). Note that `max` will also add * native HTML5 constraint validation. * @param {(date|string)=} ngMin Sets the `min` validation constraint to the Date / ISO week string * the `ngMin` expression evaluates to. Note that it does not set the `min` attribute. * @param {(date|string)=} ngMax Sets the `max` validation constraint to the Date / ISO week string * the `ngMax` expression evaluates to. Note that it does not set the `max` attribute. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Pick a month in 2013: Required! Not a valid month! value = {{example.value | date: "yyyy-MM"}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value | date: "yyyy-MM"')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); // currently protractor/webdriver does not support // sending keys to all known HTML5 input controls // for various browsers (https://github.com/angular/protractor/issues/562). function setInput(val) { // set the value of the element and force validation. var scr = "var ipt = document.getElementById('exampleInput'); " + "ipt.value = '" + val + "';" + "angular.element(ipt).scope().$apply(function(s) { s.myForm[ipt.name].$setViewValue('" + val + "'); });"; browser.executeScript(scr); } it('should initialize to model', function() { expect(value.getText()).toContain('2013-10'); expect(valid.getText()).toContain('myForm.input.$valid = true'); }); it('should be invalid if empty', function() { setInput(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); it('should be invalid if over max', function() { setInput('2015-01'); expect(value.getText()).toContain(''); expect(valid.getText()).toContain('myForm.input.$valid = false'); }); */ 'month': createDateInputType('month', MONTH_REGEXP, createDateParser(MONTH_REGEXP, ['yyyy', 'MM']), 'yyyy-MM'), /** * @ngdoc input * @name input[number] * * @description * Text input with number validation and transformation. Sets the `number` validation * error if not a valid number. * * * The model must always be of type `number` otherwise Angular will throw an error. * Be aware that a string containing a number is not enough. See the {@link ngModel:numfmt} * error docs for more information and an example of how to convert your model if necessary. * * * ## Issues with HTML5 constraint validation * * In browsers that follow the * [HTML5 specification](https://html.spec.whatwg.org/multipage/forms.html#number-state-%28type=number%29), * `input[number]` does not work as expected with {@link ngModelOptions `ngModelOptions.allowInvalid`}. * If a non-number is entered in the input, the browser will report the value as an empty string, * which means the view / model values in `ngModel` and subsequently the scope value * will also be an empty string. * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} min Sets the `min` validation error key if the value entered is less than `min`. * @param {string=} max Sets the `max` validation error key if the value entered is greater than `max`. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of * any length. * @param {string=} pattern Similar to `ngPattern` except that the attribute value is the actual string * that contains the regular expression body that will be converted to a regular expression * as in the ngPattern directive. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Number: Required! Not valid number! value = {{example.value}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} var value = element(by.binding('example.value')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('example.value')); it('should initialize to model', function() { expect(value.getText()).toContain('12'); expect(valid.getText()).toContain('true'); }); it('should be invalid if empty', function() { input.clear(); input.sendKeys(''); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('false'); }); it('should be invalid if over max', function() { input.clear(); input.sendKeys('123'); expect(value.getText()).toEqual('value ='); expect(valid.getText()).toContain('false'); }); */ 'number': numberInputType, /** * @ngdoc input * @name input[url] * * @description * Text input with URL validation. Sets the `url` validation error key if the content is not a * valid URL. * * * **Note:** `input[url]` uses a regex to validate urls that is derived from the regex * used in Chromium. If you need stricter validation, you can use `ng-pattern` or modify * the built-in validators (see the {@link guide/forms Forms guide}) * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of * any length. * @param {string=} pattern Similar to `ngPattern` except that the attribute value is the actual string * that contains the regular expression body that will be converted to a regular expression * as in the ngPattern directive. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example URL: Required! Not valid url! text = {{url.text}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} myForm.$error.url = {{!!myForm.$error.url}} var text = element(by.binding('url.text')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('url.text')); it('should initialize to model', function() { expect(text.getText()).toContain('http://google.com'); expect(valid.getText()).toContain('true'); }); it('should be invalid if empty', function() { input.clear(); input.sendKeys(''); expect(text.getText()).toEqual('text ='); expect(valid.getText()).toContain('false'); }); it('should be invalid if not url', function() { input.clear(); input.sendKeys('box'); expect(valid.getText()).toContain('false'); }); */ 'url': urlInputType, /** * @ngdoc input * @name input[email] * * @description * Text input with email validation. Sets the `email` validation error key if not a valid email * address. * * * **Note:** `input[email]` uses a regex to validate email addresses that is derived from the regex * used in Chromium. If you need stricter validation (e.g. requiring a top-level domain), you can * use `ng-pattern` or modify the built-in validators (see the {@link guide/forms Forms guide}) * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of * any length. * @param {string=} pattern Similar to `ngPattern` except that the attribute value is the actual string * that contains the regular expression body that will be converted to a regular expression * as in the ngPattern directive. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Email: Required! Not valid email! text = {{email.text}} myForm.input.$valid = {{myForm.input.$valid}} myForm.input.$error = {{myForm.input.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} myForm.$error.email = {{!!myForm.$error.email}} var text = element(by.binding('email.text')); var valid = element(by.binding('myForm.input.$valid')); var input = element(by.model('email.text')); it('should initialize to model', function() { expect(text.getText()).toContain('me@example.com'); expect(valid.getText()).toContain('true'); }); it('should be invalid if empty', function() { input.clear(); input.sendKeys(''); expect(text.getText()).toEqual('text ='); expect(valid.getText()).toContain('false'); }); it('should be invalid if not email', function() { input.clear(); input.sendKeys('xxx'); expect(valid.getText()).toContain('false'); }); */ 'email': emailInputType, /** * @ngdoc input * @name input[radio] * * @description * HTML radio button. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string} value The value to which the `ngModel` expression should be set when selected. * Note that `value` only supports `string` values, i.e. the scope model needs to be a string, * too. Use `ngValue` if you need complex models (`number`, `object`, ...). * @param {string=} name Property name of the form under which the control is published. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * @param {string} ngValue Angular expression to which `ngModel` will be be set when the radio * is selected. Should be used instead of the `value` attribute if you need * a non-string `ngModel` (`boolean`, `array`, ...). * * @example Red Green Blue color = {{color.name | json}} Note that `ng-value="specialValue"` sets radio item's value to be the value of `$scope.specialValue`. it('should change state', function() { var color = element(by.binding('color.name')); expect(color.getText()).toContain('blue'); element.all(by.model('color.name')).get(0).click(); expect(color.getText()).toContain('red'); }); */ 'radio': radioInputType, /** * @ngdoc input * @name input[checkbox] * * @description * HTML checkbox. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {expression=} ngTrueValue The value to which the expression should be set when selected. * @param {expression=} ngFalseValue The value to which the expression should be set when not selected. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * * @example Value1: Value2: value1 = {{checkboxModel.value1}} value2 = {{checkboxModel.value2}} it('should change state', function() { var value1 = element(by.binding('checkboxModel.value1')); var value2 = element(by.binding('checkboxModel.value2')); expect(value1.getText()).toContain('true'); expect(value2.getText()).toContain('YES'); element(by.model('checkboxModel.value1')).click(); element(by.model('checkboxModel.value2')).click(); expect(value1.getText()).toContain('false'); expect(value2.getText()).toContain('NO'); }); */ 'checkbox': checkboxInputType, 'hidden': noop, 'button': noop, 'submit': noop, 'reset': noop, 'file': noop }; function stringBasedInputType(ctrl) { ctrl.$formatters.push(function(value) { return ctrl.$isEmpty(value) ? value : value.toString(); }); } function textInputType(scope, element, attr, ctrl, $sniffer, $browser) { baseInputType(scope, element, attr, ctrl, $sniffer, $browser); stringBasedInputType(ctrl); } function baseInputType(scope, element, attr, ctrl, $sniffer, $browser) { var type = lowercase(element[0].type); // In composition mode, users are still inputing intermediate text buffer, // hold the listener until composition is done. // More about composition events: https://developer.mozilla.org/en-US/docs/Web/API/CompositionEvent if (!$sniffer.android) { var composing = false; element.on('compositionstart', function() { composing = true; }); element.on('compositionend', function() { composing = false; listener(); }); } var timeout; var listener = function(ev) { if (timeout) { $browser.defer.cancel(timeout); timeout = null; } if (composing) return; var value = element.val(), event = ev && ev.type; // By default we will trim the value // If the attribute ng-trim exists we will avoid trimming // If input type is 'password', the value is never trimmed if (type !== 'password' && (!attr.ngTrim || attr.ngTrim !== 'false')) { value = trim(value); } // If a control is suffering from bad input (due to native validators), browsers discard its // value, so it may be necessary to revalidate (by calling $setViewValue again) even if the // control's value is the same empty value twice in a row. if (ctrl.$viewValue !== value || (value === '' && ctrl.$$hasNativeValidators)) { ctrl.$setViewValue(value, event); } }; // if the browser does support "input" event, we are fine - except on IE9 which doesn't fire the // input event on backspace, delete or cut if ($sniffer.hasEvent('input')) { element.on('input', listener); } else { var deferListener = function(ev, input, origValue) { if (!timeout) { timeout = $browser.defer(function() { timeout = null; if (!input || input.value !== origValue) { listener(ev); } }); } }; element.on('keydown', function(event) { var key = event.keyCode; // ignore // command modifiers arrows if (key === 91 || (15 < key && key < 19) || (37 <= key && key <= 40)) return; deferListener(event, this, this.value); }); // if user modifies input value using context menu in IE, we need "paste" and "cut" events to catch it if ($sniffer.hasEvent('paste')) { element.on('paste cut', deferListener); } } // if user paste into input using mouse on older browser // or form autocomplete on newer browser, we need "change" event to catch it element.on('change', listener); // Some native input types (date-family) have the ability to change validity without // firing any input/change events. // For these event types, when native validators are present and the browser supports the type, // check for validity changes on various DOM events. if (PARTIAL_VALIDATION_TYPES[type] && ctrl.$$hasNativeValidators && type === attr.type) { element.on(PARTIAL_VALIDATION_EVENTS, function(ev) { if (!timeout) { var validity = this[VALIDITY_STATE_PROPERTY]; var origBadInput = validity.badInput; var origTypeMismatch = validity.typeMismatch; timeout = $browser.defer(function() { timeout = null; if (validity.badInput !== origBadInput || validity.typeMismatch !== origTypeMismatch) { listener(ev); } }); } }); } ctrl.$render = function() { // Workaround for Firefox validation #12102. var value = ctrl.$isEmpty(ctrl.$viewValue) ? '' : ctrl.$viewValue; if (element.val() !== value) { element.val(value); } }; } function weekParser(isoWeek, existingDate) { if (isDate(isoWeek)) { return isoWeek; } if (isString(isoWeek)) { WEEK_REGEXP.lastIndex = 0; var parts = WEEK_REGEXP.exec(isoWeek); if (parts) { var year = +parts[1], week = +parts[2], hours = 0, minutes = 0, seconds = 0, milliseconds = 0, firstThurs = getFirstThursdayOfYear(year), addDays = (week - 1) * 7; if (existingDate) { hours = existingDate.getHours(); minutes = existingDate.getMinutes(); seconds = existingDate.getSeconds(); milliseconds = existingDate.getMilliseconds(); } return new Date(year, 0, firstThurs.getDate() + addDays, hours, minutes, seconds, milliseconds); } } return NaN; } function createDateParser(regexp, mapping) { return function(iso, date) { var parts, map; if (isDate(iso)) { return iso; } if (isString(iso)) { // When a date is JSON'ified to wraps itself inside of an extra // set of double quotes. This makes the date parsing code unable // to match the date string and parse it as a date. if (iso.charAt(0) == '"' && iso.charAt(iso.length - 1) == '"') { iso = iso.substring(1, iso.length - 1); } if (ISO_DATE_REGEXP.test(iso)) { return new Date(iso); } regexp.lastIndex = 0; parts = regexp.exec(iso); if (parts) { parts.shift(); if (date) { map = { yyyy: date.getFullYear(), MM: date.getMonth() + 1, dd: date.getDate(), HH: date.getHours(), mm: date.getMinutes(), ss: date.getSeconds(), sss: date.getMilliseconds() / 1000 }; } else { map = { yyyy: 1970, MM: 1, dd: 1, HH: 0, mm: 0, ss: 0, sss: 0 }; } forEach(parts, function(part, index) { if (index < mapping.length) { map[mapping[index]] = +part; } }); return new Date(map.yyyy, map.MM - 1, map.dd, map.HH, map.mm, map.ss || 0, map.sss * 1000 || 0); } } return NaN; }; } function createDateInputType(type, regexp, parseDate, format) { return function dynamicDateInputType(scope, element, attr, ctrl, $sniffer, $browser, $filter) { badInputChecker(scope, element, attr, ctrl); baseInputType(scope, element, attr, ctrl, $sniffer, $browser); var timezone = ctrl && ctrl.$options && ctrl.$options.timezone; var previousDate; ctrl.$$parserName = type; ctrl.$parsers.push(function(value) { if (ctrl.$isEmpty(value)) return null; if (regexp.test(value)) { // Note: We cannot read ctrl.$modelValue, as there might be a different // parser/formatter in the processing chain so that the model // contains some different data format! var parsedDate = parseDate(value, previousDate); if (timezone) { parsedDate = convertTimezoneToLocal(parsedDate, timezone); } return parsedDate; } return undefined; }); ctrl.$formatters.push(function(value) { if (value && !isDate(value)) { throw ngModelMinErr('datefmt', 'Expected `{0}` to be a date', value); } if (isValidDate(value)) { previousDate = value; if (previousDate && timezone) { previousDate = convertTimezoneToLocal(previousDate, timezone, true); } return $filter('date')(value, format, timezone); } else { previousDate = null; return ''; } }); if (isDefined(attr.min) || attr.ngMin) { var minVal; ctrl.$validators.min = function(value) { return !isValidDate(value) || isUndefined(minVal) || parseDate(value) >= minVal; }; attr.$observe('min', function(val) { minVal = parseObservedDateValue(val); ctrl.$validate(); }); } if (isDefined(attr.max) || attr.ngMax) { var maxVal; ctrl.$validators.max = function(value) { return !isValidDate(value) || isUndefined(maxVal) || parseDate(value) <= maxVal; }; attr.$observe('max', function(val) { maxVal = parseObservedDateValue(val); ctrl.$validate(); }); } function isValidDate(value) { // Invalid Date: getTime() returns NaN return value && !(value.getTime && value.getTime() !== value.getTime()); } function parseObservedDateValue(val) { return isDefined(val) && !isDate(val) ? parseDate(val) || undefined : val; } }; } function badInputChecker(scope, element, attr, ctrl) { var node = element[0]; var nativeValidation = ctrl.$$hasNativeValidators = isObject(node.validity); if (nativeValidation) { ctrl.$parsers.push(function(value) { var validity = element.prop(VALIDITY_STATE_PROPERTY) || {}; return validity.badInput || validity.typeMismatch ? undefined : value; }); } } function numberInputType(scope, element, attr, ctrl, $sniffer, $browser) { badInputChecker(scope, element, attr, ctrl); baseInputType(scope, element, attr, ctrl, $sniffer, $browser); ctrl.$$parserName = 'number'; ctrl.$parsers.push(function(value) { if (ctrl.$isEmpty(value)) return null; if (NUMBER_REGEXP.test(value)) return parseFloat(value); return undefined; }); ctrl.$formatters.push(function(value) { if (!ctrl.$isEmpty(value)) { if (!isNumber(value)) { throw ngModelMinErr('numfmt', 'Expected `{0}` to be a number', value); } value = value.toString(); } return value; }); if (isDefined(attr.min) || attr.ngMin) { var minVal; ctrl.$validators.min = function(value) { return ctrl.$isEmpty(value) || isUndefined(minVal) || value >= minVal; }; attr.$observe('min', function(val) { if (isDefined(val) && !isNumber(val)) { val = parseFloat(val, 10); } minVal = isNumber(val) && !isNaN(val) ? val : undefined; // TODO(matsko): implement validateLater to reduce number of validations ctrl.$validate(); }); } if (isDefined(attr.max) || attr.ngMax) { var maxVal; ctrl.$validators.max = function(value) { return ctrl.$isEmpty(value) || isUndefined(maxVal) || value <= maxVal; }; attr.$observe('max', function(val) { if (isDefined(val) && !isNumber(val)) { val = parseFloat(val, 10); } maxVal = isNumber(val) && !isNaN(val) ? val : undefined; // TODO(matsko): implement validateLater to reduce number of validations ctrl.$validate(); }); } } function urlInputType(scope, element, attr, ctrl, $sniffer, $browser) { // Note: no badInputChecker here by purpose as `url` is only a validation // in browsers, i.e. we can always read out input.value even if it is not valid! baseInputType(scope, element, attr, ctrl, $sniffer, $browser); stringBasedInputType(ctrl); ctrl.$$parserName = 'url'; ctrl.$validators.url = function(modelValue, viewValue) { var value = modelValue || viewValue; return ctrl.$isEmpty(value) || URL_REGEXP.test(value); }; } function emailInputType(scope, element, attr, ctrl, $sniffer, $browser) { // Note: no badInputChecker here by purpose as `url` is only a validation // in browsers, i.e. we can always read out input.value even if it is not valid! baseInputType(scope, element, attr, ctrl, $sniffer, $browser); stringBasedInputType(ctrl); ctrl.$$parserName = 'email'; ctrl.$validators.email = function(modelValue, viewValue) { var value = modelValue || viewValue; return ctrl.$isEmpty(value) || EMAIL_REGEXP.test(value); }; } function radioInputType(scope, element, attr, ctrl) { // make the name unique, if not defined if (isUndefined(attr.name)) { element.attr('name', nextUid()); } var listener = function(ev) { if (element[0].checked) { ctrl.$setViewValue(attr.value, ev && ev.type); } }; element.on('click', listener); ctrl.$render = function() { var value = attr.value; element[0].checked = (value == ctrl.$viewValue); }; attr.$observe('value', ctrl.$render); } function parseConstantExpr($parse, context, name, expression, fallback) { var parseFn; if (isDefined(expression)) { parseFn = $parse(expression); if (!parseFn.constant) { throw ngModelMinErr('constexpr', 'Expected constant expression for `{0}`, but saw ' + '`{1}`.', name, expression); } return parseFn(context); } return fallback; } function checkboxInputType(scope, element, attr, ctrl, $sniffer, $browser, $filter, $parse) { var trueValue = parseConstantExpr($parse, scope, 'ngTrueValue', attr.ngTrueValue, true); var falseValue = parseConstantExpr($parse, scope, 'ngFalseValue', attr.ngFalseValue, false); var listener = function(ev) { ctrl.$setViewValue(element[0].checked, ev && ev.type); }; element.on('click', listener); ctrl.$render = function() { element[0].checked = ctrl.$viewValue; }; // Override the standard `$isEmpty` because the $viewValue of an empty checkbox is always set to `false` // This is because of the parser below, which compares the `$modelValue` with `trueValue` to convert // it to a boolean. ctrl.$isEmpty = function(value) { return value === false; }; ctrl.$formatters.push(function(value) { return equals(value, trueValue); }); ctrl.$parsers.push(function(value) { return value ? trueValue : falseValue; }); } /** * @ngdoc directive * @name textarea * @restrict E * * @description * HTML textarea element control with angular data-binding. The data-binding and validation * properties of this element are exactly the same as those of the * {@link ng.directive:input input element}. * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of any * length. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * @param {boolean=} [ngTrim=true] If set to false Angular will not automatically trim the input. */ /** * @ngdoc directive * @name input * @restrict E * * @description * HTML input element control. When used together with {@link ngModel `ngModel`}, it provides data-binding, * input state control, and validation. * Input control follows HTML5 input types and polyfills the HTML5 validation behavior for older browsers. * * * **Note:** Not every feature offered is available for all input types. * Specifically, data binding and event handling via `ng-model` is unsupported for `input[file]`. * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {boolean=} ngRequired Sets `required` attribute if set to true * @param {number=} ngMinlength Sets `minlength` validation error key if the value is shorter than * minlength. * @param {number=} ngMaxlength Sets `maxlength` validation error key if the value is longer than * maxlength. Setting the attribute to a negative or non-numeric value, allows view values of any * length. * @param {string=} ngPattern Sets `pattern` validation error key if the ngModel {@link ngModel.NgModelController#$viewValue $viewValue} * value does not match a RegExp found by evaluating the Angular expression given in the attribute value. * If the expression evaluates to a RegExp object, then this is used directly. * If the expression evaluates to a string, then it will be converted to a RegExp * after wrapping it in `^` and `$` characters. For instance, `"abc"` will be converted to * `new RegExp('^abc$')`. * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * @param {string=} ngChange Angular expression to be executed when input changes due to user * interaction with the input element. * @param {boolean=} [ngTrim=true] If set to false Angular will not automatically trim the input. * This parameter is ignored for input[type=password] controls, which will never trim the * input. * * @example User name: Required! Last name: Too short! Too long! user = {{user}} myForm.userName.$valid = {{myForm.userName.$valid}} myForm.userName.$error = {{myForm.userName.$error}} myForm.lastName.$valid = {{myForm.lastName.$valid}} myForm.lastName.$error = {{myForm.lastName.$error}} myForm.$valid = {{myForm.$valid}} myForm.$error.required = {{!!myForm.$error.required}} myForm.$error.minlength = {{!!myForm.$error.minlength}} myForm.$error.maxlength = {{!!myForm.$error.maxlength}} var user = element(by.exactBinding('user')); var userNameValid = element(by.binding('myForm.userName.$valid')); var lastNameValid = element(by.binding('myForm.lastName.$valid')); var lastNameError = element(by.binding('myForm.lastName.$error')); var formValid = element(by.binding('myForm.$valid')); var userNameInput = element(by.model('user.name')); var userLastInput = element(by.model('user.last')); it('should initialize to model', function() { expect(user.getText()).toContain('{"name":"guest","last":"visitor"}'); expect(userNameValid.getText()).toContain('true'); expect(formValid.getText()).toContain('true'); }); it('should be invalid if empty when required', function() { userNameInput.clear(); userNameInput.sendKeys(''); expect(user.getText()).toContain('{"last":"visitor"}'); expect(userNameValid.getText()).toContain('false'); expect(formValid.getText()).toContain('false'); }); it('should be valid if empty when min length is set', function() { userLastInput.clear(); userLastInput.sendKeys(''); expect(user.getText()).toContain('{"name":"guest","last":""}'); expect(lastNameValid.getText()).toContain('true'); expect(formValid.getText()).toContain('true'); }); it('should be invalid if less than required min length', function() { userLastInput.clear(); userLastInput.sendKeys('xx'); expect(user.getText()).toContain('{"name":"guest"}'); expect(lastNameValid.getText()).toContain('false'); expect(lastNameError.getText()).toContain('minlength'); expect(formValid.getText()).toContain('false'); }); it('should be invalid if longer than max length', function() { userLastInput.clear(); userLastInput.sendKeys('some ridiculously long name'); expect(user.getText()).toContain('{"name":"guest"}'); expect(lastNameValid.getText()).toContain('false'); expect(lastNameError.getText()).toContain('maxlength'); expect(formValid.getText()).toContain('false'); }); */ var inputDirective = ['$browser', '$sniffer', '$filter', '$parse', function($browser, $sniffer, $filter, $parse) { return { restrict: 'E', require: ['?ngModel'], link: { pre: function(scope, element, attr, ctrls) { if (ctrls[0]) { (inputType[lowercase(attr.type)] || inputType.text)(scope, element, attr, ctrls[0], $sniffer, $browser, $filter, $parse); } } } }; }]; var CONSTANT_VALUE_REGEXP = /^(true|false|\d+)$/; /** * @ngdoc directive * @name ngValue * * @description * Binds the given expression to the value of `` or {@link input[radio] `input[radio]`}, * so that when the element is selected, the {@link ngModel `ngModel`} of that element is set to * the bound value. * * `ngValue` is useful when dynamically generating lists of radio buttons using * {@link ngRepeat `ngRepeat`}, as shown below. * * Likewise, `ngValue` can be used to generate `` elements for * the {@link select `select`} element. In that case however, only strings are supported * for the `value `attribute, so the resulting `ngModel` will always be a string. * Support for `select` models with non-string values is available via `ngOptions`. * * @element input * @param {string=} ngValue angular expression, whose value will be bound to the `value` attribute * of the `input` element * * @example Which is your favorite? {{name}} You chose {{my.favorite}} var favorite = element(by.binding('my.favorite')); it('should initialize to model', function() { expect(favorite.getText()).toContain('unicorns'); }); it('should bind the values to the inputs', function() { element.all(by.model('my.favorite')).get(0).click(); expect(favorite.getText()).toContain('pizza'); }); */ var ngValueDirective = function() { return { restrict: 'A', priority: 100, compile: function(tpl, tplAttr) { if (CONSTANT_VALUE_REGEXP.test(tplAttr.ngValue)) { return function ngValueConstantLink(scope, elm, attr) { attr.$set('value', scope.$eval(attr.ngValue)); }; } else { return function ngValueLink(scope, elm, attr) { scope.$watch(attr.ngValue, function valueWatchAction(value) { attr.$set('value', value); }); }; } } }; }; /** * @ngdoc directive * @name ngBind * @restrict AC * * @description * The `ngBind` attribute tells Angular to replace the text content of the specified HTML element * with the value of a given expression, and to update the text content when the value of that * expression changes. * * Typically, you don't use `ngBind` directly, but instead you use the double curly markup like * `{{ expression }}` which is similar but less verbose. * * It is preferable to use `ngBind` instead of `{{ expression }}` if a template is momentarily * displayed by the browser in its raw state before Angular compiles it. Since `ngBind` is an * element attribute, it makes the bindings invisible to the user while the page is loading. * * An alternative solution to this problem would be using the * {@link ng.directive:ngCloak ngCloak} directive. * * * @element ANY * @param {expression} ngBind {@link guide/expression Expression} to evaluate. * * @example * Enter a name in the Live Preview text box; the greeting below the text box changes instantly. Enter name: Hello ! it('should check ng-bind', function() { var nameInput = element(by.model('name')); expect(element(by.binding('name')).getText()).toBe('Whirled'); nameInput.clear(); nameInput.sendKeys('world'); expect(element(by.binding('name')).getText()).toBe('world'); }); */ var ngBindDirective = ['$compile', function($compile) { return { restrict: 'AC', compile: function ngBindCompile(templateElement) { $compile.$$addBindingClass(templateElement); return function ngBindLink(scope, element, attr) { $compile.$$addBindingInfo(element, attr.ngBind); element = element[0]; scope.$watch(attr.ngBind, function ngBindWatchAction(value) { element.textContent = isUndefined(value) ? '' : value; }); }; } }; }]; /** * @ngdoc directive * @name ngBindTemplate * * @description * The `ngBindTemplate` directive specifies that the element * text content should be replaced with the interpolation of the template * in the `ngBindTemplate` attribute. * Unlike `ngBind`, the `ngBindTemplate` can contain multiple `{{` `}}` * expressions. This directive is needed since some HTML elements * (such as TITLE and OPTION) cannot contain SPAN elements. * * @element ANY * @param {string} ngBindTemplate template of form * {{ expression }} to eval. * * @example * Try it here: enter text in text box and watch the greeting change. Salutation: Name: it('should check ng-bind', function() { var salutationElem = element(by.binding('salutation')); var salutationInput = element(by.model('salutation')); var nameInput = element(by.model('name')); expect(salutationElem.getText()).toBe('Hello World!'); salutationInput.clear(); salutationInput.sendKeys('Greetings'); nameInput.clear(); nameInput.sendKeys('user'); expect(salutationElem.getText()).toBe('Greetings user!'); }); */ var ngBindTemplateDirective = ['$interpolate', '$compile', function($interpolate, $compile) { return { compile: function ngBindTemplateCompile(templateElement) { $compile.$$addBindingClass(templateElement); return function ngBindTemplateLink(scope, element, attr) { var interpolateFn = $interpolate(element.attr(attr.$attr.ngBindTemplate)); $compile.$$addBindingInfo(element, interpolateFn.expressions); element = element[0]; attr.$observe('ngBindTemplate', function(value) { element.textContent = isUndefined(value) ? '' : value; }); }; } }; }]; /** * @ngdoc directive * @name ngBindHtml * * @description * Evaluates the expression and inserts the resulting HTML into the element in a secure way. By default, * the resulting HTML content will be sanitized using the {@link ngSanitize.$sanitize $sanitize} service. * To utilize this functionality, ensure that `$sanitize` is available, for example, by including {@link * ngSanitize} in your module's dependencies (not in core Angular). In order to use {@link ngSanitize} * in your module's dependencies, you need to include "angular-sanitize.js" in your application. * * You may also bypass sanitization for values you know are safe. To do so, bind to * an explicitly trusted value via {@link ng.$sce#trustAsHtml $sce.trustAsHtml}. See the example * under {@link ng.$sce#show-me-an-example-using-sce- Strict Contextual Escaping (SCE)}. * * Note: If a `$sanitize` service is unavailable and the bound value isn't explicitly trusted, you * will have an exception (instead of an exploit.) * * @element ANY * @param {expression} ngBindHtml {@link guide/expression Expression} to evaluate. * * @example angular.module('bindHtmlExample', ['ngSanitize']) .controller('ExampleController', ['$scope', function($scope) { $scope.myHTML = 'I am an HTMLstring with ' + 'links! and other stuff'; }]); it('should check ng-bind-html', function() { expect(element(by.binding('myHTML')).getText()).toBe( 'I am an HTMLstring with links! and other stuff'); }); */ var ngBindHtmlDirective = ['$sce', '$parse', '$compile', function($sce, $parse, $compile) { return { restrict: 'A', compile: function ngBindHtmlCompile(tElement, tAttrs) { var ngBindHtmlGetter = $parse(tAttrs.ngBindHtml); var ngBindHtmlWatch = $parse(tAttrs.ngBindHtml, function getStringValue(value) { return (value || '').toString(); }); $compile.$$addBindingClass(tElement); return function ngBindHtmlLink(scope, element, attr) { $compile.$$addBindingInfo(element, attr.ngBindHtml); scope.$watch(ngBindHtmlWatch, function ngBindHtmlWatchAction() { // we re-evaluate the expr because we want a TrustedValueHolderType // for $sce, not a string element.html($sce.getTrustedHtml(ngBindHtmlGetter(scope)) || ''); }); }; } }; }]; /** * @ngdoc directive * @name ngChange * * @description * Evaluate the given expression when the user changes the input. * The expression is evaluated immediately, unlike the JavaScript onchange event * which only triggers at the end of a change (usually, when the user leaves the * form element or presses the return key). * * The `ngChange` expression is only evaluated when a change in the input value causes * a new value to be committed to the model. * * It will not be evaluated: * * if the value returned from the `$parsers` transformation pipeline has not changed * * if the input has continued to be invalid since the model will stay `null` * * if the model is changed programmatically and not by a change to the input value * * * Note, this directive requires `ngModel` to be present. * * @element input * @param {expression} ngChange {@link guide/expression Expression} to evaluate upon change * in input value. * * @example * * * * * * * Confirmed * debug = {{confirmed}} * counter = {{counter}} * * * * var counter = element(by.binding('counter')); * var debug = element(by.binding('confirmed')); * * it('should evaluate the expression if changing from view', function() { * expect(counter.getText()).toContain('0'); * * element(by.id('ng-change-example1')).click(); * * expect(counter.getText()).toContain('1'); * expect(debug.getText()).toContain('true'); * }); * * it('should not evaluate the expression if changing from model', function() { * element(by.id('ng-change-example2')).click(); * expect(counter.getText()).toContain('0'); * expect(debug.getText()).toContain('true'); * }); * * */ var ngChangeDirective = valueFn({ restrict: 'A', require: 'ngModel', link: function(scope, element, attr, ctrl) { ctrl.$viewChangeListeners.push(function() { scope.$eval(attr.ngChange); }); } }); function classDirective(name, selector) { name = 'ngClass' + name; return ['$animate', function($animate) { return { restrict: 'AC', link: function(scope, element, attr) { var oldVal; scope.$watch(attr[name], ngClassWatchAction, true); attr.$observe('class', function(value) { ngClassWatchAction(scope.$eval(attr[name])); }); if (name !== 'ngClass') { scope.$watch('$index', function($index, old$index) { // jshint bitwise: false var mod = $index & 1; if (mod !== (old$index & 1)) { var classes = arrayClasses(scope.$eval(attr[name])); mod === selector ? addClasses(classes) : removeClasses(classes); } }); } function addClasses(classes) { var newClasses = digestClassCounts(classes, 1); attr.$addClass(newClasses); } function removeClasses(classes) { var newClasses = digestClassCounts(classes, -1); attr.$removeClass(newClasses); } function digestClassCounts(classes, count) { // Use createMap() to prevent class assumptions involving property // names in Object.prototype var classCounts = element.data('$classCounts') || createMap(); var classesToUpdate = []; forEach(classes, function(className) { if (count > 0 || classCounts[className]) { classCounts[className] = (classCounts[className] || 0) + count; if (classCounts[className] === +(count > 0)) { classesToUpdate.push(className); } } }); element.data('$classCounts', classCounts); return classesToUpdate.join(' '); } function updateClasses(oldClasses, newClasses) { var toAdd = arrayDifference(newClasses, oldClasses); var toRemove = arrayDifference(oldClasses, newClasses); toAdd = digestClassCounts(toAdd, 1); toRemove = digestClassCounts(toRemove, -1); if (toAdd && toAdd.length) { $animate.addClass(element, toAdd); } if (toRemove && toRemove.length) { $animate.removeClass(element, toRemove); } } function ngClassWatchAction(newVal) { if (selector === true || scope.$index % 2 === selector) { var newClasses = arrayClasses(newVal || []); if (!oldVal) { addClasses(newClasses); } else if (!equals(newVal,oldVal)) { var oldClasses = arrayClasses(oldVal); updateClasses(oldClasses, newClasses); } } if (isArray(newVal)) { oldVal = newVal.map(function(v) { return shallowCopy(v); }); } else { oldVal = shallowCopy(newVal); } } } }; function arrayDifference(tokens1, tokens2) { var values = []; outer: for (var i = 0; i < tokens1.length; i++) { var token = tokens1[i]; for (var j = 0; j < tokens2.length; j++) { if (token == tokens2[j]) continue outer; } values.push(token); } return values; } function arrayClasses(classVal) { var classes = []; if (isArray(classVal)) { forEach(classVal, function(v) { classes = classes.concat(arrayClasses(v)); }); return classes; } else if (isString(classVal)) { return classVal.split(' '); } else if (isObject(classVal)) { forEach(classVal, function(v, k) { if (v) { classes = classes.concat(k.split(' ')); } }); return classes; } return classVal; } }]; } /** * @ngdoc directive * @name ngClass * @restrict AC * * @description * The `ngClass` directive allows you to dynamically set CSS classes on an HTML element by databinding * an expression that represents all classes to be added. * * The directive operates in three different ways, depending on which of three types the expression * evaluates to: * * 1. If the expression evaluates to a string, the string should be one or more space-delimited class * names. * * 2. If the expression evaluates to an object, then for each key-value pair of the * object with a truthy value the corresponding key is used as a class name. * * 3. If the expression evaluates to an array, each element of the array should either be a string as in * type 1 or an object as in type 2. This means that you can mix strings and objects together in an array * to give you more control over what CSS classes appear. See the code below for an example of this. * * * The directive won't add duplicate classes if a particular class was already set. * * When the expression changes, the previously added classes are removed and only then are the * new classes added. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link ng.$animate#addClass addClass} | just before the class is applied to the element | * | {@link ng.$animate#removeClass removeClass} | just before the class is removed from the element | * * @element ANY * @param {expression} ngClass {@link guide/expression Expression} to eval. The result * of the evaluation can be a string representing space delimited class * names, an array, or a map of class names to boolean values. In the case of a map, the * names of the properties whose values are truthy will be added as css classes to the * element. * * @example Example that demonstrates basic bindings via ngClass directive. Map Syntax Example deleted (apply "strike" class) important (apply "bold" class) error (apply "has-error" class) Using String Syntax Using Array Syntax Using Array and Map Syntax warning (apply "orange" class) .strike { text-decoration: line-through; } .bold { font-weight: bold; } .red { color: red; } .has-error { color: red; background-color: yellow; } .orange { color: orange; } var ps = element.all(by.css('p')); it('should let you toggle the class', function() { expect(ps.first().getAttribute('class')).not.toMatch(/bold/); expect(ps.first().getAttribute('class')).not.toMatch(/has-error/); element(by.model('important')).click(); expect(ps.first().getAttribute('class')).toMatch(/bold/); element(by.model('error')).click(); expect(ps.first().getAttribute('class')).toMatch(/has-error/); }); it('should let you toggle string example', function() { expect(ps.get(1).getAttribute('class')).toBe(''); element(by.model('style')).clear(); element(by.model('style')).sendKeys('red'); expect(ps.get(1).getAttribute('class')).toBe('red'); }); it('array example should have 3 classes', function() { expect(ps.get(2).getAttribute('class')).toBe(''); element(by.model('style1')).sendKeys('bold'); element(by.model('style2')).sendKeys('strike'); element(by.model('style3')).sendKeys('red'); expect(ps.get(2).getAttribute('class')).toBe('bold strike red'); }); it('array with map example should have 2 classes', function() { expect(ps.last().getAttribute('class')).toBe(''); element(by.model('style4')).sendKeys('bold'); element(by.model('warning')).click(); expect(ps.last().getAttribute('class')).toBe('bold orange'); }); ## Animations The example below demonstrates how to perform animations using ngClass. Sample Text .base-class { transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s; } .base-class.my-class { color: red; font-size:3em; } it('should check ng-class', function() { expect(element(by.css('.base-class')).getAttribute('class')).not. toMatch(/my-class/); element(by.id('setbtn')).click(); expect(element(by.css('.base-class')).getAttribute('class')). toMatch(/my-class/); element(by.id('clearbtn')).click(); expect(element(by.css('.base-class')).getAttribute('class')).not. toMatch(/my-class/); }); ## ngClass and pre-existing CSS3 Transitions/Animations The ngClass directive still supports CSS3 Transitions/Animations even if they do not follow the ngAnimate CSS naming structure. Upon animation ngAnimate will apply supplementary CSS classes to track the start and end of an animation, but this will not hinder any pre-existing CSS transitions already on the element. To get an idea of what happens during a class-based animation, be sure to view the step by step details of {@link $animate#addClass $animate.addClass} and {@link $animate#removeClass $animate.removeClass}. */ var ngClassDirective = classDirective('', true); /** * @ngdoc directive * @name ngClassOdd * @restrict AC * * @description * The `ngClassOdd` and `ngClassEven` directives work exactly as * {@link ng.directive:ngClass ngClass}, except they work in * conjunction with `ngRepeat` and take effect only on odd (even) rows. * * This directive can be applied only within the scope of an * {@link ng.directive:ngRepeat ngRepeat}. * * @element ANY * @param {expression} ngClassOdd {@link guide/expression Expression} to eval. The result * of the evaluation can be a string representing space delimited class names or an array. * * @example {{name}} .odd { color: red; } .even { color: blue; } it('should check ng-class-odd and ng-class-even', function() { expect(element(by.repeater('name in names').row(0).column('name')).getAttribute('class')). toMatch(/odd/); expect(element(by.repeater('name in names').row(1).column('name')).getAttribute('class')). toMatch(/even/); }); */ var ngClassOddDirective = classDirective('Odd', 0); /** * @ngdoc directive * @name ngClassEven * @restrict AC * * @description * The `ngClassOdd` and `ngClassEven` directives work exactly as * {@link ng.directive:ngClass ngClass}, except they work in * conjunction with `ngRepeat` and take effect only on odd (even) rows. * * This directive can be applied only within the scope of an * {@link ng.directive:ngRepeat ngRepeat}. * * @element ANY * @param {expression} ngClassEven {@link guide/expression Expression} to eval. The * result of the evaluation can be a string representing space delimited class names or an array. * * @example {{name}}       .odd { color: red; } .even { color: blue; } it('should check ng-class-odd and ng-class-even', function() { expect(element(by.repeater('name in names').row(0).column('name')).getAttribute('class')). toMatch(/odd/); expect(element(by.repeater('name in names').row(1).column('name')).getAttribute('class')). toMatch(/even/); }); */ var ngClassEvenDirective = classDirective('Even', 1); /** * @ngdoc directive * @name ngCloak * @restrict AC * * @description * The `ngCloak` directive is used to prevent the Angular html template from being briefly * displayed by the browser in its raw (uncompiled) form while your application is loading. Use this * directive to avoid the undesirable flicker effect caused by the html template display. * * The directive can be applied to the `` element, but the preferred usage is to apply * multiple `ngCloak` directives to small portions of the page to permit progressive rendering * of the browser view. * * `ngCloak` works in cooperation with the following css rule embedded within `angular.js` and * `angular.min.js`. * For CSP mode please add `angular-csp.css` to your html file (see {@link ng.directive:ngCsp ngCsp}). * * ```css * [ng\:cloak], [ng-cloak], [data-ng-cloak], [x-ng-cloak], .ng-cloak, .x-ng-cloak { * display: none !important; * } * ``` * * When this css rule is loaded by the browser, all html elements (including their children) that * are tagged with the `ngCloak` directive are hidden. When Angular encounters this directive * during the compilation of the template it deletes the `ngCloak` element attribute, making * the compiled element visible. * * For the best result, the `angular.js` script must be loaded in the head section of the html * document; alternatively, the css rule above must be included in the external stylesheet of the * application. * * @element ANY * * @example {{ 'hello' }} {{ 'world' }} it('should remove the template directive and css class', function() { expect($('#template1').getAttribute('ng-cloak')). toBeNull(); expect($('#template2').getAttribute('ng-cloak')). toBeNull(); }); * */ var ngCloakDirective = ngDirective({ compile: function(element, attr) { attr.$set('ngCloak', undefined); element.removeClass('ng-cloak'); } }); /** * @ngdoc directive * @name ngController * * @description * The `ngController` directive attaches a controller class to the view. This is a key aspect of how angular * supports the principles behind the Model-View-Controller design pattern. * * MVC components in angular: * * * Model — Models are the properties of a scope; scopes are attached to the DOM where scope properties * are accessed through bindings. * * View — The template (HTML with data bindings) that is rendered into the View. * * Controller — The `ngController` directive specifies a Controller class; the class contains business * logic behind the application to decorate the scope with functions and values * * Note that you can also attach controllers to the DOM by declaring it in a route definition * via the {@link ngRoute.$route $route} service. A common mistake is to declare the controller * again using `ng-controller` in the template itself. This will cause the controller to be attached * and executed twice. * * @element ANY * @scope * @priority 500 * @param {expression} ngController Name of a constructor function registered with the current * {@link ng.$controllerProvider $controllerProvider} or an {@link guide/expression expression} * that on the current scope evaluates to a constructor function. * * The controller instance can be published into a scope property by specifying * `ng-controller="as propertyName"`. * * If the current `$controllerProvider` is configured to use globals (via * {@link ng.$controllerProvider#allowGlobals `$controllerProvider.allowGlobals()` }), this may * also be the name of a globally accessible constructor function (not recommended). * * @example * Here is a simple form for editing user contact information. Adding, removing, clearing, and * greeting are methods declared on the controller (see source tab). These methods can * easily be called from the angular markup. Any changes to the data are automatically reflected * in the View without the need for a manual update. * * Two different declaration styles are included below: * * * one binds methods and properties directly onto the controller using `this`: * `ng-controller="SettingsController1 as settings"` * * one injects `$scope` into the controller: * `ng-controller="SettingsController2"` * * The second option is more common in the Angular community, and is generally used in boilerplates * and in this guide. However, there are advantages to binding properties directly to the controller * and avoiding scope. * * * Using `controller as` makes it obvious which controller you are accessing in the template when * multiple controllers apply to an element. * * If you are writing your controllers as classes you have easier access to the properties and * methods, which will appear on the scope, from inside the controller code. * * Since there is always a `.` in the bindings, you don't have to worry about prototypal * inheritance masking primitives. * * This example demonstrates the `controller as` syntax. * * * * * Name: * greet * Contact: * * * * phone * email * * * clear * X * * add * * * * * angular.module('controllerAsExample', []) * .controller('SettingsController1', SettingsController1); * * function SettingsController1() { * this.name = "John Smith"; * this.contacts = [ * {type: 'phone', value: '408 555 1212'}, * {type: 'email', value: 'john.smith@example.org'} ]; * } * * SettingsController1.prototype.greet = function() { * alert(this.name); * }; * * SettingsController1.prototype.addContact = function() { * this.contacts.push({type: 'email', value: 'yourname@example.org'}); * }; * * SettingsController1.prototype.removeContact = function(contactToRemove) { * var index = this.contacts.indexOf(contactToRemove); * this.contacts.splice(index, 1); * }; * * SettingsController1.prototype.clearContact = function(contact) { * contact.type = 'phone'; * contact.value = ''; * }; * * * it('should check controller as', function() { * var container = element(by.id('ctrl-as-exmpl')); * expect(container.element(by.model('settings.name')) * .getAttribute('value')).toBe('John Smith'); * * var firstRepeat = * container.element(by.repeater('contact in settings.contacts').row(0)); * var secondRepeat = * container.element(by.repeater('contact in settings.contacts').row(1)); * * expect(firstRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe('408 555 1212'); * * expect(secondRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe('john.smith@example.org'); * * firstRepeat.element(by.buttonText('clear')).click(); * * expect(firstRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe(''); * * container.element(by.buttonText('add')).click(); * * expect(container.element(by.repeater('contact in settings.contacts').row(2)) * .element(by.model('contact.value')) * .getAttribute('value')) * .toBe('yourname@example.org'); * }); * * * * This example demonstrates the "attach to `$scope`" style of controller. * * * * * Name: * greet * Contact: * * * * phone * email * * * clear * X * * [ add ] * * * * * angular.module('controllerExample', []) * .controller('SettingsController2', ['$scope', SettingsController2]); * * function SettingsController2($scope) { * $scope.name = "John Smith"; * $scope.contacts = [ * {type:'phone', value:'408 555 1212'}, * {type:'email', value:'john.smith@example.org'} ]; * * $scope.greet = function() { * alert($scope.name); * }; * * $scope.addContact = function() { * $scope.contacts.push({type:'email', value:'yourname@example.org'}); * }; * * $scope.removeContact = function(contactToRemove) { * var index = $scope.contacts.indexOf(contactToRemove); * $scope.contacts.splice(index, 1); * }; * * $scope.clearContact = function(contact) { * contact.type = 'phone'; * contact.value = ''; * }; * } * * * it('should check controller', function() { * var container = element(by.id('ctrl-exmpl')); * * expect(container.element(by.model('name')) * .getAttribute('value')).toBe('John Smith'); * * var firstRepeat = * container.element(by.repeater('contact in contacts').row(0)); * var secondRepeat = * container.element(by.repeater('contact in contacts').row(1)); * * expect(firstRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe('408 555 1212'); * expect(secondRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe('john.smith@example.org'); * * firstRepeat.element(by.buttonText('clear')).click(); * * expect(firstRepeat.element(by.model('contact.value')).getAttribute('value')) * .toBe(''); * * container.element(by.buttonText('add')).click(); * * expect(container.element(by.repeater('contact in contacts').row(2)) * .element(by.model('contact.value')) * .getAttribute('value')) * .toBe('yourname@example.org'); * }); * * */ var ngControllerDirective = [function() { return { restrict: 'A', scope: true, controller: '@', priority: 500 }; }]; /** * @ngdoc directive * @name ngCsp * * @element html * @description * * Angular has some features that can break certain * [CSP (Content Security Policy)](https://developer.mozilla.org/en/Security/CSP) rules. * * If you intend to implement these rules then you must tell Angular not to use these features. * * This is necessary when developing things like Google Chrome Extensions or Universal Windows Apps. * * * The following rules affect Angular: * * * `unsafe-eval`: this rule forbids apps to use `eval` or `Function(string)` generated functions * (among other things). Angular makes use of this in the {@link $parse} service to provide a 30% * increase in the speed of evaluating Angular expressions. * * * `unsafe-inline`: this rule forbids apps from inject custom styles into the document. Angular * makes use of this to include some CSS rules (e.g. {@link ngCloak} and {@link ngHide}). * To make these directives work when a CSP rule is blocking inline styles, you must link to the * `angular-csp.css` in your HTML manually. * * If you do not provide `ngCsp` then Angular tries to autodetect if CSP is blocking unsafe-eval * and automatically deactivates this feature in the {@link $parse} service. This autodetection, * however, triggers a CSP error to be logged in the console: * * ``` * Refused to evaluate a string as JavaScript because 'unsafe-eval' is not an allowed source of * script in the following Content Security Policy directive: "default-src 'self'". Note that * 'script-src' was not explicitly set, so 'default-src' is used as a fallback. * ``` * * This error is harmless but annoying. To prevent the error from showing up, put the `ngCsp` * directive on an element of the HTML document that appears before the ` Enter text and hit enter: list={{list}} it('should check ng-submit', function() { expect(element(by.binding('list')).getText()).toBe('list=[]'); element(by.css('#submit')).click(); expect(element(by.binding('list')).getText()).toContain('hello'); expect(element(by.model('text')).getAttribute('value')).toBe(''); }); it('should ignore empty strings', function() { expect(element(by.binding('list')).getText()).toBe('list=[]'); element(by.css('#submit')).click(); element(by.css('#submit')).click(); expect(element(by.binding('list')).getText()).toContain('hello'); }); */ /** * @ngdoc directive * @name ngFocus * * @description * Specify custom behavior on focus event. * * Note: As the `focus` event is executed synchronously when calling `input.focus()` * AngularJS executes the expression using `scope.$evalAsync` if the event is fired * during an `$apply` to ensure a consistent state. * * @element window, input, select, textarea, a * @priority 0 * @param {expression} ngFocus {@link guide/expression Expression} to evaluate upon * focus. ({@link guide/expression#-event- Event object is available as `$event`}) * * @example * See {@link ng.directive:ngClick ngClick} */ /** * @ngdoc directive * @name ngBlur * * @description * Specify custom behavior on blur event. * * A [blur event](https://developer.mozilla.org/en-US/docs/Web/Events/blur) fires when * an element has lost focus. * * Note: As the `blur` event is executed synchronously also during DOM manipulations * (e.g. removing a focussed input), * AngularJS executes the expression using `scope.$evalAsync` if the event is fired * during an `$apply` to ensure a consistent state. * * @element window, input, select, textarea, a * @priority 0 * @param {expression} ngBlur {@link guide/expression Expression} to evaluate upon * blur. ({@link guide/expression#-event- Event object is available as `$event`}) * * @example * See {@link ng.directive:ngClick ngClick} */ /** * @ngdoc directive * @name ngCopy * * @description * Specify custom behavior on copy event. * * @element window, input, select, textarea, a * @priority 0 * @param {expression} ngCopy {@link guide/expression Expression} to evaluate upon * copy. ({@link guide/expression#-event- Event object is available as `$event`}) * * @example copied: {{copied}} */ /** * @ngdoc directive * @name ngCut * * @description * Specify custom behavior on cut event. * * @element window, input, select, textarea, a * @priority 0 * @param {expression} ngCut {@link guide/expression Expression} to evaluate upon * cut. ({@link guide/expression#-event- Event object is available as `$event`}) * * @example cut: {{cut}} */ /** * @ngdoc directive * @name ngPaste * * @description * Specify custom behavior on paste event. * * @element window, input, select, textarea, a * @priority 0 * @param {expression} ngPaste {@link guide/expression Expression} to evaluate upon * paste. ({@link guide/expression#-event- Event object is available as `$event`}) * * @example pasted: {{paste}} */ /** * @ngdoc directive * @name ngIf * @restrict A * @multiElement * * @description * The `ngIf` directive removes or recreates a portion of the DOM tree based on an * {expression}. If the expression assigned to `ngIf` evaluates to a false * value then the element is removed from the DOM, otherwise a clone of the * element is reinserted into the DOM. * * `ngIf` differs from `ngShow` and `ngHide` in that `ngIf` completely removes and recreates the * element in the DOM rather than changing its visibility via the `display` css property. A common * case when this difference is significant is when using css selectors that rely on an element's * position within the DOM, such as the `:first-child` or `:last-child` pseudo-classes. * * Note that when an element is removed using `ngIf` its scope is destroyed and a new scope * is created when the element is restored. The scope created within `ngIf` inherits from * its parent scope using * [prototypal inheritance](https://github.com/angular/angular.js/wiki/Understanding-Scopes#javascript-prototypal-inheritance). * An important implication of this is if `ngModel` is used within `ngIf` to bind to * a javascript primitive defined in the parent scope. In this case any modifications made to the * variable within the child scope will override (hide) the value in the parent scope. * * Also, `ngIf` recreates elements using their compiled state. An example of this behavior * is if an element's class attribute is directly modified after it's compiled, using something like * jQuery's `.addClass()` method, and the element is later removed. When `ngIf` recreates the element * the added class will be lost because the original compiled state is used to regenerate the element. * * Additionally, you can provide animations via the `ngAnimate` module to animate the `enter` * and `leave` effects. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link ng.$animate#enter enter} | just after the `ngIf` contents change and a new DOM element is created and injected into the `ngIf` container | * | {@link ng.$animate#leave leave} | just before the `ngIf` contents are removed from the DOM | * * @element ANY * @scope * @priority 600 * @param {expression} ngIf If the {@link guide/expression expression} is falsy then * the element is removed from the DOM tree. If it is truthy a copy of the compiled * element is added to the DOM tree. * * @example Click me: Show when checked: This is removed when the checkbox is unchecked. .animate-if { background:white; border:1px solid black; padding:10px; } .animate-if.ng-enter, .animate-if.ng-leave { transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s; } .animate-if.ng-enter, .animate-if.ng-leave.ng-leave-active { opacity:0; } .animate-if.ng-leave, .animate-if.ng-enter.ng-enter-active { opacity:1; } */ var ngIfDirective = ['$animate', '$compile', function($animate, $compile) { return { multiElement: true, transclude: 'element', priority: 600, terminal: true, restrict: 'A', $$tlb: true, link: function($scope, $element, $attr, ctrl, $transclude) { var block, childScope, previousElements; $scope.$watch($attr.ngIf, function ngIfWatchAction(value) { if (value) { if (!childScope) { $transclude(function(clone, newScope) { childScope = newScope; clone[clone.length++] = $compile.$$createComment('end ngIf', $attr.ngIf); // Note: We only need the first/last node of the cloned nodes. // However, we need to keep the reference to the jqlite wrapper as it might be changed later // by a directive with templateUrl when its template arrives. block = { clone: clone }; $animate.enter(clone, $element.parent(), $element); }); } } else { if (previousElements) { previousElements.remove(); previousElements = null; } if (childScope) { childScope.$destroy(); childScope = null; } if (block) { previousElements = getBlockNodes(block.clone); $animate.leave(previousElements).then(function() { previousElements = null; }); block = null; } } }); } }; }]; /** * @ngdoc directive * @name ngInclude * @restrict ECA * * @description * Fetches, compiles and includes an external HTML fragment. * * By default, the template URL is restricted to the same domain and protocol as the * application document. This is done by calling {@link $sce#getTrustedResourceUrl * $sce.getTrustedResourceUrl} on it. To load templates from other domains or protocols * you may either {@link ng.$sceDelegateProvider#resourceUrlWhitelist whitelist them} or * {@link $sce#trustAsResourceUrl wrap them} as trusted values. Refer to Angular's {@link * ng.$sce Strict Contextual Escaping}. * * In addition, the browser's * [Same Origin Policy](https://code.google.com/p/browsersec/wiki/Part2#Same-origin_policy_for_XMLHttpRequest) * and [Cross-Origin Resource Sharing (CORS)](http://www.w3.org/TR/cors/) * policy may further restrict whether the template is successfully loaded. * For example, `ngInclude` won't work for cross-domain requests on all browsers and for `file://` * access on some browsers. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link ng.$animate#enter enter} | when the expression changes, on the new include | * | {@link ng.$animate#leave leave} | when the expression changes, on the old include | * * The enter and leave animation occur concurrently. * * @scope * @priority 400 * * @param {string} ngInclude|src angular expression evaluating to URL. If the source is a string constant, * make sure you wrap it in **single** quotes, e.g. `src="'myPartialTemplate.html'"`. * @param {string=} onload Expression to evaluate when a new partial is loaded. * * **Note:** When using onload on SVG elements in IE11, the browser will try to call * a function with the name on the window element, which will usually throw a * "function is undefined" error. To fix this, you can instead use `data-onload` or a * different form that {@link guide/directive#normalization matches} `onload`. * * * @param {string=} autoscroll Whether `ngInclude` should call {@link ng.$anchorScroll * $anchorScroll} to scroll the viewport after the content is loaded. * * - If the attribute is not set, disable scrolling. * - If the attribute is set without value, enable scrolling. * - Otherwise enable scrolling only if the expression evaluates to truthy value. * * @example (blank) url of the template: {{template.url}} angular.module('includeExample', ['ngAnimate']) .controller('ExampleController', ['$scope', function($scope) { $scope.templates = [ { name: 'template1.html', url: 'template1.html'}, { name: 'template2.html', url: 'template2.html'} ]; $scope.template = $scope.templates[0]; }]); Content of template1.html Content of template2.html .slide-animate-container { position:relative; background:white; border:1px solid black; height:40px; overflow:hidden; } .slide-animate { padding:10px; } .slide-animate.ng-enter, .slide-animate.ng-leave { transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s; position:absolute; top:0; left:0; right:0; bottom:0; display:block; padding:10px; } .slide-animate.ng-enter { top:-50px; } .slide-animate.ng-enter.ng-enter-active { top:0; } .slide-animate.ng-leave { top:0; } .slide-animate.ng-leave.ng-leave-active { top:50px; } var templateSelect = element(by.model('template')); var includeElem = element(by.css('[ng-include]')); it('should load template1.html', function() { expect(includeElem.getText()).toMatch(/Content of template1.html/); }); it('should load template2.html', function() { if (browser.params.browser == 'firefox') { // Firefox can't handle using selects // See https://github.com/angular/protractor/issues/480 return; } templateSelect.click(); templateSelect.all(by.css('option')).get(2).click(); expect(includeElem.getText()).toMatch(/Content of template2.html/); }); it('should change to blank', function() { if (browser.params.browser == 'firefox') { // Firefox can't handle using selects return; } templateSelect.click(); templateSelect.all(by.css('option')).get(0).click(); expect(includeElem.isPresent()).toBe(false); }); */ /** * @ngdoc event * @name ngInclude#$includeContentRequested * @eventType emit on the scope ngInclude was declared in * @description * Emitted every time the ngInclude content is requested. * * @param {Object} angularEvent Synthetic event object. * @param {String} src URL of content to load. */ /** * @ngdoc event * @name ngInclude#$includeContentLoaded * @eventType emit on the current ngInclude scope * @description * Emitted every time the ngInclude content is reloaded. * * @param {Object} angularEvent Synthetic event object. * @param {String} src URL of content to load. */ /** * @ngdoc event * @name ngInclude#$includeContentError * @eventType emit on the scope ngInclude was declared in * @description * Emitted when a template HTTP request yields an erroneous response (status < 200 || status > 299) * * @param {Object} angularEvent Synthetic event object. * @param {String} src URL of content to load. */ var ngIncludeDirective = ['$templateRequest', '$anchorScroll', '$animate', function($templateRequest, $anchorScroll, $animate) { return { restrict: 'ECA', priority: 400, terminal: true, transclude: 'element', controller: angular.noop, compile: function(element, attr) { var srcExp = attr.ngInclude || attr.src, onloadExp = attr.onload || '', autoScrollExp = attr.autoscroll; return function(scope, $element, $attr, ctrl, $transclude) { var changeCounter = 0, currentScope, previousElement, currentElement; var cleanupLastIncludeContent = function() { if (previousElement) { previousElement.remove(); previousElement = null; } if (currentScope) { currentScope.$destroy(); currentScope = null; } if (currentElement) { $animate.leave(currentElement).then(function() { previousElement = null; }); previousElement = currentElement; currentElement = null; } }; scope.$watch(srcExp, function ngIncludeWatchAction(src) { var afterAnimation = function() { if (isDefined(autoScrollExp) && (!autoScrollExp || scope.$eval(autoScrollExp))) { $anchorScroll(); } }; var thisChangeId = ++changeCounter; if (src) { //set the 2nd param to true to ignore the template request error so that the inner //contents and scope can be cleaned up. $templateRequest(src, true).then(function(response) { if (scope.$$destroyed) return; if (thisChangeId !== changeCounter) return; var newScope = scope.$new(); ctrl.template = response; // Note: This will also link all children of ng-include that were contained in the original // html. If that content contains controllers, ... they could pollute/change the scope. // However, using ng-include on an element with additional content does not make sense... // Note: We can't remove them in the cloneAttchFn of $transclude as that // function is called before linking the content, which would apply child // directives to non existing elements. var clone = $transclude(newScope, function(clone) { cleanupLastIncludeContent(); $animate.enter(clone, null, $element).then(afterAnimation); }); currentScope = newScope; currentElement = clone; currentScope.$emit('$includeContentLoaded', src); scope.$eval(onloadExp); }, function() { if (scope.$$destroyed) return; if (thisChangeId === changeCounter) { cleanupLastIncludeContent(); scope.$emit('$includeContentError', src); } }); scope.$emit('$includeContentRequested', src); } else { cleanupLastIncludeContent(); ctrl.template = null; } }); }; } }; }]; // This directive is called during the $transclude call of the first `ngInclude` directive. // It will replace and compile the content of the element with the loaded template. // We need this directive so that the element content is already filled when // the link function of another directive on the same element as ngInclude // is called. var ngIncludeFillContentDirective = ['$compile', function($compile) { return { restrict: 'ECA', priority: -400, require: 'ngInclude', link: function(scope, $element, $attr, ctrl) { if (toString.call($element[0]).match(/SVG/)) { // WebKit: https://bugs.webkit.org/show_bug.cgi?id=135698 --- SVG elements do not // support innerHTML, so detect this here and try to generate the contents // specially. $element.empty(); $compile(jqLiteBuildFragment(ctrl.template, window.document).childNodes)(scope, function namespaceAdaptedClone(clone) { $element.append(clone); }, {futureParentElement: $element}); return; } $element.html(ctrl.template); $compile($element.contents())(scope); } }; }]; /** * @ngdoc directive * @name ngInit * @restrict AC * * @description * The `ngInit` directive allows you to evaluate an expression in the * current scope. * * * This directive can be abused to add unnecessary amounts of logic into your templates. * There are only a few appropriate uses of `ngInit`, such as for aliasing special properties of * {@link ng.directive:ngRepeat `ngRepeat`}, as seen in the demo below; and for injecting data via * server side scripting. Besides these few cases, you should use {@link guide/controller controllers} * rather than `ngInit` to initialize values on a scope. * * * * **Note**: If you have assignment in `ngInit` along with a {@link ng.$filter `filter`}, make * sure you have parentheses to ensure correct operator precedence: * * `` * * * * @priority 450 * * @element ANY * @param {expression} ngInit {@link guide/expression Expression} to eval. * * @example list[ {{outerIndex}} ][ {{innerIndex}} ] = {{value}}; it('should alias index positions', function() { var elements = element.all(by.css('.example-init')); expect(elements.get(0).getText()).toBe('list[ 0 ][ 0 ] = a;'); expect(elements.get(1).getText()).toBe('list[ 0 ][ 1 ] = b;'); expect(elements.get(2).getText()).toBe('list[ 1 ][ 0 ] = c;'); expect(elements.get(3).getText()).toBe('list[ 1 ][ 1 ] = d;'); }); */ var ngInitDirective = ngDirective({ priority: 450, compile: function() { return { pre: function(scope, element, attrs) { scope.$eval(attrs.ngInit); } }; } }); /** * @ngdoc directive * @name ngList * * @description * Text input that converts between a delimited string and an array of strings. The default * delimiter is a comma followed by a space - equivalent to `ng-list=", "`. You can specify a custom * delimiter as the value of the `ngList` attribute - for example, `ng-list=" | "`. * * The behaviour of the directive is affected by the use of the `ngTrim` attribute. * * If `ngTrim` is set to `"false"` then whitespace around both the separator and each * list item is respected. This implies that the user of the directive is responsible for * dealing with whitespace but also allows you to use whitespace as a delimiter, such as a * tab or newline character. * * Otherwise whitespace around the delimiter is ignored when splitting (although it is respected * when joining the list items back together) and whitespace around each list item is stripped * before it is added to the model. * * ### Example with Validation * * * * angular.module('listExample', []) * .controller('ExampleController', ['$scope', function($scope) { * $scope.names = ['morpheus', 'neo', 'trinity']; * }]); * * * * List: * * * Required! * * * names = {{names}} * myForm.namesInput.$valid = {{myForm.namesInput.$valid}} * myForm.namesInput.$error = {{myForm.namesInput.$error}} * myForm.$valid = {{myForm.$valid}} * myForm.$error.required = {{!!myForm.$error.required}} * * * * var listInput = element(by.model('names')); * var names = element(by.exactBinding('names')); * var valid = element(by.binding('myForm.namesInput.$valid')); * var error = element(by.css('span.error')); * * it('should initialize to model', function() { * expect(names.getText()).toContain('["morpheus","neo","trinity"]'); * expect(valid.getText()).toContain('true'); * expect(error.getCssValue('display')).toBe('none'); * }); * * it('should be invalid if empty', function() { * listInput.clear(); * listInput.sendKeys(''); * * expect(names.getText()).toContain(''); * expect(valid.getText()).toContain('false'); * expect(error.getCssValue('display')).not.toBe('none'); * }); * * * * ### Example - splitting on newline * * * * {{ list | json }} * * * it("should split the text by newlines", function() { * var listInput = element(by.model('list')); * var output = element(by.binding('list | json')); * listInput.sendKeys('abc\ndef\nghi'); * expect(output.getText()).toContain('[\n "abc",\n "def",\n "ghi"\n]'); * }); * * * * @element input * @param {string=} ngList optional delimiter that should be used to split the value. */ var ngListDirective = function() { return { restrict: 'A', priority: 100, require: 'ngModel', link: function(scope, element, attr, ctrl) { // We want to control whitespace trimming so we use this convoluted approach // to access the ngList attribute, which doesn't pre-trim the attribute var ngList = element.attr(attr.$attr.ngList) || ', '; var trimValues = attr.ngTrim !== 'false'; var separator = trimValues ? trim(ngList) : ngList; var parse = function(viewValue) { // If the viewValue is invalid (say required but empty) it will be `undefined` if (isUndefined(viewValue)) return; var list = []; if (viewValue) { forEach(viewValue.split(separator), function(value) { if (value) list.push(trimValues ? trim(value) : value); }); } return list; }; ctrl.$parsers.push(parse); ctrl.$formatters.push(function(value) { if (isArray(value)) { return value.join(ngList); } return undefined; }); // Override the standard $isEmpty because an empty array means the input is empty. ctrl.$isEmpty = function(value) { return !value || !value.length; }; } }; }; /* global VALID_CLASS: true, INVALID_CLASS: true, PRISTINE_CLASS: true, DIRTY_CLASS: true, UNTOUCHED_CLASS: true, TOUCHED_CLASS: true, */ var VALID_CLASS = 'ng-valid', INVALID_CLASS = 'ng-invalid', PRISTINE_CLASS = 'ng-pristine', DIRTY_CLASS = 'ng-dirty', UNTOUCHED_CLASS = 'ng-untouched', TOUCHED_CLASS = 'ng-touched', PENDING_CLASS = 'ng-pending', EMPTY_CLASS = 'ng-empty', NOT_EMPTY_CLASS = 'ng-not-empty'; var ngModelMinErr = minErr('ngModel'); /** * @ngdoc type * @name ngModel.NgModelController * * @property {*} $viewValue The actual value from the control's view. For `input` elements, this is a * String. See {@link ngModel.NgModelController#$setViewValue} for information about when the $viewValue * is set. * @property {*} $modelValue The value in the model that the control is bound to. * @property {Array.} $parsers Array of functions to execute, as a pipeline, whenever the control reads value from the DOM. The functions are called in array order, each passing its return value through to the next. The last return value is forwarded to the {@link ngModel.NgModelController#$validators `$validators`} collection. Parsers are used to sanitize / convert the {@link ngModel.NgModelController#$viewValue `$viewValue`}. Returning `undefined` from a parser means a parse error occurred. In that case, no {@link ngModel.NgModelController#$validators `$validators`} will run and the `ngModel` will be set to `undefined` unless {@link ngModelOptions `ngModelOptions.allowInvalid`} is set to `true`. The parse error is stored in `ngModel.$error.parse`. * * @property {Array.} $formatters Array of functions to execute, as a pipeline, whenever the model value changes. The functions are called in reverse array order, each passing the value through to the next. The last return value is used as the actual DOM value. Used to format / convert values for display in the control. * ```js * function formatter(value) { * if (value) { * return value.toUpperCase(); * } * } * ngModel.$formatters.push(formatter); * ``` * * @property {Object.} $validators A collection of validators that are applied * whenever the model value changes. The key value within the object refers to the name of the * validator while the function refers to the validation operation. The validation operation is * provided with the model value as an argument and must return a true or false value depending * on the response of that validation. * * ```js * ngModel.$validators.validCharacters = function(modelValue, viewValue) { * var value = modelValue || viewValue; * return /[0-9]+/.test(value) && * /[a-z]+/.test(value) && * /[A-Z]+/.test(value) && * /\W+/.test(value); * }; * ``` * * @property {Object.} $asyncValidators A collection of validations that are expected to * perform an asynchronous validation (e.g. a HTTP request). The validation function that is provided * is expected to return a promise when it is run during the model validation process. Once the promise * is delivered then the validation status will be set to true when fulfilled and false when rejected. * When the asynchronous validators are triggered, each of the validators will run in parallel and the model * value will only be updated once all validators have been fulfilled. As long as an asynchronous validator * is unfulfilled, its key will be added to the controllers `$pending` property. Also, all asynchronous validators * will only run once all synchronous validators have passed. * * Please note that if $http is used then it is important that the server returns a success HTTP response code * in order to fulfill the validation and a status level of `4xx` in order to reject the validation. * * ```js * ngModel.$asyncValidators.uniqueUsername = function(modelValue, viewValue) { * var value = modelValue || viewValue; * * // Lookup user by username * return $http.get('/api/users/' + value). * then(function resolved() { * //username exists, this means validation fails * return $q.reject('exists'); * }, function rejected() { * //username does not exist, therefore this validation passes * return true; * }); * }; * ``` * * @property {Array.} $viewChangeListeners Array of functions to execute whenever the * view value has changed. It is called with no arguments, and its return value is ignored. * This can be used in place of additional $watches against the model value. * * @property {Object} $error An object hash with all failing validator ids as keys. * @property {Object} $pending An object hash with all pending validator ids as keys. * * @property {boolean} $untouched True if control has not lost focus yet. * @property {boolean} $touched True if control has lost focus. * @property {boolean} $pristine True if user has not interacted with the control yet. * @property {boolean} $dirty True if user has already interacted with the control. * @property {boolean} $valid True if there is no error. * @property {boolean} $invalid True if at least one error on the control. * @property {string} $name The name attribute of the control. * * @description * * `NgModelController` provides API for the {@link ngModel `ngModel`} directive. * The controller contains services for data-binding, validation, CSS updates, and value formatting * and parsing. It purposefully does not contain any logic which deals with DOM rendering or * listening to DOM events. * Such DOM related logic should be provided by other directives which make use of * `NgModelController` for data-binding to control elements. * Angular provides this DOM logic for most {@link input `input`} elements. * At the end of this page you can find a {@link ngModel.NgModelController#custom-control-example * custom control example} that uses `ngModelController` to bind to `contenteditable` elements. * * @example * ### Custom Control Example * This example shows how to use `NgModelController` with a custom control to achieve * data-binding. Notice how different directives (`contenteditable`, `ng-model`, and `required`) * collaborate together to achieve the desired result. * * `contenteditable` is an HTML5 attribute, which tells the browser to let the element * contents be edited in place by the user. * * We are using the {@link ng.service:$sce $sce} service here and include the {@link ngSanitize $sanitize} * module to automatically remove "bad" content like inline event listener (e.g. ``). * However, as we are using `$sce` the model can still decide to provide unsafe content if it marks * that content using the `$sce` service. * * [contenteditable] { border: 1px solid black; background-color: white; min-height: 20px; } .ng-invalid { border: 1px solid red; } angular.module('customControl', ['ngSanitize']). directive('contenteditable', ['$sce', function($sce) { return { restrict: 'A', // only activate on element attribute require: '?ngModel', // get a hold of NgModelController link: function(scope, element, attrs, ngModel) { if (!ngModel) return; // do nothing if no ng-model // Specify how UI should be updated ngModel.$render = function() { element.html($sce.getTrustedHtml(ngModel.$viewValue || '')); }; // Listen for change events to enable binding element.on('blur keyup change', function() { scope.$evalAsync(read); }); read(); // initialize // Write data to the model function read() { var html = element.html(); // When we clear the content editable the browser leaves a behind // If strip-br attribute is provided then we strip this out if ( attrs.stripBr && html == '' ) { html = ''; } ngModel.$setViewValue(html); } } }; }]); Change me! Required! it('should data-bind and become invalid', function() { if (browser.params.browser == 'safari' || browser.params.browser == 'firefox') { // SafariDriver can't handle contenteditable // and Firefox driver can't clear contenteditables very well return; } var contentEditable = element(by.css('[contenteditable]')); var content = 'Change me!'; expect(contentEditable.getText()).toEqual(content); contentEditable.clear(); contentEditable.sendKeys(protractor.Key.BACK_SPACE); expect(contentEditable.getText()).toEqual(''); expect(contentEditable.getAttribute('class')).toMatch(/ng-invalid-required/); }); * * * */ var NgModelController = ['$scope', '$exceptionHandler', '$attrs', '$element', '$parse', '$animate', '$timeout', '$rootScope', '$q', '$interpolate', function($scope, $exceptionHandler, $attr, $element, $parse, $animate, $timeout, $rootScope, $q, $interpolate) { this.$viewValue = Number.NaN; this.$modelValue = Number.NaN; this.$$rawModelValue = undefined; // stores the parsed modelValue / model set from scope regardless of validity. this.$validators = {}; this.$asyncValidators = {}; this.$parsers = []; this.$formatters = []; this.$viewChangeListeners = []; this.$untouched = true; this.$touched = false; this.$pristine = true; this.$dirty = false; this.$valid = true; this.$invalid = false; this.$error = {}; // keep invalid keys here this.$$success = {}; // keep valid keys here this.$pending = undefined; // keep pending keys here this.$name = $interpolate($attr.name || '', false)($scope); this.$$parentForm = nullFormCtrl; var parsedNgModel = $parse($attr.ngModel), parsedNgModelAssign = parsedNgModel.assign, ngModelGet = parsedNgModel, ngModelSet = parsedNgModelAssign, pendingDebounce = null, parserValid, ctrl = this; this.$$setOptions = function(options) { ctrl.$options = options; if (options && options.getterSetter) { var invokeModelGetter = $parse($attr.ngModel + '()'), invokeModelSetter = $parse($attr.ngModel + '($$$p)'); ngModelGet = function($scope) { var modelValue = parsedNgModel($scope); if (isFunction(modelValue)) { modelValue = invokeModelGetter($scope); } return modelValue; }; ngModelSet = function($scope, newValue) { if (isFunction(parsedNgModel($scope))) { invokeModelSetter($scope, {$$$p: newValue}); } else { parsedNgModelAssign($scope, newValue); } }; } else if (!parsedNgModel.assign) { throw ngModelMinErr('nonassign', "Expression '{0}' is non-assignable. Element: {1}", $attr.ngModel, startingTag($element)); } }; /** * @ngdoc method * @name ngModel.NgModelController#$render * * @description * Called when the view needs to be updated. It is expected that the user of the ng-model * directive will implement this method. * * The `$render()` method is invoked in the following situations: * * * `$rollbackViewValue()` is called. If we are rolling back the view value to the last * committed value then `$render()` is called to update the input control. * * The value referenced by `ng-model` is changed programmatically and both the `$modelValue` and * the `$viewValue` are different from last time. * * Since `ng-model` does not do a deep watch, `$render()` is only invoked if the values of * `$modelValue` and `$viewValue` are actually different from their previous values. If `$modelValue` * or `$viewValue` are objects (rather than a string or number) then `$render()` will not be * invoked if you only change a property on the objects. */ this.$render = noop; /** * @ngdoc method * @name ngModel.NgModelController#$isEmpty * * @description * This is called when we need to determine if the value of an input is empty. * * For instance, the required directive does this to work out if the input has data or not. * * The default `$isEmpty` function checks whether the value is `undefined`, `''`, `null` or `NaN`. * * You can override this for input directives whose concept of being empty is different from the * default. The `checkboxInputType` directive does this because in its case a value of `false` * implies empty. * * @param {*} value The value of the input to check for emptiness. * @returns {boolean} True if `value` is "empty". */ this.$isEmpty = function(value) { return isUndefined(value) || value === '' || value === null || value !== value; }; this.$$updateEmptyClasses = function(value) { if (ctrl.$isEmpty(value)) { $animate.removeClass($element, NOT_EMPTY_CLASS); $animate.addClass($element, EMPTY_CLASS); } else { $animate.removeClass($element, EMPTY_CLASS); $animate.addClass($element, NOT_EMPTY_CLASS); } }; var currentValidationRunId = 0; /** * @ngdoc method * @name ngModel.NgModelController#$setValidity * * @description * Change the validity state, and notify the form. * * This method can be called within $parsers/$formatters or a custom validation implementation. * However, in most cases it should be sufficient to use the `ngModel.$validators` and * `ngModel.$asyncValidators` collections which will call `$setValidity` automatically. * * @param {string} validationErrorKey Name of the validator. The `validationErrorKey` will be assigned * to either `$error[validationErrorKey]` or `$pending[validationErrorKey]` * (for unfulfilled `$asyncValidators`), so that it is available for data-binding. * The `validationErrorKey` should be in camelCase and will get converted into dash-case * for class name. Example: `myError` will result in `ng-valid-my-error` and `ng-invalid-my-error` * class and can be bound to as `{{someForm.someControl.$error.myError}}` . * @param {boolean} isValid Whether the current state is valid (true), invalid (false), pending (undefined), * or skipped (null). Pending is used for unfulfilled `$asyncValidators`. * Skipped is used by Angular when validators do not run because of parse errors and * when `$asyncValidators` do not run because any of the `$validators` failed. */ addSetValidityMethod({ ctrl: this, $element: $element, set: function(object, property) { object[property] = true; }, unset: function(object, property) { delete object[property]; }, $animate: $animate }); /** * @ngdoc method * @name ngModel.NgModelController#$setPristine * * @description * Sets the control to its pristine state. * * This method can be called to remove the `ng-dirty` class and set the control to its pristine * state (`ng-pristine` class). A model is considered to be pristine when the control * has not been changed from when first compiled. */ this.$setPristine = function() { ctrl.$dirty = false; ctrl.$pristine = true; $animate.removeClass($element, DIRTY_CLASS); $animate.addClass($element, PRISTINE_CLASS); }; /** * @ngdoc method * @name ngModel.NgModelController#$setDirty * * @description * Sets the control to its dirty state. * * This method can be called to remove the `ng-pristine` class and set the control to its dirty * state (`ng-dirty` class). A model is considered to be dirty when the control has been changed * from when first compiled. */ this.$setDirty = function() { ctrl.$dirty = true; ctrl.$pristine = false; $animate.removeClass($element, PRISTINE_CLASS); $animate.addClass($element, DIRTY_CLASS); ctrl.$$parentForm.$setDirty(); }; /** * @ngdoc method * @name ngModel.NgModelController#$setUntouched * * @description * Sets the control to its untouched state. * * This method can be called to remove the `ng-touched` class and set the control to its * untouched state (`ng-untouched` class). Upon compilation, a model is set as untouched * by default, however this function can be used to restore that state if the model has * already been touched by the user. */ this.$setUntouched = function() { ctrl.$touched = false; ctrl.$untouched = true; $animate.setClass($element, UNTOUCHED_CLASS, TOUCHED_CLASS); }; /** * @ngdoc method * @name ngModel.NgModelController#$setTouched * * @description * Sets the control to its touched state. * * This method can be called to remove the `ng-untouched` class and set the control to its * touched state (`ng-touched` class). A model is considered to be touched when the user has * first focused the control element and then shifted focus away from the control (blur event). */ this.$setTouched = function() { ctrl.$touched = true; ctrl.$untouched = false; $animate.setClass($element, TOUCHED_CLASS, UNTOUCHED_CLASS); }; /** * @ngdoc method * @name ngModel.NgModelController#$rollbackViewValue * * @description * Cancel an update and reset the input element's value to prevent an update to the `$modelValue`, * which may be caused by a pending debounced event or because the input is waiting for a some * future event. * * If you have an input that uses `ng-model-options` to set up debounced updates or updates that * depend on special events such as blur, you can have a situation where there is a period when * the `$viewValue` is out of sync with the ngModel's `$modelValue`. * * In this case, you can use `$rollbackViewValue()` to manually cancel the debounced / future update * and reset the input to the last committed view value. * * It is also possible that you run into difficulties if you try to update the ngModel's `$modelValue` * programmatically before these debounced/future events have resolved/occurred, because Angular's * dirty checking mechanism is not able to tell whether the model has actually changed or not. * * The `$rollbackViewValue()` method should be called before programmatically changing the model of an * input which may have such events pending. This is important in order to make sure that the * input field will be updated with the new model value and any pending operations are cancelled. * * * * angular.module('cancel-update-example', []) * * .controller('CancelUpdateController', ['$scope', function($scope) { * $scope.model = {}; * * $scope.setEmpty = function(e, value, rollback) { * if (e.keyCode == 27) { * e.preventDefault(); * if (rollback) { * $scope.myForm[value].$rollbackViewValue(); * } * $scope.model[value] = ''; * } * }; * }]); * * * * Both of these inputs are only updated if they are blurred. Hitting escape should * empty them. Follow these steps and observe the difference: * * Type something in the input. You will see that the model is not yet updated * Press the Escape key. * * In the first example, nothing happens, because the model is already '', and no * update is detected. If you blur the input, the model will be set to the current view. * * In the second example, the pending update is cancelled, and the input is set back * to the last committed view value (''). Blurring the input does nothing. * * * * * * * * Without $rollbackViewValue(): * * value1: "{{ model.value1 }}" * * * * With $rollbackViewValue(): * * value2: "{{ model.value2 }}" * * * * div { display: table-cell; } div:nth-child(1) { padding-right: 30px; } * */ this.$rollbackViewValue = function() { $timeout.cancel(pendingDebounce); ctrl.$viewValue = ctrl.$$lastCommittedViewValue; ctrl.$render(); }; /** * @ngdoc method * @name ngModel.NgModelController#$validate * * @description * Runs each of the registered validators (first synchronous validators and then * asynchronous validators). * If the validity changes to invalid, the model will be set to `undefined`, * unless {@link ngModelOptions `ngModelOptions.allowInvalid`} is `true`. * If the validity changes to valid, it will set the model to the last available valid * `$modelValue`, i.e. either the last parsed value or the last value set from the scope. */ this.$validate = function() { // ignore $validate before model is initialized if (isNumber(ctrl.$modelValue) && isNaN(ctrl.$modelValue)) { return; } var viewValue = ctrl.$$lastCommittedViewValue; // Note: we use the $$rawModelValue as $modelValue might have been // set to undefined during a view -> model update that found validation // errors. We can't parse the view here, since that could change // the model although neither viewValue nor the model on the scope changed var modelValue = ctrl.$$rawModelValue; var prevValid = ctrl.$valid; var prevModelValue = ctrl.$modelValue; var allowInvalid = ctrl.$options && ctrl.$options.allowInvalid; ctrl.$$runValidators(modelValue, viewValue, function(allValid) { // If there was no change in validity, don't update the model // This prevents changing an invalid modelValue to undefined if (!allowInvalid && prevValid !== allValid) { // Note: Don't check ctrl.$valid here, as we could have // external validators (e.g. calculated on the server), // that just call $setValidity and need the model value // to calculate their validity. ctrl.$modelValue = allValid ? modelValue : undefined; if (ctrl.$modelValue !== prevModelValue) { ctrl.$$writeModelToScope(); } } }); }; this.$$runValidators = function(modelValue, viewValue, doneCallback) { currentValidationRunId++; var localValidationRunId = currentValidationRunId; // check parser error if (!processParseErrors()) { validationDone(false); return; } if (!processSyncValidators()) { validationDone(false); return; } processAsyncValidators(); function processParseErrors() { var errorKey = ctrl.$$parserName || 'parse'; if (isUndefined(parserValid)) { setValidity(errorKey, null); } else { if (!parserValid) { forEach(ctrl.$validators, function(v, name) { setValidity(name, null); }); forEach(ctrl.$asyncValidators, function(v, name) { setValidity(name, null); }); } // Set the parse error last, to prevent unsetting it, should a $validators key == parserName setValidity(errorKey, parserValid); return parserValid; } return true; } function processSyncValidators() { var syncValidatorsValid = true; forEach(ctrl.$validators, function(validator, name) { var result = validator(modelValue, viewValue); syncValidatorsValid = syncValidatorsValid && result; setValidity(name, result); }); if (!syncValidatorsValid) { forEach(ctrl.$asyncValidators, function(v, name) { setValidity(name, null); }); return false; } return true; } function processAsyncValidators() { var validatorPromises = []; var allValid = true; forEach(ctrl.$asyncValidators, function(validator, name) { var promise = validator(modelValue, viewValue); if (!isPromiseLike(promise)) { throw ngModelMinErr('nopromise', "Expected asynchronous validator to return a promise but got '{0}' instead.", promise); } setValidity(name, undefined); validatorPromises.push(promise.then(function() { setValidity(name, true); }, function() { allValid = false; setValidity(name, false); })); }); if (!validatorPromises.length) { validationDone(true); } else { $q.all(validatorPromises).then(function() { validationDone(allValid); }, noop); } } function setValidity(name, isValid) { if (localValidationRunId === currentValidationRunId) { ctrl.$setValidity(name, isValid); } } function validationDone(allValid) { if (localValidationRunId === currentValidationRunId) { doneCallback(allValid); } } }; /** * @ngdoc method * @name ngModel.NgModelController#$commitViewValue * * @description * Commit a pending update to the `$modelValue`. * * Updates may be pending by a debounced event or because the input is waiting for a some future * event defined in `ng-model-options`. this method is rarely needed as `NgModelController` * usually handles calling this in response to input events. */ this.$commitViewValue = function() { var viewValue = ctrl.$viewValue; $timeout.cancel(pendingDebounce); // If the view value has not changed then we should just exit, except in the case where there is // a native validator on the element. In this case the validation state may have changed even though // the viewValue has stayed empty. if (ctrl.$$lastCommittedViewValue === viewValue && (viewValue !== '' || !ctrl.$$hasNativeValidators)) { return; } ctrl.$$updateEmptyClasses(viewValue); ctrl.$$lastCommittedViewValue = viewValue; // change to dirty if (ctrl.$pristine) { this.$setDirty(); } this.$$parseAndValidate(); }; this.$$parseAndValidate = function() { var viewValue = ctrl.$$lastCommittedViewValue; var modelValue = viewValue; parserValid = isUndefined(modelValue) ? undefined : true; if (parserValid) { for (var i = 0; i < ctrl.$parsers.length; i++) { modelValue = ctrl.$parsers[i](modelValue); if (isUndefined(modelValue)) { parserValid = false; break; } } } if (isNumber(ctrl.$modelValue) && isNaN(ctrl.$modelValue)) { // ctrl.$modelValue has not been touched yet... ctrl.$modelValue = ngModelGet($scope); } var prevModelValue = ctrl.$modelValue; var allowInvalid = ctrl.$options && ctrl.$options.allowInvalid; ctrl.$$rawModelValue = modelValue; if (allowInvalid) { ctrl.$modelValue = modelValue; writeToModelIfNeeded(); } // Pass the $$lastCommittedViewValue here, because the cached viewValue might be out of date. // This can happen if e.g. $setViewValue is called from inside a parser ctrl.$$runValidators(modelValue, ctrl.$$lastCommittedViewValue, function(allValid) { if (!allowInvalid) { // Note: Don't check ctrl.$valid here, as we could have // external validators (e.g. calculated on the server), // that just call $setValidity and need the model value // to calculate their validity. ctrl.$modelValue = allValid ? modelValue : undefined; writeToModelIfNeeded(); } }); function writeToModelIfNeeded() { if (ctrl.$modelValue !== prevModelValue) { ctrl.$$writeModelToScope(); } } }; this.$$writeModelToScope = function() { ngModelSet($scope, ctrl.$modelValue); forEach(ctrl.$viewChangeListeners, function(listener) { try { listener(); } catch (e) { $exceptionHandler(e); } }); }; /** * @ngdoc method * @name ngModel.NgModelController#$setViewValue * * @description * Update the view value. * * This method should be called when a control wants to change the view value; typically, * this is done from within a DOM event handler. For example, the {@link ng.directive:input input} * directive calls it when the value of the input changes and {@link ng.directive:select select} * calls it when an option is selected. * * When `$setViewValue` is called, the new `value` will be staged for committing through the `$parsers` * and `$validators` pipelines. If there are no special {@link ngModelOptions} specified then the staged * value sent directly for processing, finally to be applied to `$modelValue` and then the * **expression** specified in the `ng-model` attribute. Lastly, all the registered change listeners, * in the `$viewChangeListeners` list, are called. * * In case the {@link ng.directive:ngModelOptions ngModelOptions} directive is used with `updateOn` * and the `default` trigger is not listed, all those actions will remain pending until one of the * `updateOn` events is triggered on the DOM element. * All these actions will be debounced if the {@link ng.directive:ngModelOptions ngModelOptions} * directive is used with a custom debounce for this particular event. * Note that a `$digest` is only triggered once the `updateOn` events are fired, or if `debounce` * is specified, once the timer runs out. * * When used with standard inputs, the view value will always be a string (which is in some cases * parsed into another type, such as a `Date` object for `input[date]`.) * However, custom controls might also pass objects to this method. In this case, we should make * a copy of the object before passing it to `$setViewValue`. This is because `ngModel` does not * perform a deep watch of objects, it only looks for a change of identity. If you only change * the property of the object then ngModel will not realize that the object has changed and * will not invoke the `$parsers` and `$validators` pipelines. For this reason, you should * not change properties of the copy once it has been passed to `$setViewValue`. * Otherwise you may cause the model value on the scope to change incorrectly. * * * In any case, the value passed to the method should always reflect the current value * of the control. For example, if you are calling `$setViewValue` for an input element, * you should pass the input DOM value. Otherwise, the control and the scope model become * out of sync. It's also important to note that `$setViewValue` does not call `$render` or change * the control's DOM value in any way. If we want to change the control's DOM value * programmatically, we should update the `ngModel` scope expression. Its new value will be * picked up by the model controller, which will run it through the `$formatters`, `$render` it * to update the DOM, and finally call `$validate` on it. * * * @param {*} value value from the view. * @param {string} trigger Event that triggered the update. */ this.$setViewValue = function(value, trigger) { ctrl.$viewValue = value; if (!ctrl.$options || ctrl.$options.updateOnDefault) { ctrl.$$debounceViewValueCommit(trigger); } }; this.$$debounceViewValueCommit = function(trigger) { var debounceDelay = 0, options = ctrl.$options, debounce; if (options && isDefined(options.debounce)) { debounce = options.debounce; if (isNumber(debounce)) { debounceDelay = debounce; } else if (isNumber(debounce[trigger])) { debounceDelay = debounce[trigger]; } else if (isNumber(debounce['default'])) { debounceDelay = debounce['default']; } } $timeout.cancel(pendingDebounce); if (debounceDelay) { pendingDebounce = $timeout(function() { ctrl.$commitViewValue(); }, debounceDelay); } else if ($rootScope.$$phase) { ctrl.$commitViewValue(); } else { $scope.$apply(function() { ctrl.$commitViewValue(); }); } }; // model -> value // Note: we cannot use a normal scope.$watch as we want to detect the following: // 1. scope value is 'a' // 2. user enters 'b' // 3. ng-change kicks in and reverts scope value to 'a' // -> scope value did not change since the last digest as // ng-change executes in apply phase // 4. view should be changed back to 'a' $scope.$watch(function ngModelWatch() { var modelValue = ngModelGet($scope); // if scope model value and ngModel value are out of sync // TODO(perf): why not move this to the action fn? if (modelValue !== ctrl.$modelValue && // checks for NaN is needed to allow setting the model to NaN when there's an asyncValidator (ctrl.$modelValue === ctrl.$modelValue || modelValue === modelValue) ) { ctrl.$modelValue = ctrl.$$rawModelValue = modelValue; parserValid = undefined; var formatters = ctrl.$formatters, idx = formatters.length; var viewValue = modelValue; while (idx--) { viewValue = formatters[idx](viewValue); } if (ctrl.$viewValue !== viewValue) { ctrl.$$updateEmptyClasses(viewValue); ctrl.$viewValue = ctrl.$$lastCommittedViewValue = viewValue; ctrl.$render(); ctrl.$$runValidators(modelValue, viewValue, noop); } } return modelValue; }); }]; /** * @ngdoc directive * @name ngModel * * @element input * @priority 1 * * @description * The `ngModel` directive binds an `input`,`select`, `textarea` (or custom form control) to a * property on the scope using {@link ngModel.NgModelController NgModelController}, * which is created and exposed by this directive. * * `ngModel` is responsible for: * * - Binding the view into the model, which other directives such as `input`, `textarea` or `select` * require. * - Providing validation behavior (i.e. required, number, email, url). * - Keeping the state of the control (valid/invalid, dirty/pristine, touched/untouched, validation errors). * - Setting related css classes on the element (`ng-valid`, `ng-invalid`, `ng-dirty`, `ng-pristine`, `ng-touched`, * `ng-untouched`, `ng-empty`, `ng-not-empty`) including animations. * - Registering the control with its parent {@link ng.directive:form form}. * * Note: `ngModel` will try to bind to the property given by evaluating the expression on the * current scope. If the property doesn't already exist on this scope, it will be created * implicitly and added to the scope. * * For best practices on using `ngModel`, see: * * - [Understanding Scopes](https://github.com/angular/angular.js/wiki/Understanding-Scopes) * * For basic examples, how to use `ngModel`, see: * * - {@link ng.directive:input input} * - {@link input[text] text} * - {@link input[checkbox] checkbox} * - {@link input[radio] radio} * - {@link input[number] number} * - {@link input[email] email} * - {@link input[url] url} * - {@link input[date] date} * - {@link input[datetime-local] datetime-local} * - {@link input[time] time} * - {@link input[month] month} * - {@link input[week] week} * - {@link ng.directive:select select} * - {@link ng.directive:textarea textarea} * * # Complex Models (objects or collections) * * By default, `ngModel` watches the model by reference, not value. This is important to know when * binding inputs to models that are objects (e.g. `Date`) or collections (e.g. arrays). If only properties of the * object or collection change, `ngModel` will not be notified and so the input will not be re-rendered. * * The model must be assigned an entirely new object or collection before a re-rendering will occur. * * Some directives have options that will cause them to use a custom `$watchCollection` on the model expression * - for example, `ngOptions` will do so when a `track by` clause is included in the comprehension expression or * if the select is given the `multiple` attribute. * * The `$watchCollection()` method only does a shallow comparison, meaning that changing properties deeper than the * first level of the object (or only changing the properties of an item in the collection if it's an array) will still * not trigger a re-rendering of the model. * * # CSS classes * The following CSS classes are added and removed on the associated input/select/textarea element * depending on the validity of the model. * * - `ng-valid`: the model is valid * - `ng-invalid`: the model is invalid * - `ng-valid-[key]`: for each valid key added by `$setValidity` * - `ng-invalid-[key]`: for each invalid key added by `$setValidity` * - `ng-pristine`: the control hasn't been interacted with yet * - `ng-dirty`: the control has been interacted with * - `ng-touched`: the control has been blurred * - `ng-untouched`: the control hasn't been blurred * - `ng-pending`: any `$asyncValidators` are unfulfilled * - `ng-empty`: the view does not contain a value or the value is deemed "empty", as defined * by the {@link ngModel.NgModelController#$isEmpty} method * - `ng-not-empty`: the view contains a non-empty value * * Keep in mind that ngAnimate can detect each of these classes when added and removed. * * ## Animation Hooks * * Animations within models are triggered when any of the associated CSS classes are added and removed * on the input element which is attached to the model. These classes include: `.ng-pristine`, `.ng-dirty`, * `.ng-invalid` and `.ng-valid` as well as any other validations that are performed on the model itself. * The animations that are triggered within ngModel are similar to how they work in ngClass and * animations can be hooked into using CSS transitions, keyframes as well as JS animations. * * The following example shows a simple way to utilize CSS transitions to style an input element * that has been rendered as invalid after it has been validated: * * * //be sure to include ngAnimate as a module to hook into more * //advanced animations * .my-input { * transition:0.5s linear all; * background: white; * } * .my-input.ng-invalid { * background: red; * color:white; * } * * * @example * Update input to see transitions when valid/invalid. Integer is a valid value. * * * ## Binding to a getter/setter * * Sometimes it's helpful to bind `ngModel` to a getter/setter function. A getter/setter is a * function that returns a representation of the model when called with zero arguments, and sets * the internal state of a model when called with an argument. It's sometimes useful to use this * for models that have an internal representation that's different from what the model exposes * to the view. * * * **Best Practice:** It's best to keep getters fast because Angular is likely to call them more * frequently than other parts of your code. * * * You use this behavior by adding `ng-model-options="{ getterSetter: true }"` to an element that * has `ng-model` attached to it. You can also add `ng-model-options="{ getterSetter: true }"` to * a ``, which will enable this behavior for all ``s within it. See * {@link ng.directive:ngModelOptions `ngModelOptions`} for more. * * The following example shows how to use `ngModel` with a getter/setter: * * @example * Name: user.name = angular.module('getterSetterExample', []) .controller('ExampleController', ['$scope', function($scope) { var _name = 'Brian'; $scope.user = { name: function(newName) { // Note that newName can be undefined for two reasons: // 1. Because it is called as a getter and thus called with no arguments // 2. Because the property should actually be set to undefined. This happens e.g. if the // input is invalid return arguments.length ? (_name = newName) : _name; } }; }]); * */ var ngModelDirective = ['$rootScope', function($rootScope) { return { restrict: 'A', require: ['ngModel', '^?form', '^?ngModelOptions'], controller: NgModelController, // Prelink needs to run before any input directive // so that we can set the NgModelOptions in NgModelController // before anyone else uses it. priority: 1, compile: function ngModelCompile(element) { // Setup initial state of the control element.addClass(PRISTINE_CLASS).addClass(UNTOUCHED_CLASS).addClass(VALID_CLASS); return { pre: function ngModelPreLink(scope, element, attr, ctrls) { var modelCtrl = ctrls[0], formCtrl = ctrls[1] || modelCtrl.$$parentForm; modelCtrl.$$setOptions(ctrls[2] && ctrls[2].$options); // notify others, especially parent forms formCtrl.$addControl(modelCtrl); attr.$observe('name', function(newValue) { if (modelCtrl.$name !== newValue) { modelCtrl.$$parentForm.$$renameControl(modelCtrl, newValue); } }); scope.$on('$destroy', function() { modelCtrl.$$parentForm.$removeControl(modelCtrl); }); }, post: function ngModelPostLink(scope, element, attr, ctrls) { var modelCtrl = ctrls[0]; if (modelCtrl.$options && modelCtrl.$options.updateOn) { element.on(modelCtrl.$options.updateOn, function(ev) { modelCtrl.$$debounceViewValueCommit(ev && ev.type); }); } element.on('blur', function() { if (modelCtrl.$touched) return; if ($rootScope.$$phase) { scope.$evalAsync(modelCtrl.$setTouched); } else { scope.$apply(modelCtrl.$setTouched); } }); } }; } }; }]; var DEFAULT_REGEXP = /(\s+|^)default(\s+|$)/; /** * @ngdoc directive * @name ngModelOptions * * @description * Allows tuning how model updates are done. Using `ngModelOptions` you can specify a custom list of * events that will trigger a model update and/or a debouncing delay so that the actual update only * takes place when a timer expires; this timer will be reset after another change takes place. * * Given the nature of `ngModelOptions`, the value displayed inside input fields in the view might * be different from the value in the actual model. This means that if you update the model you * should also invoke {@link ngModel.NgModelController `$rollbackViewValue`} on the relevant input field in * order to make sure it is synchronized with the model and that any debounced action is canceled. * * The easiest way to reference the control's {@link ngModel.NgModelController `$rollbackViewValue`} * method is by making sure the input is placed inside a form that has a `name` attribute. This is * important because `form` controllers are published to the related scope under the name in their * `name` attribute. * * Any pending changes will take place immediately when an enclosing form is submitted via the * `submit` event. Note that `ngClick` events will occur before the model is updated. Use `ngSubmit` * to have access to the updated model. * * `ngModelOptions` has an effect on the element it's declared on and its descendants. * * @param {Object} ngModelOptions options to apply to the current model. Valid keys are: * - `updateOn`: string specifying which event should the input be bound to. You can set several * events using an space delimited list. There is a special event called `default` that * matches the default events belonging of the control. * - `debounce`: integer value which contains the debounce model update value in milliseconds. A * value of 0 triggers an immediate update. If an object is supplied instead, you can specify a * custom value for each event. For example: * `ng-model-options="{ updateOn: 'default blur', debounce: { 'default': 500, 'blur': 0 } }"` * - `allowInvalid`: boolean value which indicates that the model can be set with values that did * not validate correctly instead of the default behavior of setting the model to undefined. * - `getterSetter`: boolean value which determines whether or not to treat functions bound to `ngModel` as getters/setters. * - `timezone`: Defines the timezone to be used to read/write the `Date` instance in the model for * ``, ``, ... . It understands UTC/GMT and the * continental US time zone abbreviations, but for general use, use a time zone offset, for * example, `'+0430'` (4 hours, 30 minutes east of the Greenwich meridian) * If not specified, the timezone of the browser will be used. * * @example The following example shows how to override immediate updates. Changes on the inputs within the form will update the model only when the control loses focus (blur event). If `escape` key is pressed while the input field is focused, the value is reset to the value in the current model. Name: Other data: user.name = user.data = angular.module('optionsExample', []) .controller('ExampleController', ['$scope', function($scope) { $scope.user = { name: 'John', data: '' }; $scope.cancel = function(e) { if (e.keyCode == 27) { $scope.userForm.userName.$rollbackViewValue(); } }; }]); var model = element(by.binding('user.name')); var input = element(by.model('user.name')); var other = element(by.model('user.data')); it('should allow custom events', function() { input.sendKeys(' Doe'); input.click(); expect(model.getText()).toEqual('John'); other.click(); expect(model.getText()).toEqual('John Doe'); }); it('should $rollbackViewValue when model changes', function() { input.sendKeys(' Doe'); expect(input.getAttribute('value')).toEqual('John Doe'); input.sendKeys(protractor.Key.ESCAPE); expect(input.getAttribute('value')).toEqual('John'); other.click(); expect(model.getText()).toEqual('John'); }); This one shows how to debounce model changes. Model will be updated only 1 sec after last change. If the `Clear` button is pressed, any debounced action is canceled and the value becomes empty. Name: Clear user.name = angular.module('optionsExample', []) .controller('ExampleController', ['$scope', function($scope) { $scope.user = { name: 'Igor' }; }]); This one shows how to bind to getter/setters: Name: user.name = angular.module('getterSetterExample', []) .controller('ExampleController', ['$scope', function($scope) { var _name = 'Brian'; $scope.user = { name: function(newName) { // Note that newName can be undefined for two reasons: // 1. Because it is called as a getter and thus called with no arguments // 2. Because the property should actually be set to undefined. This happens e.g. if the // input is invalid return arguments.length ? (_name = newName) : _name; } }; }]); */ var ngModelOptionsDirective = function() { return { restrict: 'A', controller: ['$scope', '$attrs', function($scope, $attrs) { var that = this; this.$options = copy($scope.$eval($attrs.ngModelOptions)); // Allow adding/overriding bound events if (isDefined(this.$options.updateOn)) { this.$options.updateOnDefault = false; // extract "default" pseudo-event from list of events that can trigger a model update this.$options.updateOn = trim(this.$options.updateOn.replace(DEFAULT_REGEXP, function() { that.$options.updateOnDefault = true; return ' '; })); } else { this.$options.updateOnDefault = true; } }] }; }; // helper methods function addSetValidityMethod(context) { var ctrl = context.ctrl, $element = context.$element, classCache = {}, set = context.set, unset = context.unset, $animate = context.$animate; classCache[INVALID_CLASS] = !(classCache[VALID_CLASS] = $element.hasClass(VALID_CLASS)); ctrl.$setValidity = setValidity; function setValidity(validationErrorKey, state, controller) { if (isUndefined(state)) { createAndSet('$pending', validationErrorKey, controller); } else { unsetAndCleanup('$pending', validationErrorKey, controller); } if (!isBoolean(state)) { unset(ctrl.$error, validationErrorKey, controller); unset(ctrl.$$success, validationErrorKey, controller); } else { if (state) { unset(ctrl.$error, validationErrorKey, controller); set(ctrl.$$success, validationErrorKey, controller); } else { set(ctrl.$error, validationErrorKey, controller); unset(ctrl.$$success, validationErrorKey, controller); } } if (ctrl.$pending) { cachedToggleClass(PENDING_CLASS, true); ctrl.$valid = ctrl.$invalid = undefined; toggleValidationCss('', null); } else { cachedToggleClass(PENDING_CLASS, false); ctrl.$valid = isObjectEmpty(ctrl.$error); ctrl.$invalid = !ctrl.$valid; toggleValidationCss('', ctrl.$valid); } // re-read the state as the set/unset methods could have // combined state in ctrl.$error[validationError] (used for forms), // where setting/unsetting only increments/decrements the value, // and does not replace it. var combinedState; if (ctrl.$pending && ctrl.$pending[validationErrorKey]) { combinedState = undefined; } else if (ctrl.$error[validationErrorKey]) { combinedState = false; } else if (ctrl.$$success[validationErrorKey]) { combinedState = true; } else { combinedState = null; } toggleValidationCss(validationErrorKey, combinedState); ctrl.$$parentForm.$setValidity(validationErrorKey, combinedState, ctrl); } function createAndSet(name, value, controller) { if (!ctrl[name]) { ctrl[name] = {}; } set(ctrl[name], value, controller); } function unsetAndCleanup(name, value, controller) { if (ctrl[name]) { unset(ctrl[name], value, controller); } if (isObjectEmpty(ctrl[name])) { ctrl[name] = undefined; } } function cachedToggleClass(className, switchValue) { if (switchValue && !classCache[className]) { $animate.addClass($element, className); classCache[className] = true; } else if (!switchValue && classCache[className]) { $animate.removeClass($element, className); classCache[className] = false; } } function toggleValidationCss(validationErrorKey, isValid) { validationErrorKey = validationErrorKey ? '-' + snake_case(validationErrorKey, '-') : ''; cachedToggleClass(VALID_CLASS + validationErrorKey, isValid === true); cachedToggleClass(INVALID_CLASS + validationErrorKey, isValid === false); } } function isObjectEmpty(obj) { if (obj) { for (var prop in obj) { if (obj.hasOwnProperty(prop)) { return false; } } } return true; } /** * @ngdoc directive * @name ngNonBindable * @restrict AC * @priority 1000 * * @description * The `ngNonBindable` directive tells Angular not to compile or bind the contents of the current * DOM element. This is useful if the element contains what appears to be Angular directives and * bindings but which should be ignored by Angular. This could be the case if you have a site that * displays snippets of code, for instance. * * @element ANY * * @example * In this example there are two locations where a simple interpolation binding (`{{}}`) is present, * but the one wrapped in `ngNonBindable` is left alone. * * @example Normal: {{1 + 2}} Ignored: {{1 + 2}} it('should check ng-non-bindable', function() { expect(element(by.binding('1 + 2')).getText()).toContain('3'); expect(element.all(by.css('div')).last().getText()).toMatch(/1 \+ 2/); }); */ var ngNonBindableDirective = ngDirective({ terminal: true, priority: 1000 }); /* global jqLiteRemove */ var ngOptionsMinErr = minErr('ngOptions'); /** * @ngdoc directive * @name ngOptions * @restrict A * * @description * * The `ngOptions` attribute can be used to dynamically generate a list of `` * elements for the `` element using the array or object obtained by evaluating the * `ngOptions` comprehension expression. * * In many cases, `ngRepeat` can be used on `` elements instead of `ngOptions` to achieve a * similar result. However, `ngOptions` provides some benefits such as reducing memory and * increasing speed by not creating a new scope for each repeated instance, as well as providing * more flexibility in how the ``'s model is assigned via the `select` **`as`** part of the * comprehension expression. `ngOptions` should be used when the `` model needs to be bound * to a non-string value. This is because an option element can only be bound to string values at * present. * * When an item in the `` menu is selected, the array element or object property * represented by the selected option will be bound to the model identified by the `ngModel` * directive. * * Optionally, a single hard-coded `` element, with the value set to an empty string, can * be nested into the `` element. This element will then represent the `null` or "not selected" * option. See example below for demonstration. * * ## Complex Models (objects or collections) * * By default, `ngModel` watches the model by reference, not value. This is important to know when * binding the select to a model that is an object or a collection. * * One issue occurs if you want to preselect an option. For example, if you set * the model to an object that is equal to an object in your collection, `ngOptions` won't be able to set the selection, * because the objects are not identical. So by default, you should always reference the item in your collection * for preselections, e.g.: `$scope.selected = $scope.collection[3]`. * * Another solution is to use a `track by` clause, because then `ngOptions` will track the identity * of the item not by reference, but by the result of the `track by` expression. For example, if your * collection items have an id property, you would `track by item.id`. * * A different issue with objects or collections is that ngModel won't detect if an object property or * a collection item changes. For that reason, `ngOptions` additionally watches the model using * `$watchCollection`, when the expression contains a `track by` clause or the the select has the `multiple` attribute. * This allows ngOptions to trigger a re-rendering of the options even if the actual object/collection * has not changed identity, but only a property on the object or an item in the collection changes. * * Note that `$watchCollection` does a shallow comparison of the properties of the object (or the items in the collection * if the model is an array). This means that changing a property deeper than the first level inside the * object/collection will not trigger a re-rendering. * * ## `select` **`as`** * * Using `select` **`as`** will bind the result of the `select` expression to the model, but * the value of the `` and `` html elements will be either the index (for array data sources) * or property name (for object data sources) of the value within the collection. If a **`track by`** expression * is used, the result of that expression will be set as the value of the `option` and `select` elements. * * * ### `select` **`as`** and **`track by`** * * * Be careful when using `select` **`as`** and **`track by`** in the same expression. * * * Given this array of items on the $scope: * * ```js * $scope.items = [{ * id: 1, * label: 'aLabel', * subItem: { name: 'aSubItem' } * }, { * id: 2, * label: 'bLabel', * subItem: { name: 'bSubItem' } * }]; * ``` * * This will work: * * ```html * * ``` * ```js * $scope.selected = $scope.items[0]; * ``` * * but this will not work: * * ```html * * ``` * ```js * $scope.selected = $scope.items[0].subItem; * ``` * * In both examples, the **`track by`** expression is applied successfully to each `item` in the * `items` array. Because the selected option has been set programmatically in the controller, the * **`track by`** expression is also applied to the `ngModel` value. In the first example, the * `ngModel` value is `items[0]` and the **`track by`** expression evaluates to `items[0].id` with * no issue. In the second example, the `ngModel` value is `items[0].subItem` and the **`track by`** * expression evaluates to `items[0].subItem.id` (which is undefined). As a result, the model value * is not matched against any `` and the `` appears as having no selected value. * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} required The control is considered valid only if value is entered. * @param {string=} ngRequired Adds `required` attribute and `required` validation constraint to * the element when the ngRequired expression evaluates to true. Use `ngRequired` instead of * `required` when you want to data-bind to the `required` attribute. * @param {comprehension_expression=} ngOptions in one of the following forms: * * * for array data sources: * * `label` **`for`** `value` **`in`** `array` * * `select` **`as`** `label` **`for`** `value` **`in`** `array` * * `label` **`group by`** `group` **`for`** `value` **`in`** `array` * * `label` **`disable when`** `disable` **`for`** `value` **`in`** `array` * * `label` **`group by`** `group` **`for`** `value` **`in`** `array` **`track by`** `trackexpr` * * `label` **`disable when`** `disable` **`for`** `value` **`in`** `array` **`track by`** `trackexpr` * * `label` **`for`** `value` **`in`** `array` | orderBy:`orderexpr` **`track by`** `trackexpr` * (for including a filter with `track by`) * * for object data sources: * * `label` **`for (`**`key` **`,`** `value`**`) in`** `object` * * `select` **`as`** `label` **`for (`**`key` **`,`** `value`**`) in`** `object` * * `label` **`group by`** `group` **`for (`**`key`**`,`** `value`**`) in`** `object` * * `label` **`disable when`** `disable` **`for (`**`key`**`,`** `value`**`) in`** `object` * * `select` **`as`** `label` **`group by`** `group` * **`for` `(`**`key`**`,`** `value`**`) in`** `object` * * `select` **`as`** `label` **`disable when`** `disable` * **`for` `(`**`key`**`,`** `value`**`) in`** `object` * * Where: * * * `array` / `object`: an expression which evaluates to an array / object to iterate over. * * `value`: local variable which will refer to each item in the `array` or each property value * of `object` during iteration. * * `key`: local variable which will refer to a property name in `object` during iteration. * * `label`: The result of this expression will be the label for `` element. The * `expression` will most likely refer to the `value` variable (e.g. `value.propertyName`). * * `select`: The result of this expression will be bound to the model of the parent `` * element. If not specified, `select` expression will default to `value`. * * `group`: The result of this expression will be used to group options using the `` * DOM element. * * `disable`: The result of this expression will be used to disable the rendered `` * element. Return `true` to disable. * * `trackexpr`: Used when working with an array of objects. The result of this expression will be * used to identify the objects in the array. The `trackexpr` will most likely refer to the * `value` variable (e.g. `value.propertyName`). With this the selection is preserved * even when the options are recreated (e.g. reloaded from the server). * * @example Name: Disabled? X add Color (null not allowed): Color (null allowed): -- choose color -- Color grouped by shade: Color grouped by shade, with some disabled: Select bogus. Currently selected: {{ {selected_color:myColor} }} it('should check ng-options', function() { expect(element(by.binding('{selected_color:myColor}')).getText()).toMatch('red'); element.all(by.model('myColor')).first().click(); element.all(by.css('select[ng-model="myColor"] option')).first().click(); expect(element(by.binding('{selected_color:myColor}')).getText()).toMatch('black'); element(by.css('.nullable select[ng-model="myColor"]')).click(); element.all(by.css('.nullable select[ng-model="myColor"] option')).first().click(); expect(element(by.binding('{selected_color:myColor}')).getText()).toMatch('null'); }); */ // jshint maxlen: false // //00001111111111000000000002222222222000000000000000000000333333333300000000000000000000000004444444444400000000000005555555555555550000000006666666666666660000000777777777777777000000000000000888888888800000000000000000009999999999 var NG_OPTIONS_REGEXP = /^\s*([\s\S]+?)(?:\s+as\s+([\s\S]+?))?(?:\s+group\s+by\s+([\s\S]+?))?(?:\s+disable\s+when\s+([\s\S]+?))?\s+for\s+(?:([\$\w][\$\w]*)|(?:\(\s*([\$\w][\$\w]*)\s*,\s*([\$\w][\$\w]*)\s*\)))\s+in\s+([\s\S]+?)(?:\s+track\s+by\s+([\s\S]+?))?$/; // 1: value expression (valueFn) // 2: label expression (displayFn) // 3: group by expression (groupByFn) // 4: disable when expression (disableWhenFn) // 5: array item variable name // 6: object item key variable name // 7: object item value variable name // 8: collection expression // 9: track by expression // jshint maxlen: 100 var ngOptionsDirective = ['$compile', '$document', '$parse', function($compile, $document, $parse) { function parseOptionsExpression(optionsExp, selectElement, scope) { var match = optionsExp.match(NG_OPTIONS_REGEXP); if (!(match)) { throw ngOptionsMinErr('iexp', "Expected expression in form of " + "'_select_ (as _label_)? for (_key_,)?_value_ in _collection_'" + " but got '{0}'. Element: {1}", optionsExp, startingTag(selectElement)); } // Extract the parts from the ngOptions expression // The variable name for the value of the item in the collection var valueName = match[5] || match[7]; // The variable name for the key of the item in the collection var keyName = match[6]; // An expression that generates the viewValue for an option if there is a label expression var selectAs = / as /.test(match[0]) && match[1]; // An expression that is used to track the id of each object in the options collection var trackBy = match[9]; // An expression that generates the viewValue for an option if there is no label expression var valueFn = $parse(match[2] ? match[1] : valueName); var selectAsFn = selectAs && $parse(selectAs); var viewValueFn = selectAsFn || valueFn; var trackByFn = trackBy && $parse(trackBy); // Get the value by which we are going to track the option // if we have a trackFn then use that (passing scope and locals) // otherwise just hash the given viewValue var getTrackByValueFn = trackBy ? function(value, locals) { return trackByFn(scope, locals); } : function getHashOfValue(value) { return hashKey(value); }; var getTrackByValue = function(value, key) { return getTrackByValueFn(value, getLocals(value, key)); }; var displayFn = $parse(match[2] || match[1]); var groupByFn = $parse(match[3] || ''); var disableWhenFn = $parse(match[4] || ''); var valuesFn = $parse(match[8]); var locals = {}; var getLocals = keyName ? function(value, key) { locals[keyName] = key; locals[valueName] = value; return locals; } : function(value) { locals[valueName] = value; return locals; }; function Option(selectValue, viewValue, label, group, disabled) { this.selectValue = selectValue; this.viewValue = viewValue; this.label = label; this.group = group; this.disabled = disabled; } function getOptionValuesKeys(optionValues) { var optionValuesKeys; if (!keyName && isArrayLike(optionValues)) { optionValuesKeys = optionValues; } else { // if object, extract keys, in enumeration order, unsorted optionValuesKeys = []; for (var itemKey in optionValues) { if (optionValues.hasOwnProperty(itemKey) && itemKey.charAt(0) !== '$') { optionValuesKeys.push(itemKey); } } } return optionValuesKeys; } return { trackBy: trackBy, getTrackByValue: getTrackByValue, getWatchables: $parse(valuesFn, function(optionValues) { // Create a collection of things that we would like to watch (watchedArray) // so that they can all be watched using a single $watchCollection // that only runs the handler once if anything changes var watchedArray = []; optionValues = optionValues || []; var optionValuesKeys = getOptionValuesKeys(optionValues); var optionValuesLength = optionValuesKeys.length; for (var index = 0; index < optionValuesLength; index++) { var key = (optionValues === optionValuesKeys) ? index : optionValuesKeys[index]; var value = optionValues[key]; var locals = getLocals(value, key); var selectValue = getTrackByValueFn(value, locals); watchedArray.push(selectValue); // Only need to watch the displayFn if there is a specific label expression if (match[2] || match[1]) { var label = displayFn(scope, locals); watchedArray.push(label); } // Only need to watch the disableWhenFn if there is a specific disable expression if (match[4]) { var disableWhen = disableWhenFn(scope, locals); watchedArray.push(disableWhen); } } return watchedArray; }), getOptions: function() { var optionItems = []; var selectValueMap = {}; // The option values were already computed in the `getWatchables` fn, // which must have been called to trigger `getOptions` var optionValues = valuesFn(scope) || []; var optionValuesKeys = getOptionValuesKeys(optionValues); var optionValuesLength = optionValuesKeys.length; for (var index = 0; index < optionValuesLength; index++) { var key = (optionValues === optionValuesKeys) ? index : optionValuesKeys[index]; var value = optionValues[key]; var locals = getLocals(value, key); var viewValue = viewValueFn(scope, locals); var selectValue = getTrackByValueFn(viewValue, locals); var label = displayFn(scope, locals); var group = groupByFn(scope, locals); var disabled = disableWhenFn(scope, locals); var optionItem = new Option(selectValue, viewValue, label, group, disabled); optionItems.push(optionItem); selectValueMap[selectValue] = optionItem; } return { items: optionItems, selectValueMap: selectValueMap, getOptionFromViewValue: function(value) { return selectValueMap[getTrackByValue(value)]; }, getViewValueFromOption: function(option) { // If the viewValue could be an object that may be mutated by the application, // we need to make a copy and not return the reference to the value on the option. return trackBy ? angular.copy(option.viewValue) : option.viewValue; } }; } }; } // we can't just jqLite('') since jqLite is not smart enough // to create it in and IE barfs otherwise. var optionTemplate = window.document.createElement('option'), optGroupTemplate = window.document.createElement('optgroup'); function ngOptionsPostLink(scope, selectElement, attr, ctrls) { var selectCtrl = ctrls[0]; var ngModelCtrl = ctrls[1]; var multiple = attr.multiple; // The emptyOption allows the application developer to provide their own custom "empty" // option when the viewValue does not match any of the option values. var emptyOption; for (var i = 0, children = selectElement.children(), ii = children.length; i < ii; i++) { if (children[i].value === '') { emptyOption = children.eq(i); break; } } var providedEmptyOption = !!emptyOption; var unknownOption = jqLite(optionTemplate.cloneNode(false)); unknownOption.val('?'); var options; var ngOptions = parseOptionsExpression(attr.ngOptions, selectElement, scope); // This stores the newly created options before they are appended to the select. // Since the contents are removed from the fragment when it is appended, // we only need to create it once. var listFragment = $document[0].createDocumentFragment(); var renderEmptyOption = function() { if (!providedEmptyOption) { selectElement.prepend(emptyOption); } selectElement.val(''); emptyOption.prop('selected', true); // needed for IE emptyOption.attr('selected', true); }; var removeEmptyOption = function() { if (!providedEmptyOption) { emptyOption.remove(); } }; var renderUnknownOption = function() { selectElement.prepend(unknownOption); selectElement.val('?'); unknownOption.prop('selected', true); // needed for IE unknownOption.attr('selected', true); }; var removeUnknownOption = function() { unknownOption.remove(); }; // Update the controller methods for multiple selectable options if (!multiple) { selectCtrl.writeValue = function writeNgOptionsValue(value) { var option = options.getOptionFromViewValue(value); if (option) { // Don't update the option when it is already selected. // For example, the browser will select the first option by default. In that case, // most properties are set automatically - except the `selected` attribute, which we // set always if (selectElement[0].value !== option.selectValue) { removeUnknownOption(); removeEmptyOption(); selectElement[0].value = option.selectValue; option.element.selected = true; } option.element.setAttribute('selected', 'selected'); } else { if (value === null || providedEmptyOption) { removeUnknownOption(); renderEmptyOption(); } else { removeEmptyOption(); renderUnknownOption(); } } }; selectCtrl.readValue = function readNgOptionsValue() { var selectedOption = options.selectValueMap[selectElement.val()]; if (selectedOption && !selectedOption.disabled) { removeEmptyOption(); removeUnknownOption(); return options.getViewValueFromOption(selectedOption); } return null; }; // If we are using `track by` then we must watch the tracked value on the model // since ngModel only watches for object identity change if (ngOptions.trackBy) { scope.$watch( function() { return ngOptions.getTrackByValue(ngModelCtrl.$viewValue); }, function() { ngModelCtrl.$render(); } ); } } else { ngModelCtrl.$isEmpty = function(value) { return !value || value.length === 0; }; selectCtrl.writeValue = function writeNgOptionsMultiple(value) { options.items.forEach(function(option) { option.element.selected = false; }); if (value) { value.forEach(function(item) { var option = options.getOptionFromViewValue(item); if (option) option.element.selected = true; }); } }; selectCtrl.readValue = function readNgOptionsMultiple() { var selectedValues = selectElement.val() || [], selections = []; forEach(selectedValues, function(value) { var option = options.selectValueMap[value]; if (option && !option.disabled) selections.push(options.getViewValueFromOption(option)); }); return selections; }; // If we are using `track by` then we must watch these tracked values on the model // since ngModel only watches for object identity change if (ngOptions.trackBy) { scope.$watchCollection(function() { if (isArray(ngModelCtrl.$viewValue)) { return ngModelCtrl.$viewValue.map(function(value) { return ngOptions.getTrackByValue(value); }); } }, function() { ngModelCtrl.$render(); }); } } if (providedEmptyOption) { // we need to remove it before calling selectElement.empty() because otherwise IE will // remove the label from the element. wtf? emptyOption.remove(); // compile the element since there might be bindings in it $compile(emptyOption)(scope); // remove the class, which is added automatically because we recompile the element and it // becomes the compilation root emptyOption.removeClass('ng-scope'); } else { emptyOption = jqLite(optionTemplate.cloneNode(false)); } selectElement.empty(); // We need to do this here to ensure that the options object is defined // when we first hit it in writeNgOptionsValue updateOptions(); // We will re-render the option elements if the option values or labels change scope.$watchCollection(ngOptions.getWatchables, updateOptions); // ------------------------------------------------------------------ // function addOptionElement(option, parent) { var optionElement = optionTemplate.cloneNode(false); parent.appendChild(optionElement); updateOptionElement(option, optionElement); } function updateOptionElement(option, element) { option.element = element; element.disabled = option.disabled; // NOTE: The label must be set before the value, otherwise IE10/11/EDGE create unresponsive // selects in certain circumstances when multiple selects are next to each other and display // the option list in listbox style, i.e. the select is [multiple], or specifies a [size]. // See https://github.com/angular/angular.js/issues/11314 for more info. // This is unfortunately untestable with unit / e2e tests if (option.label !== element.label) { element.label = option.label; element.textContent = option.label; } if (option.value !== element.value) element.value = option.selectValue; } function updateOptions() { var previousValue = options && selectCtrl.readValue(); // We must remove all current options, but cannot simply set innerHTML = null // since the providedEmptyOption might have an ngIf on it that inserts comments which we // must preserve. // Instead, iterate over the current option elements and remove them or their optgroup // parents if (options) { for (var i = options.items.length - 1; i >= 0; i--) { var option = options.items[i]; if (option.group) { jqLiteRemove(option.element.parentNode); } else { jqLiteRemove(option.element); } } } options = ngOptions.getOptions(); var groupElementMap = {}; // Ensure that the empty option is always there if it was explicitly provided if (providedEmptyOption) { selectElement.prepend(emptyOption); } options.items.forEach(function addOption(option) { var groupElement; if (isDefined(option.group)) { // This option is to live in a group // See if we have already created this group groupElement = groupElementMap[option.group]; if (!groupElement) { groupElement = optGroupTemplate.cloneNode(false); listFragment.appendChild(groupElement); // Update the label on the group element groupElement.label = option.group; // Store it for use later groupElementMap[option.group] = groupElement; } addOptionElement(option, groupElement); } else { // This option is not in a group addOptionElement(option, listFragment); } }); selectElement[0].appendChild(listFragment); ngModelCtrl.$render(); // Check to see if the value has changed due to the update to the options if (!ngModelCtrl.$isEmpty(previousValue)) { var nextValue = selectCtrl.readValue(); var isNotPrimitive = ngOptions.trackBy || multiple; if (isNotPrimitive ? !equals(previousValue, nextValue) : previousValue !== nextValue) { ngModelCtrl.$setViewValue(nextValue); ngModelCtrl.$render(); } } } } return { restrict: 'A', terminal: true, require: ['select', 'ngModel'], link: { pre: function ngOptionsPreLink(scope, selectElement, attr, ctrls) { // Deactivate the SelectController.register method to prevent // option directives from accidentally registering themselves // (and unwanted $destroy handlers etc.) ctrls[0].registerOption = noop; }, post: ngOptionsPostLink } }; }]; /** * @ngdoc directive * @name ngPluralize * @restrict EA * * @description * `ngPluralize` is a directive that displays messages according to en-US localization rules. * These rules are bundled with angular.js, but can be overridden * (see {@link guide/i18n Angular i18n} dev guide). You configure ngPluralize directive * by specifying the mappings between * [plural categories](http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/language_plural_rules.html) * and the strings to be displayed. * * # Plural categories and explicit number rules * There are two * [plural categories](http://unicode.org/repos/cldr-tmp/trunk/diff/supplemental/language_plural_rules.html) * in Angular's default en-US locale: "one" and "other". * * While a plural category may match many numbers (for example, in en-US locale, "other" can match * any number that is not 1), an explicit number rule can only match one number. For example, the * explicit number rule for "3" matches the number 3. There are examples of plural categories * and explicit number rules throughout the rest of this documentation. * * # Configuring ngPluralize * You configure ngPluralize by providing 2 attributes: `count` and `when`. * You can also provide an optional attribute, `offset`. * * The value of the `count` attribute can be either a string or an {@link guide/expression * Angular expression}; these are evaluated on the current scope for its bound value. * * The `when` attribute specifies the mappings between plural categories and the actual * string to be displayed. The value of the attribute should be a JSON object. * * The following example shows how to configure ngPluralize: * * ```html * * *``` * * In the example, `"0: Nobody is viewing."` is an explicit number rule. If you did not * specify this rule, 0 would be matched to the "other" category and "0 people are viewing" * would be shown instead of "Nobody is viewing". You can specify an explicit number rule for * other numbers, for example 12, so that instead of showing "12 people are viewing", you can * show "a dozen people are viewing". * * You can use a set of closed braces (`{}`) as a placeholder for the number that you want substituted * into pluralized strings. In the previous example, Angular will replace `{}` with * `{{personCount}}`. The closed braces `{}` is a placeholder * for {{numberExpression}}. * * If no rule is defined for a category, then an empty string is displayed and a warning is generated. * Note that some locales define more categories than `one` and `other`. For example, fr-fr defines `few` and `many`. * * # Configuring ngPluralize with offset * The `offset` attribute allows further customization of pluralized text, which can result in * a better user experience. For example, instead of the message "4 people are viewing this document", * you might display "John, Kate and 2 others are viewing this document". * The offset attribute allows you to offset a number by any desired value. * Let's take a look at an example: * * ```html * * * ``` * * Notice that we are still using two plural categories(one, other), but we added * three explicit number rules 0, 1 and 2. * When one person, perhaps John, views the document, "John is viewing" will be shown. * When three people view the document, no explicit number rule is found, so * an offset of 2 is taken off 3, and Angular uses 1 to decide the plural category. * In this case, plural category 'one' is matched and "John, Mary and one other person are viewing" * is shown. * * Note that when you specify offsets, you must provide explicit number rules for * numbers from 0 up to and including the offset. If you use an offset of 3, for example, * you must provide explicit number rules for 0, 1, 2 and 3. You must also provide plural strings for * plural categories "one" and "other". * * @param {string|expression} count The variable to be bound to. * @param {string} when The mapping between plural category to its corresponding strings. * @param {number=} offset Offset to deduct from the total number. * * @example Person 1: Person 2: Number of People: Without Offset: With Offset(2): it('should show correct pluralized string', function() { var withoutOffset = element.all(by.css('ng-pluralize')).get(0); var withOffset = element.all(by.css('ng-pluralize')).get(1); var countInput = element(by.model('personCount')); expect(withoutOffset.getText()).toEqual('1 person is viewing.'); expect(withOffset.getText()).toEqual('Igor is viewing.'); countInput.clear(); countInput.sendKeys('0'); expect(withoutOffset.getText()).toEqual('Nobody is viewing.'); expect(withOffset.getText()).toEqual('Nobody is viewing.'); countInput.clear(); countInput.sendKeys('2'); expect(withoutOffset.getText()).toEqual('2 people are viewing.'); expect(withOffset.getText()).toEqual('Igor and Misko are viewing.'); countInput.clear(); countInput.sendKeys('3'); expect(withoutOffset.getText()).toEqual('3 people are viewing.'); expect(withOffset.getText()).toEqual('Igor, Misko and one other person are viewing.'); countInput.clear(); countInput.sendKeys('4'); expect(withoutOffset.getText()).toEqual('4 people are viewing.'); expect(withOffset.getText()).toEqual('Igor, Misko and 2 other people are viewing.'); }); it('should show data-bound names', function() { var withOffset = element.all(by.css('ng-pluralize')).get(1); var personCount = element(by.model('personCount')); var person1 = element(by.model('person1')); var person2 = element(by.model('person2')); personCount.clear(); personCount.sendKeys('4'); person1.clear(); person1.sendKeys('Di'); person2.clear(); person2.sendKeys('Vojta'); expect(withOffset.getText()).toEqual('Di, Vojta and 2 other people are viewing.'); }); */ var ngPluralizeDirective = ['$locale', '$interpolate', '$log', function($locale, $interpolate, $log) { var BRACE = /{}/g, IS_WHEN = /^when(Minus)?(.+)$/; return { link: function(scope, element, attr) { var numberExp = attr.count, whenExp = attr.$attr.when && element.attr(attr.$attr.when), // we have {{}} in attrs offset = attr.offset || 0, whens = scope.$eval(whenExp) || {}, whensExpFns = {}, startSymbol = $interpolate.startSymbol(), endSymbol = $interpolate.endSymbol(), braceReplacement = startSymbol + numberExp + '-' + offset + endSymbol, watchRemover = angular.noop, lastCount; forEach(attr, function(expression, attributeName) { var tmpMatch = IS_WHEN.exec(attributeName); if (tmpMatch) { var whenKey = (tmpMatch[1] ? '-' : '') + lowercase(tmpMatch[2]); whens[whenKey] = element.attr(attr.$attr[attributeName]); } }); forEach(whens, function(expression, key) { whensExpFns[key] = $interpolate(expression.replace(BRACE, braceReplacement)); }); scope.$watch(numberExp, function ngPluralizeWatchAction(newVal) { var count = parseFloat(newVal); var countIsNaN = isNaN(count); if (!countIsNaN && !(count in whens)) { // If an explicit number rule such as 1, 2, 3... is defined, just use it. // Otherwise, check it against pluralization rules in $locale service. count = $locale.pluralCat(count - offset); } // If both `count` and `lastCount` are NaN, we don't need to re-register a watch. // In JS `NaN !== NaN`, so we have to explicitly check. if ((count !== lastCount) && !(countIsNaN && isNumber(lastCount) && isNaN(lastCount))) { watchRemover(); var whenExpFn = whensExpFns[count]; if (isUndefined(whenExpFn)) { if (newVal != null) { $log.debug("ngPluralize: no rule defined for '" + count + "' in " + whenExp); } watchRemover = noop; updateElementText(); } else { watchRemover = scope.$watch(whenExpFn, updateElementText); } lastCount = count; } }); function updateElementText(newText) { element.text(newText || ''); } } }; }]; /** * @ngdoc directive * @name ngRepeat * @multiElement * * @description * The `ngRepeat` directive instantiates a template once per item from a collection. Each template * instance gets its own scope, where the given loop variable is set to the current collection item, * and `$index` is set to the item index or key. * * Special properties are exposed on the local scope of each template instance, including: * * | Variable | Type | Details | * |-----------|-----------------|-----------------------------------------------------------------------------| * | `$index` | {@type number} | iterator offset of the repeated element (0..length-1) | * | `$first` | {@type boolean} | true if the repeated element is first in the iterator. | * | `$middle` | {@type boolean} | true if the repeated element is between the first and last in the iterator. | * | `$last` | {@type boolean} | true if the repeated element is last in the iterator. | * | `$even` | {@type boolean} | true if the iterator position `$index` is even (otherwise false). | * | `$odd` | {@type boolean} | true if the iterator position `$index` is odd (otherwise false). | * * * Creating aliases for these properties is possible with {@link ng.directive:ngInit `ngInit`}. * This may be useful when, for instance, nesting ngRepeats. * * * * # Iterating over object properties * * It is possible to get `ngRepeat` to iterate over the properties of an object using the following * syntax: * * ```js * ... * ``` * * However, there are a limitations compared to array iteration: * * - The JavaScript specification does not define the order of keys * returned for an object, so Angular relies on the order returned by the browser * when running `for key in myObj`. Browsers generally follow the strategy of providing * keys in the order in which they were defined, although there are exceptions when keys are deleted * and reinstated. See the * [MDN page on `delete` for more info](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Operators/delete#Cross-browser_notes). * * - `ngRepeat` will silently *ignore* object keys starting with `$`, because * it's a prefix used by Angular for public (`$`) and private (`$$`) properties. * * - The built-in filters {@link ng.orderBy orderBy} and {@link ng.filter filter} do not work with * objects, and will throw if used with one. * * If you are hitting any of these limitations, the recommended workaround is to convert your object into an array * that is sorted into the order that you prefer before providing it to `ngRepeat`. You could * do this with a filter such as [toArrayFilter](http://ngmodules.org/modules/angular-toArrayFilter) * or implement a `$watch` on the object yourself. * * * # Tracking and Duplicates * * `ngRepeat` uses {@link $rootScope.Scope#$watchCollection $watchCollection} to detect changes in * the collection. When a change happens, ngRepeat then makes the corresponding changes to the DOM: * * * When an item is added, a new instance of the template is added to the DOM. * * When an item is removed, its template instance is removed from the DOM. * * When items are reordered, their respective templates are reordered in the DOM. * * To minimize creation of DOM elements, `ngRepeat` uses a function * to "keep track" of all items in the collection and their corresponding DOM elements. * For example, if an item is added to the collection, ngRepeat will know that all other items * already have DOM elements, and will not re-render them. * * The default tracking function (which tracks items by their identity) does not allow * duplicate items in arrays. This is because when there are duplicates, it is not possible * to maintain a one-to-one mapping between collection items and DOM elements. * * If you do need to repeat duplicate items, you can substitute the default tracking behavior * with your own using the `track by` expression. * * For example, you may track items by the index of each item in the collection, using the * special scope property `$index`: * ```html * * {{n}} * * ``` * * You may also use arbitrary expressions in `track by`, including references to custom functions * on the scope: * ```html * * {{n}} * * ``` * * * If you are working with objects that have an identifier property, you should track * by the identifier instead of the whole object. Should you reload your data later, `ngRepeat` * will not have to rebuild the DOM elements for items it has already rendered, even if the * JavaScript objects in the collection have been substituted for new ones. For large collections, * this significantly improves rendering performance. If you don't have a unique identifier, * `track by $index` can also provide a performance boost. * * ```html * * {{model.name}} * * ``` * * When no `track by` expression is provided, it is equivalent to tracking by the built-in * `$id` function, which tracks items by their identity: * ```html * * {{obj.prop}} * * ``` * * * **Note:** `track by` must always be the last expression: * * ``` * * {{model.name}} * * ``` * * # Special repeat start and end points * To repeat a series of elements instead of just one parent element, ngRepeat (as well as other ng directives) supports extending * the range of the repeater by defining explicit start and end points by using **ng-repeat-start** and **ng-repeat-end** respectively. * The **ng-repeat-start** directive works the same as **ng-repeat**, but will repeat all the HTML code (including the tag it's defined on) * up to and including the ending HTML tag where **ng-repeat-end** is placed. * * The example below makes use of this feature: * ```html * * Header {{ item }} * * * Body {{ item }} * * * Footer {{ item }} * * ``` * * And with an input of {@type ['A','B']} for the items variable in the example above, the output will evaluate to: * ```html * * Header A * * * Body A * * * Footer A * * * Header B * * * Body B * * * Footer B * * ``` * * The custom start and end points for ngRepeat also support all other HTML directive syntax flavors provided in AngularJS (such * as **data-ng-repeat-start**, **x-ng-repeat-start** and **ng:repeat-start**). * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link ng.$animate#enter enter} | when a new item is added to the list or when an item is revealed after a filter | * | {@link ng.$animate#leave leave} | when an item is removed from the list or when an item is filtered out | * | {@link ng.$animate#move move } | when an adjacent item is filtered out causing a reorder or when the item contents are reordered | * * See the example below for defining CSS animations with ngRepeat. * * @element ANY * @scope * @priority 1000 * @param {repeat_expression} ngRepeat The expression indicating how to enumerate a collection. These * formats are currently supported: * * * `variable in expression` – where variable is the user defined loop variable and `expression` * is a scope expression giving the collection to enumerate. * * For example: `album in artist.albums`. * * * `(key, value) in expression` – where `key` and `value` can be any user defined identifiers, * and `expression` is the scope expression giving the collection to enumerate. * * For example: `(name, age) in {'adam':10, 'amalie':12}`. * * * `variable in expression track by tracking_expression` – You can also provide an optional tracking expression * which can be used to associate the objects in the collection with the DOM elements. If no tracking expression * is specified, ng-repeat associates elements by identity. It is an error to have * more than one tracking expression value resolve to the same key. (This would mean that two distinct objects are * mapped to the same DOM element, which is not possible.) * * Note that the tracking expression must come last, after any filters, and the alias expression. * * For example: `item in items` is equivalent to `item in items track by $id(item)`. This implies that the DOM elements * will be associated by item identity in the array. * * For example: `item in items track by $id(item)`. A built in `$id()` function can be used to assign a unique * `$$hashKey` property to each item in the array. This property is then used as a key to associated DOM elements * with the corresponding item in the array by identity. Moving the same object in array would move the DOM * element in the same way in the DOM. * * For example: `item in items track by item.id` is a typical pattern when the items come from the database. In this * case the object identity does not matter. Two objects are considered equivalent as long as their `id` * property is same. * * For example: `item in items | filter:searchText track by item.id` is a pattern that might be used to apply a filter * to items in conjunction with a tracking expression. * * * `variable in expression as alias_expression` – You can also provide an optional alias expression which will then store the * intermediate results of the repeater after the filters have been applied. Typically this is used to render a special message * when a filter is active on the repeater, but the filtered result set is empty. * * For example: `item in items | filter:x as results` will store the fragment of the repeated items as `results`, but only after * the items have been processed through the filter. * * Please note that `as [variable name] is not an operator but rather a part of ngRepeat micro-syntax so it can be used only at the end * (and not as operator, inside an expression). * * For example: `item in items | filter : x | orderBy : order | limitTo : limit as results` . * * @example * This example uses `ngRepeat` to display a list of people. A filter is used to restrict the displayed * results by name. New (entering) and removed (leaving) items are animated. I have {{friends.length}} friends. They are: [{{$index + 1}}] {{friend.name}} who is {{friend.age}} years old. No results found... angular.module('ngRepeat', ['ngAnimate']).controller('repeatController', function($scope) { $scope.friends = [ {name:'John', age:25, gender:'boy'}, {name:'Jessie', age:30, gender:'girl'}, {name:'Johanna', age:28, gender:'girl'}, {name:'Joy', age:15, gender:'girl'}, {name:'Mary', age:28, gender:'girl'}, {name:'Peter', age:95, gender:'boy'}, {name:'Sebastian', age:50, gender:'boy'}, {name:'Erika', age:27, gender:'girl'}, {name:'Patrick', age:40, gender:'boy'}, {name:'Samantha', age:60, gender:'girl'} ]; }); .example-animate-container { background:white; border:1px solid black; list-style:none; margin:0; padding:0 10px; } .animate-repeat { line-height:30px; list-style:none; box-sizing:border-box; } .animate-repeat.ng-move, .animate-repeat.ng-enter, .animate-repeat.ng-leave { transition:all linear 0.5s; } .animate-repeat.ng-leave.ng-leave-active, .animate-repeat.ng-move, .animate-repeat.ng-enter { opacity:0; max-height:0; } .animate-repeat.ng-leave, .animate-repeat.ng-move.ng-move-active, .animate-repeat.ng-enter.ng-enter-active { opacity:1; max-height:30px; } var friends = element.all(by.repeater('friend in friends')); it('should render initial data set', function() { expect(friends.count()).toBe(10); expect(friends.get(0).getText()).toEqual('[1] John who is 25 years old.'); expect(friends.get(1).getText()).toEqual('[2] Jessie who is 30 years old.'); expect(friends.last().getText()).toEqual('[10] Samantha who is 60 years old.'); expect(element(by.binding('friends.length')).getText()) .toMatch("I have 10 friends. They are:"); }); it('should update repeater when filter predicate changes', function() { expect(friends.count()).toBe(10); element(by.model('q')).sendKeys('ma'); expect(friends.count()).toBe(2); expect(friends.get(0).getText()).toEqual('[1] Mary who is 28 years old.'); expect(friends.last().getText()).toEqual('[2] Samantha who is 60 years old.'); }); */ var ngRepeatDirective = ['$parse', '$animate', '$compile', function($parse, $animate, $compile) { var NG_REMOVED = '$$NG_REMOVED'; var ngRepeatMinErr = minErr('ngRepeat'); var updateScope = function(scope, index, valueIdentifier, value, keyIdentifier, key, arrayLength) { // TODO(perf): generate setters to shave off ~40ms or 1-1.5% scope[valueIdentifier] = value; if (keyIdentifier) scope[keyIdentifier] = key; scope.$index = index; scope.$first = (index === 0); scope.$last = (index === (arrayLength - 1)); scope.$middle = !(scope.$first || scope.$last); // jshint bitwise: false scope.$odd = !(scope.$even = (index&1) === 0); // jshint bitwise: true }; var getBlockStart = function(block) { return block.clone[0]; }; var getBlockEnd = function(block) { return block.clone[block.clone.length - 1]; }; return { restrict: 'A', multiElement: true, transclude: 'element', priority: 1000, terminal: true, $$tlb: true, compile: function ngRepeatCompile($element, $attr) { var expression = $attr.ngRepeat; var ngRepeatEndComment = $compile.$$createComment('end ngRepeat', expression); var match = expression.match(/^\s*([\s\S]+?)\s+in\s+([\s\S]+?)(?:\s+as\s+([\s\S]+?))?(?:\s+track\s+by\s+([\s\S]+?))?\s*$/); if (!match) { throw ngRepeatMinErr('iexp', "Expected expression in form of '_item_ in _collection_[ track by _id_]' but got '{0}'.", expression); } var lhs = match[1]; var rhs = match[2]; var aliasAs = match[3]; var trackByExp = match[4]; match = lhs.match(/^(?:(\s*[\$\w]+)|\(\s*([\$\w]+)\s*,\s*([\$\w]+)\s*\))$/); if (!match) { throw ngRepeatMinErr('iidexp', "'_item_' in '_item_ in _collection_' should be an identifier or '(_key_, _value_)' expression, but got '{0}'.", lhs); } var valueIdentifier = match[3] || match[1]; var keyIdentifier = match[2]; if (aliasAs && (!/^[$a-zA-Z_][$a-zA-Z0-9_]*$/.test(aliasAs) || /^(null|undefined|this|\$index|\$first|\$middle|\$last|\$even|\$odd|\$parent|\$root|\$id)$/.test(aliasAs))) { throw ngRepeatMinErr('badident', "alias '{0}' is invalid --- must be a valid JS identifier which is not a reserved name.", aliasAs); } var trackByExpGetter, trackByIdExpFn, trackByIdArrayFn, trackByIdObjFn; var hashFnLocals = {$id: hashKey}; if (trackByExp) { trackByExpGetter = $parse(trackByExp); } else { trackByIdArrayFn = function(key, value) { return hashKey(value); }; trackByIdObjFn = function(key) { return key; }; } return function ngRepeatLink($scope, $element, $attr, ctrl, $transclude) { if (trackByExpGetter) { trackByIdExpFn = function(key, value, index) { // assign key, value, and $index to the locals so that they can be used in hash functions if (keyIdentifier) hashFnLocals[keyIdentifier] = key; hashFnLocals[valueIdentifier] = value; hashFnLocals.$index = index; return trackByExpGetter($scope, hashFnLocals); }; } // Store a list of elements from previous run. This is a hash where key is the item from the // iterator, and the value is objects with following properties. // - scope: bound scope // - element: previous element. // - index: position // // We are using no-proto object so that we don't need to guard against inherited props via // hasOwnProperty. var lastBlockMap = createMap(); //watch props $scope.$watchCollection(rhs, function ngRepeatAction(collection) { var index, length, previousNode = $element[0], // node that cloned nodes should be inserted after // initialized to the comment node anchor nextNode, // Same as lastBlockMap but it has the current state. It will become the // lastBlockMap on the next iteration. nextBlockMap = createMap(), collectionLength, key, value, // key/value of iteration trackById, trackByIdFn, collectionKeys, block, // last object information {scope, element, id} nextBlockOrder, elementsToRemove; if (aliasAs) { $scope[aliasAs] = collection; } if (isArrayLike(collection)) { collectionKeys = collection; trackByIdFn = trackByIdExpFn || trackByIdArrayFn; } else { trackByIdFn = trackByIdExpFn || trackByIdObjFn; // if object, extract keys, in enumeration order, unsorted collectionKeys = []; for (var itemKey in collection) { if (hasOwnProperty.call(collection, itemKey) && itemKey.charAt(0) !== '$') { collectionKeys.push(itemKey); } } } collectionLength = collectionKeys.length; nextBlockOrder = new Array(collectionLength); // locate existing items for (index = 0; index < collectionLength; index++) { key = (collection === collectionKeys) ? index : collectionKeys[index]; value = collection[key]; trackById = trackByIdFn(key, value, index); if (lastBlockMap[trackById]) { // found previously seen block block = lastBlockMap[trackById]; delete lastBlockMap[trackById]; nextBlockMap[trackById] = block; nextBlockOrder[index] = block; } else if (nextBlockMap[trackById]) { // if collision detected. restore lastBlockMap and throw an error forEach(nextBlockOrder, function(block) { if (block && block.scope) lastBlockMap[block.id] = block; }); throw ngRepeatMinErr('dupes', "Duplicates in a repeater are not allowed. Use 'track by' expression to specify unique keys. Repeater: {0}, Duplicate key: {1}, Duplicate value: {2}", expression, trackById, value); } else { // new never before seen block nextBlockOrder[index] = {id: trackById, scope: undefined, clone: undefined}; nextBlockMap[trackById] = true; } } // remove leftover items for (var blockKey in lastBlockMap) { block = lastBlockMap[blockKey]; elementsToRemove = getBlockNodes(block.clone); $animate.leave(elementsToRemove); if (elementsToRemove[0].parentNode) { // if the element was not removed yet because of pending animation, mark it as deleted // so that we can ignore it later for (index = 0, length = elementsToRemove.length; index < length; index++) { elementsToRemove[index][NG_REMOVED] = true; } } block.scope.$destroy(); } // we are not using forEach for perf reasons (trying to avoid #call) for (index = 0; index < collectionLength; index++) { key = (collection === collectionKeys) ? index : collectionKeys[index]; value = collection[key]; block = nextBlockOrder[index]; if (block.scope) { // if we have already seen this object, then we need to reuse the // associated scope/element nextNode = previousNode; // skip nodes that are already pending removal via leave animation do { nextNode = nextNode.nextSibling; } while (nextNode && nextNode[NG_REMOVED]); if (getBlockStart(block) != nextNode) { // existing item which got moved $animate.move(getBlockNodes(block.clone), null, previousNode); } previousNode = getBlockEnd(block); updateScope(block.scope, index, valueIdentifier, value, keyIdentifier, key, collectionLength); } else { // new item which we don't know about $transclude(function ngRepeatTransclude(clone, scope) { block.scope = scope; // http://jsperf.com/clone-vs-createcomment var endNode = ngRepeatEndComment.cloneNode(false); clone[clone.length++] = endNode; $animate.enter(clone, null, previousNode); previousNode = endNode; // Note: We only need the first/last node of the cloned nodes. // However, we need to keep the reference to the jqlite wrapper as it might be changed later // by a directive with templateUrl when its template arrives. block.clone = clone; nextBlockMap[block.id] = block; updateScope(block.scope, index, valueIdentifier, value, keyIdentifier, key, collectionLength); }); } } lastBlockMap = nextBlockMap; }); }; } }; }]; var NG_HIDE_CLASS = 'ng-hide'; var NG_HIDE_IN_PROGRESS_CLASS = 'ng-hide-animate'; /** * @ngdoc directive * @name ngShow * @multiElement * * @description * The `ngShow` directive shows or hides the given HTML element based on the expression * provided to the `ngShow` attribute. The element is shown or hidden by removing or adding * the `.ng-hide` CSS class onto the element. The `.ng-hide` CSS class is predefined * in AngularJS and sets the display style to none (using an !important flag). * For CSP mode please add `angular-csp.css` to your html file (see {@link ng.directive:ngCsp ngCsp}). * * ```html * * * * * * ``` * * When the `ngShow` expression evaluates to a falsy value then the `.ng-hide` CSS class is added to the class * attribute on the element causing it to become hidden. When truthy, the `.ng-hide` CSS class is removed * from the element causing the element not to appear hidden. * * ## Why is !important used? * * You may be wondering why !important is used for the `.ng-hide` CSS class. This is because the `.ng-hide` selector * can be easily overridden by heavier selectors. For example, something as simple * as changing the display style on a HTML list item would make hidden elements appear visible. * This also becomes a bigger issue when dealing with CSS frameworks. * * By using !important, the show and hide behavior will work as expected despite any clash between CSS selector * specificity (when !important isn't used with any conflicting styles). If a developer chooses to override the * styling to change how to hide an element then it is just a matter of using !important in their own CSS code. * * ### Overriding `.ng-hide` * * By default, the `.ng-hide` class will style the element with `display: none!important`. If you wish to change * the hide behavior with ngShow/ngHide then this can be achieved by restating the styles for the `.ng-hide` * class CSS. Note that the selector that needs to be used is actually `.ng-hide:not(.ng-hide-animate)` to cope * with extra animation classes that can be added. * * ```css * .ng-hide:not(.ng-hide-animate) { * /* this is just another form of hiding an element */ * display: block!important; * position: absolute; * top: -9999px; * left: -9999px; * } * ``` * * By default you don't need to override in CSS anything and the animations will work around the display style. * * ## A note about animations with `ngShow` * * Animations in ngShow/ngHide work with the show and hide events that are triggered when the directive expression * is true and false. This system works like the animation system present with ngClass except that * you must also include the !important flag to override the display property * so that you can perform an animation when the element is hidden during the time of the animation. * * ```css * // * //a working example can be found at the bottom of this page * // * .my-element.ng-hide-add, .my-element.ng-hide-remove { * /* this is required as of 1.3x to properly * apply all styling in a show/hide animation */ * transition: 0s linear all; * } * * .my-element.ng-hide-add-active, * .my-element.ng-hide-remove-active { * /* the transition is defined in the active class */ * transition: 1s linear all; * } * * .my-element.ng-hide-add { ... } * .my-element.ng-hide-add.ng-hide-add-active { ... } * .my-element.ng-hide-remove { ... } * .my-element.ng-hide-remove.ng-hide-remove-active { ... } * ``` * * Keep in mind that, as of AngularJS version 1.3, there is no need to change the display * property to block during animation states--ngAnimate will handle the style toggling automatically for you. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link $animate#addClass addClass} `.ng-hide` | after the `ngShow` expression evaluates to a non truthy value and just before the contents are set to hidden | * | {@link $animate#removeClass removeClass} `.ng-hide` | after the `ngShow` expression evaluates to a truthy value and just before contents are set to visible | * * @element ANY * @param {expression} ngShow If the {@link guide/expression expression} is truthy * then the element is shown or hidden respectively. * * @example Click me: Show: I show up when your checkbox is checked. Hide: I hide when your checkbox is checked. @import url(../../components/bootstrap-3.1.1/css/bootstrap.css); .animate-show { line-height: 20px; opacity: 1; padding: 10px; border: 1px solid black; background: white; } .animate-show.ng-hide-add, .animate-show.ng-hide-remove { transition: all linear 0.5s; } .animate-show.ng-hide { line-height: 0; opacity: 0; padding: 0 10px; } .check-element { padding: 10px; border: 1px solid black; background: white; } var thumbsUp = element(by.css('span.glyphicon-thumbs-up')); var thumbsDown = element(by.css('span.glyphicon-thumbs-down')); it('should check ng-show / ng-hide', function() { expect(thumbsUp.isDisplayed()).toBeFalsy(); expect(thumbsDown.isDisplayed()).toBeTruthy(); element(by.model('checked')).click(); expect(thumbsUp.isDisplayed()).toBeTruthy(); expect(thumbsDown.isDisplayed()).toBeFalsy(); }); */ var ngShowDirective = ['$animate', function($animate) { return { restrict: 'A', multiElement: true, link: function(scope, element, attr) { scope.$watch(attr.ngShow, function ngShowWatchAction(value) { // we're adding a temporary, animation-specific class for ng-hide since this way // we can control when the element is actually displayed on screen without having // to have a global/greedy CSS selector that breaks when other animations are run. // Read: https://github.com/angular/angular.js/issues/9103#issuecomment-58335845 $animate[value ? 'removeClass' : 'addClass'](element, NG_HIDE_CLASS, { tempClasses: NG_HIDE_IN_PROGRESS_CLASS }); }); } }; }]; /** * @ngdoc directive * @name ngHide * @multiElement * * @description * The `ngHide` directive shows or hides the given HTML element based on the expression * provided to the `ngHide` attribute. The element is shown or hidden by removing or adding * the `ng-hide` CSS class onto the element. The `.ng-hide` CSS class is predefined * in AngularJS and sets the display style to none (using an !important flag). * For CSP mode please add `angular-csp.css` to your html file (see {@link ng.directive:ngCsp ngCsp}). * * ```html * * * * * * ``` * * When the `ngHide` expression evaluates to a truthy value then the `.ng-hide` CSS class is added to the class * attribute on the element causing it to become hidden. When falsy, the `.ng-hide` CSS class is removed * from the element causing the element not to appear hidden. * * ## Why is !important used? * * You may be wondering why !important is used for the `.ng-hide` CSS class. This is because the `.ng-hide` selector * can be easily overridden by heavier selectors. For example, something as simple * as changing the display style on a HTML list item would make hidden elements appear visible. * This also becomes a bigger issue when dealing with CSS frameworks. * * By using !important, the show and hide behavior will work as expected despite any clash between CSS selector * specificity (when !important isn't used with any conflicting styles). If a developer chooses to override the * styling to change how to hide an element then it is just a matter of using !important in their own CSS code. * * ### Overriding `.ng-hide` * * By default, the `.ng-hide` class will style the element with `display: none!important`. If you wish to change * the hide behavior with ngShow/ngHide then this can be achieved by restating the styles for the `.ng-hide` * class in CSS: * * ```css * .ng-hide { * /* this is just another form of hiding an element */ * display: block!important; * position: absolute; * top: -9999px; * left: -9999px; * } * ``` * * By default you don't need to override in CSS anything and the animations will work around the display style. * * ## A note about animations with `ngHide` * * Animations in ngShow/ngHide work with the show and hide events that are triggered when the directive expression * is true and false. This system works like the animation system present with ngClass, except that the `.ng-hide` * CSS class is added and removed for you instead of your own CSS class. * * ```css * // * //a working example can be found at the bottom of this page * // * .my-element.ng-hide-add, .my-element.ng-hide-remove { * transition: 0.5s linear all; * } * * .my-element.ng-hide-add { ... } * .my-element.ng-hide-add.ng-hide-add-active { ... } * .my-element.ng-hide-remove { ... } * .my-element.ng-hide-remove.ng-hide-remove-active { ... } * ``` * * Keep in mind that, as of AngularJS version 1.3, there is no need to change the display * property to block during animation states--ngAnimate will handle the style toggling automatically for you. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link $animate#addClass addClass} `.ng-hide` | after the `ngHide` expression evaluates to a truthy value and just before the contents are set to hidden | * | {@link $animate#removeClass removeClass} `.ng-hide` | after the `ngHide` expression evaluates to a non truthy value and just before contents are set to visible | * * * @element ANY * @param {expression} ngHide If the {@link guide/expression expression} is truthy then * the element is shown or hidden respectively. * * @example Click me: Show: I show up when your checkbox is checked. Hide: I hide when your checkbox is checked. @import url(../../components/bootstrap-3.1.1/css/bootstrap.css); .animate-hide { transition: all linear 0.5s; line-height: 20px; opacity: 1; padding: 10px; border: 1px solid black; background: white; } .animate-hide.ng-hide { line-height: 0; opacity: 0; padding: 0 10px; } .check-element { padding: 10px; border: 1px solid black; background: white; } var thumbsUp = element(by.css('span.glyphicon-thumbs-up')); var thumbsDown = element(by.css('span.glyphicon-thumbs-down')); it('should check ng-show / ng-hide', function() { expect(thumbsUp.isDisplayed()).toBeFalsy(); expect(thumbsDown.isDisplayed()).toBeTruthy(); element(by.model('checked')).click(); expect(thumbsUp.isDisplayed()).toBeTruthy(); expect(thumbsDown.isDisplayed()).toBeFalsy(); }); */ var ngHideDirective = ['$animate', function($animate) { return { restrict: 'A', multiElement: true, link: function(scope, element, attr) { scope.$watch(attr.ngHide, function ngHideWatchAction(value) { // The comment inside of the ngShowDirective explains why we add and // remove a temporary class for the show/hide animation $animate[value ? 'addClass' : 'removeClass'](element,NG_HIDE_CLASS, { tempClasses: NG_HIDE_IN_PROGRESS_CLASS }); }); } }; }]; /** * @ngdoc directive * @name ngStyle * @restrict AC * * @description * The `ngStyle` directive allows you to set CSS style on an HTML element conditionally. * * @element ANY * @param {expression} ngStyle * * {@link guide/expression Expression} which evals to an * object whose keys are CSS style names and values are corresponding values for those CSS * keys. * * Since some CSS style names are not valid keys for an object, they must be quoted. * See the 'background-color' style in the example below. * * @example Sample Text myStyle={{myStyle}} span { color: black; } var colorSpan = element(by.css('span')); it('should check ng-style', function() { expect(colorSpan.getCssValue('color')).toBe('rgba(0, 0, 0, 1)'); element(by.css('input[value=\'set color\']')).click(); expect(colorSpan.getCssValue('color')).toBe('rgba(255, 0, 0, 1)'); element(by.css('input[value=clear]')).click(); expect(colorSpan.getCssValue('color')).toBe('rgba(0, 0, 0, 1)'); }); */ var ngStyleDirective = ngDirective(function(scope, element, attr) { scope.$watch(attr.ngStyle, function ngStyleWatchAction(newStyles, oldStyles) { if (oldStyles && (newStyles !== oldStyles)) { forEach(oldStyles, function(val, style) { element.css(style, '');}); } if (newStyles) element.css(newStyles); }, true); }); /** * @ngdoc directive * @name ngSwitch * @restrict EA * * @description * The `ngSwitch` directive is used to conditionally swap DOM structure on your template based on a scope expression. * Elements within `ngSwitch` but without `ngSwitchWhen` or `ngSwitchDefault` directives will be preserved at the location * as specified in the template. * * The directive itself works similar to ngInclude, however, instead of downloading template code (or loading it * from the template cache), `ngSwitch` simply chooses one of the nested elements and makes it visible based on which element * matches the value obtained from the evaluated expression. In other words, you define a container element * (where you place the directive), place an expression on the **`on="..."` attribute** * (or the **`ng-switch="..."` attribute**), define any inner elements inside of the directive and place * a when attribute per element. The when attribute is used to inform ngSwitch which element to display when the on * expression is evaluated. If a matching expression is not found via a when attribute then an element with the default * attribute is displayed. * * * Be aware that the attribute values to match against cannot be expressions. They are interpreted * as literal string values to match against. * For example, **`ng-switch-when="someVal"`** will match against the string `"someVal"` not against the * value of the expression `$scope.someVal`. * * @animations * | Animation | Occurs | * |----------------------------------|-------------------------------------| * | {@link ng.$animate#enter enter} | after the ngSwitch contents change and the matched child element is placed inside the container | * | {@link ng.$animate#leave leave} | after the ngSwitch contents change and just before the former contents are removed from the DOM | * * @usage * * ``` * * ... * ... * ... * * ``` * * * @scope * @priority 1200 * @param {*} ngSwitch|on expression to match against ng-switch-when. * On child elements add: * * * `ngSwitchWhen`: the case statement to match against. If match then this * case will be displayed. If the same match appears multiple times, all the * elements will be displayed. * * `ngSwitchDefault`: the default case when no other case match. If there * are multiple default cases, all of them will be displayed when no other * case match. * * * @example selection={{selection}} Settings Div Home Span default angular.module('switchExample', ['ngAnimate']) .controller('ExampleController', ['$scope', function($scope) { $scope.items = ['settings', 'home', 'other']; $scope.selection = $scope.items[0]; }]); .animate-switch-container { position:relative; background:white; border:1px solid black; height:40px; overflow:hidden; } .animate-switch { padding:10px; } .animate-switch.ng-animate { transition:all cubic-bezier(0.250, 0.460, 0.450, 0.940) 0.5s; position:absolute; top:0; left:0; right:0; bottom:0; } .animate-switch.ng-leave.ng-leave-active, .animate-switch.ng-enter { top:-50px; } .animate-switch.ng-leave, .animate-switch.ng-enter.ng-enter-active { top:0; } var switchElem = element(by.css('[ng-switch]')); var select = element(by.model('selection')); it('should start in settings', function() { expect(switchElem.getText()).toMatch(/Settings Div/); }); it('should change to home', function() { select.all(by.css('option')).get(1).click(); expect(switchElem.getText()).toMatch(/Home Span/); }); it('should select default', function() { select.all(by.css('option')).get(2).click(); expect(switchElem.getText()).toMatch(/default/); }); */ var ngSwitchDirective = ['$animate', '$compile', function($animate, $compile) { return { require: 'ngSwitch', // asks for $scope to fool the BC controller module controller: ['$scope', function ngSwitchController() { this.cases = {}; }], link: function(scope, element, attr, ngSwitchController) { var watchExpr = attr.ngSwitch || attr.on, selectedTranscludes = [], selectedElements = [], previousLeaveAnimations = [], selectedScopes = []; var spliceFactory = function(array, index) { return function() { array.splice(index, 1); }; }; scope.$watch(watchExpr, function ngSwitchWatchAction(value) { var i, ii; for (i = 0, ii = previousLeaveAnimations.length; i < ii; ++i) { $animate.cancel(previousLeaveAnimations[i]); } previousLeaveAnimations.length = 0; for (i = 0, ii = selectedScopes.length; i < ii; ++i) { var selected = getBlockNodes(selectedElements[i].clone); selectedScopes[i].$destroy(); var promise = previousLeaveAnimations[i] = $animate.leave(selected); promise.then(spliceFactory(previousLeaveAnimations, i)); } selectedElements.length = 0; selectedScopes.length = 0; if ((selectedTranscludes = ngSwitchController.cases['!' + value] || ngSwitchController.cases['?'])) { forEach(selectedTranscludes, function(selectedTransclude) { selectedTransclude.transclude(function(caseElement, selectedScope) { selectedScopes.push(selectedScope); var anchor = selectedTransclude.element; caseElement[caseElement.length++] = $compile.$$createComment('end ngSwitchWhen'); var block = { clone: caseElement }; selectedElements.push(block); $animate.enter(caseElement, anchor.parent(), anchor); }); }); } }); } }; }]; var ngSwitchWhenDirective = ngDirective({ transclude: 'element', priority: 1200, require: '^ngSwitch', multiElement: true, link: function(scope, element, attrs, ctrl, $transclude) { ctrl.cases['!' + attrs.ngSwitchWhen] = (ctrl.cases['!' + attrs.ngSwitchWhen] || []); ctrl.cases['!' + attrs.ngSwitchWhen].push({ transclude: $transclude, element: element }); } }); var ngSwitchDefaultDirective = ngDirective({ transclude: 'element', priority: 1200, require: '^ngSwitch', multiElement: true, link: function(scope, element, attr, ctrl, $transclude) { ctrl.cases['?'] = (ctrl.cases['?'] || []); ctrl.cases['?'].push({ transclude: $transclude, element: element }); } }); /** * @ngdoc directive * @name ngTransclude * @restrict EAC * * @description * Directive that marks the insertion point for the transcluded DOM of the nearest parent directive that uses transclusion. * * You can specify that you want to insert a named transclusion slot, instead of the default slot, by providing the slot name * as the value of the `ng-transclude` or `ng-transclude-slot` attribute. * * If the transcluded content is not empty (i.e. contains one or more DOM nodes, including whitespace text nodes), any existing * content of this element will be removed before the transcluded content is inserted. * If the transcluded content is empty, the existing content is left intact. This lets you provide fallback content in the case * that no transcluded content is provided. * * @element ANY * * @param {string} ngTransclude|ngTranscludeSlot the name of the slot to insert at this point. If this is not provided, is empty * or its value is the same as the name of the attribute then the default slot is used. * * @example * ### Basic transclusion * This example demonstrates basic transclusion of content into a component directive. * * * * * * * {{text}} * * * * it('should have transcluded', function() { * var titleElement = element(by.model('title')); * titleElement.clear(); * titleElement.sendKeys('TITLE'); * var textElement = element(by.model('text')); * textElement.clear(); * textElement.sendKeys('TEXT'); * expect(element(by.binding('title')).getText()).toEqual('TITLE'); * expect(element(by.binding('text')).getText()).toEqual('TEXT'); * }); * * * * @example * ### Transclude fallback content * This example shows how to use `NgTransclude` with fallback content, that * is displayed if no transcluded content is provided. * * * * * * * * * Button2 * * * * it('should have different transclude element content', function() { * expect(element(by.id('fallback')).getText()).toBe('Button1'); * expect(element(by.id('modified')).getText()).toBe('Button2'); * }); * * * * @example * ### Multi-slot transclusion * This example demonstrates using multi-slot transclusion in a component directive. * * * * * * * * {{title}} * {{text}} * * * * * angular.module('multiSlotTranscludeExample', []) * .directive('pane', function(){ * return { * restrict: 'E', * transclude: { * 'title': '?paneTitle', * 'body': 'paneBody', * 'footer': '?paneFooter' * }, * template: '' + * 'Fallback Title' + * '' + * 'Fallback Footer' + * '' * }; * }) * .controller('ExampleController', ['$scope', function($scope) { * $scope.title = 'Lorem Ipsum'; * $scope.link = "https://google.com"; * $scope.text = 'Neque porro quisquam est qui dolorem ipsum quia dolor...'; * }]); * * * it('should have transcluded the title and the body', function() { * var titleElement = element(by.model('title')); * titleElement.clear(); * titleElement.sendKeys('TITLE'); * var textElement = element(by.model('text')); * textElement.clear(); * textElement.sendKeys('TEXT'); * expect(element(by.css('.title')).getText()).toEqual('TITLE'); * expect(element(by.binding('text')).getText()).toEqual('TEXT'); * expect(element(by.css('.footer')).getText()).toEqual('Fallback Footer'); * }); * * */ var ngTranscludeMinErr = minErr('ngTransclude'); var ngTranscludeDirective = ngDirective({ restrict: 'EAC', link: function($scope, $element, $attrs, controller, $transclude) { if ($attrs.ngTransclude === $attrs.$attr.ngTransclude) { // If the attribute is of the form: `ng-transclude="ng-transclude"` // then treat it like the default $attrs.ngTransclude = ''; } function ngTranscludeCloneAttachFn(clone) { if (clone.length) { $element.empty(); $element.append(clone); } } if (!$transclude) { throw ngTranscludeMinErr('orphan', 'Illegal use of ngTransclude directive in the template! ' + 'No parent directive that requires a transclusion found. ' + 'Element: {0}', startingTag($element)); } // If there is no slot name defined or the slot name is not optional // then transclude the slot var slotName = $attrs.ngTransclude || $attrs.ngTranscludeSlot; $transclude(ngTranscludeCloneAttachFn, null, slotName); } }); /** * @ngdoc directive * @name script * @restrict E * * @description * Load the content of a ` Load inlined template it('should load template defined inside script tag', function() { element(by.css('#tpl-link')).click(); expect(element(by.css('#tpl-content')).getText()).toMatch(/Content of the template/); }); */ var scriptDirective = ['$templateCache', function($templateCache) { return { restrict: 'E', terminal: true, compile: function(element, attr) { if (attr.type == 'text/ng-template') { var templateUrl = attr.id, text = element[0].text; $templateCache.put(templateUrl, text); } } }; }]; var noopNgModelController = { $setViewValue: noop, $render: noop }; function chromeHack(optionElement) { // Workaround for https://code.google.com/p/chromium/issues/detail?id=381459 // Adding an element to a should // automatically select the new element if (optionElement[0].hasAttribute('selected')) { optionElement[0].selected = true; } } /** * @ngdoc type * @name select.SelectController * @description * The controller for the `` directive. This provides support for reading * and writing the selected value(s) of the control and also coordinates dynamically * added `` elements, perhaps by an `ngRepeat` directive. */ var SelectController = ['$element', '$scope', function($element, $scope) { var self = this, optionsMap = new HashMap(); // If the ngModel doesn't get provided then provide a dummy noop version to prevent errors self.ngModelCtrl = noopNgModelController; // The "unknown" option is one that is prepended to the list if the viewValue // does not match any of the options. When it is rendered the value of the unknown // option is '? XXX ?' where XXX is the hashKey of the value that is not known. // // We can't just jqLite('') since jqLite is not smart enough // to create it in and IE barfs otherwise. self.unknownOption = jqLite(window.document.createElement('option')); self.renderUnknownOption = function(val) { var unknownVal = '? ' + hashKey(val) + ' ?'; self.unknownOption.val(unknownVal); $element.prepend(self.unknownOption); $element.val(unknownVal); }; $scope.$on('$destroy', function() { // disable unknown option so that we don't do work when the whole select is being destroyed self.renderUnknownOption = noop; }); self.removeUnknownOption = function() { if (self.unknownOption.parent()) self.unknownOption.remove(); }; // Read the value of the select control, the implementation of this changes depending // upon whether the select can have multiple values and whether ngOptions is at work. self.readValue = function readSingleValue() { self.removeUnknownOption(); return $element.val(); }; // Write the value to the select control, the implementation of this changes depending // upon whether the select can have multiple values and whether ngOptions is at work. self.writeValue = function writeSingleValue(value) { if (self.hasOption(value)) { self.removeUnknownOption(); $element.val(value); if (value === '') self.emptyOption.prop('selected', true); // to make IE9 happy } else { if (value == null && self.emptyOption) { self.removeUnknownOption(); $element.val(''); } else { self.renderUnknownOption(value); } } }; // Tell the select control that an option, with the given value, has been added self.addOption = function(value, element) { // Skip comment nodes, as they only pollute the `optionsMap` if (element[0].nodeType === NODE_TYPE_COMMENT) return; assertNotHasOwnProperty(value, '"option value"'); if (value === '') { self.emptyOption = element; } var count = optionsMap.get(value) || 0; optionsMap.put(value, count + 1); self.ngModelCtrl.$render(); chromeHack(element); }; // Tell the select control that an option, with the given value, has been removed self.removeOption = function(value) { var count = optionsMap.get(value); if (count) { if (count === 1) { optionsMap.remove(value); if (value === '') { self.emptyOption = undefined; } } else { optionsMap.put(value, count - 1); } } }; // Check whether the select control has an option matching the given value self.hasOption = function(value) { return !!optionsMap.get(value); }; self.registerOption = function(optionScope, optionElement, optionAttrs, interpolateValueFn, interpolateTextFn) { if (interpolateValueFn) { // The value attribute is interpolated var oldVal; optionAttrs.$observe('value', function valueAttributeObserveAction(newVal) { if (isDefined(oldVal)) { self.removeOption(oldVal); } oldVal = newVal; self.addOption(newVal, optionElement); }); } else if (interpolateTextFn) { // The text content is interpolated optionScope.$watch(interpolateTextFn, function interpolateWatchAction(newVal, oldVal) { optionAttrs.$set('value', newVal); if (oldVal !== newVal) { self.removeOption(oldVal); } self.addOption(newVal, optionElement); }); } else { // The value attribute is static self.addOption(optionAttrs.value, optionElement); } optionElement.on('$destroy', function() { self.removeOption(optionAttrs.value); self.ngModelCtrl.$render(); }); }; }]; /** * @ngdoc directive * @name select * @restrict E * * @description * HTML `SELECT` element with angular data-binding. * * The `select` directive is used together with {@link ngModel `ngModel`} to provide data-binding * between the scope and the `` control (including setting default values). * It also handles dynamic `` elements, which can be added using the {@link ngRepeat `ngRepeat}` or * {@link ngOptions `ngOptions`} directives. * * When an item in the `` menu is selected, the value of the selected option will be bound * to the model identified by the `ngModel` directive. With static or repeated options, this is * the content of the `value` attribute or the textContent of the ``, if the value attribute is missing. * If you want dynamic value attributes, you can use interpolation inside the value attribute. * * * Note that the value of a `select` directive used without `ngOptions` is always a string. * When the model needs to be bound to a non-string value, you must either explicitly convert it * using a directive (see example below) or use `ngOptions` to specify the set of options. * This is because an option element can only be bound to string values at present. * * * If the viewValue of `ngModel` does not match any of the options, then the control * will automatically add an "unknown" option, which it then removes when the mismatch is resolved. * * Optionally, a single hard-coded `` element, with the value set to an empty string, can * be nested into the `` element. This element will then represent the `null` or "not selected" * option. See example below for demonstration. * * * In many cases, `ngRepeat` can be used on `` elements instead of {@link ng.directive:ngOptions * ngOptions} to achieve a similar result. However, `ngOptions` provides some benefits, such as * more flexibility in how the ``'s model is assigned via the `select` **`as`** part of the * comprehension expression, and additionally in reducing memory and increasing speed by not creating * a new scope for each repeated instance. * * * * @param {string} ngModel Assignable angular expression to data-bind to. * @param {string=} name Property name of the form under which the control is published. * @param {string=} multiple Allows multiple options to be selected. The selected values will be * bound to the model as an array. * @param {string=} required Sets `required` validation error key if the value is not entered. * @param {string=} ngRequired Adds required attribute and required validation constraint to * the element when the ngRequired expression evaluates to true. Use ngRequired instead of required * when you want to data-bind to the required attribute. * @param {string=} ngChange Angular expression to be executed when selected option(s) changes due to user * interaction with the select element. * @param {string=} ngOptions sets the options that the select is populated with and defines what is * set on the model on selection. See {@link ngOptions `ngOptions`}. * * @example * ### Simple `select` elements with static options * * * * * * Single select: * * Option 1 * Option 2 * * * Single select with "not selected" option and dynamic option values: * * ---Please select--- * Option 1 * Option 2 * * Force unknown option * singleSelect = {{data.singleSelect}} * * * Multiple select: * * Option 1 * Option 2 * Option 3 * * multipleSelect = {{data.multipleSelect}} * * * * * angular.module('staticSelect', []) * .controller('ExampleController', ['$scope', function($scope) { * $scope.data = { * singleSelect: null, * multipleSelect: [], * option1: 'option-1', * }; * * $scope.forceUnknownOption = function() { * $scope.data.singleSelect = 'nonsense'; * }; * }]); * * * * ### Using `ngRepeat` to generate `select` options * * * * * Repeat select: * * {{option.name}} * * * * repeatSelect = {{data.repeatSelect}} * * * * angular.module('ngrepeatSelect', []) * .controller('ExampleController', ['$scope', function($scope) { * $scope.data = { * repeatSelect: null, * availableOptions: [ * {id: '1', name: 'Option A'}, * {id: '2', name: 'Option B'}, * {id: '3', name: 'Option C'} * ], * }; * }]); * * * * * ### Using `select` with `ngOptions` and setting a default value * See the {@link ngOptions ngOptions documentation} for more `ngOptions` usage examples. * * * * * * Make a choice: * * * * option = {{data.selectedOption}} * * * * angular.module('defaultValueSelect', []) * .controller('ExampleController', ['$scope', function($scope) { * $scope.data = { * availableOptions: [ * {id: '1', name: 'Option A'}, * {id: '2', name: 'Option B'}, * {id: '3', name: 'Option C'} * ], * selectedOption: {id: '3', name: 'Option C'} //This sets the default value of the select in the ui * }; * }]); * * * * * ### Binding `select` to a non-string value via `ngModel` parsing / formatting * * * * * Zero * One * Two * * {{ model }} * * * angular.module('nonStringSelect', []) * .run(function($rootScope) { * $rootScope.model = { id: 2 }; * }) * .directive('convertToNumber', function() { * return { * require: 'ngModel', * link: function(scope, element, attrs, ngModel) { * ngModel.$parsers.push(function(val) { * return parseInt(val, 10); * }); * ngModel.$formatters.push(function(val) { * return '' + val; * }); * } * }; * }); * * * it('should initialize to model', function() { * var select = element(by.css('select')); * expect(element(by.model('model.id')).$('option:checked').getText()).toEqual('Two'); * }); * * * */ var selectDirective = function() { return { restrict: 'E', require: ['select', '?ngModel'], controller: SelectController, priority: 1, link: { pre: selectPreLink, post: selectPostLink } }; function selectPreLink(scope, element, attr, ctrls) { // if ngModel is not defined, we don't need to do anything var ngModelCtrl = ctrls[1]; if (!ngModelCtrl) return; var selectCtrl = ctrls[0]; selectCtrl.ngModelCtrl = ngModelCtrl; // When the selected item(s) changes we delegate getting the value of the select control // to the `readValue` method, which can be changed if the select can have multiple // selected values or if the options are being generated by `ngOptions` element.on('change', function() { scope.$apply(function() { ngModelCtrl.$setViewValue(selectCtrl.readValue()); }); }); // If the select allows multiple values then we need to modify how we read and write // values from and to the control; also what it means for the value to be empty and // we have to add an extra watch since ngModel doesn't work well with arrays - it // doesn't trigger rendering if only an item in the array changes. if (attr.multiple) { // Read value now needs to check each option to see if it is selected selectCtrl.readValue = function readMultipleValue() { var array = []; forEach(element.find('option'), function(option) { if (option.selected) { array.push(option.value); } }); return array; }; // Write value now needs to set the selected property of each matching option selectCtrl.writeValue = function writeMultipleValue(value) { var items = new HashMap(value); forEach(element.find('option'), function(option) { option.selected = isDefined(items.get(option.value)); }); }; // we have to do it on each watch since ngModel watches reference, but // we need to work of an array, so we need to see if anything was inserted/removed var lastView, lastViewRef = NaN; scope.$watch(function selectMultipleWatch() { if (lastViewRef === ngModelCtrl.$viewValue && !equals(lastView, ngModelCtrl.$viewValue)) { lastView = shallowCopy(ngModelCtrl.$viewValue); ngModelCtrl.$render(); } lastViewRef = ngModelCtrl.$viewValue; }); // If we are a multiple select then value is now a collection // so the meaning of $isEmpty changes ngModelCtrl.$isEmpty = function(value) { return !value || value.length === 0; }; } } function selectPostLink(scope, element, attrs, ctrls) { // if ngModel is not defined, we don't need to do anything var ngModelCtrl = ctrls[1]; if (!ngModelCtrl) return; var selectCtrl = ctrls[0]; // We delegate rendering to the `writeValue` method, which can be changed // if the select can have multiple selected values or if the options are being // generated by `ngOptions`. // This must be done in the postLink fn to prevent $render to be called before // all nodes have been linked correctly. ngModelCtrl.$render = function() { selectCtrl.writeValue(ngModelCtrl.$viewValue); }; } }; // The option directive is purely designed to communicate the existence (or lack of) // of dynamically created (and destroyed) option elements to their containing select // directive via its controller. var optionDirective = ['$interpolate', function($interpolate) { return { restrict: 'E', priority: 100, compile: function(element, attr) { if (isDefined(attr.value)) { // If the value attribute is defined, check if it contains an interpolation var interpolateValueFn = $interpolate(attr.value, true); } else { // If the value attribute is not defined then we fall back to the // text content of the option element, which may be interpolated var interpolateTextFn = $interpolate(element.text(), true); if (!interpolateTextFn) { attr.$set('value', element.text()); } } return function(scope, element, attr) { // This is an optimization over using ^^ since we don't want to have to search // all the way to the root of the DOM for every single option element var selectCtrlName = '$selectController', parent = element.parent(), selectCtrl = parent.data(selectCtrlName) || parent.parent().data(selectCtrlName); // in case we are in optgroup if (selectCtrl) { selectCtrl.registerOption(scope, element, attr, interpolateValueFn, interpolateTextFn); } }; } }; }]; var styleDirective = valueFn({ restrict: 'E', terminal: false }); /** * @ngdoc directive * @name ngRequired * * @description * * ngRequired adds the required {@link ngModel.NgModelController#$validators `validator`} to {@link ngModel `ngModel`}. * It is most often used for {@link input `input`} and {@link select `select`} controls, but can also be * applied to custom controls. * * The directive sets the `required` attribute on the element if the Angular expression inside * `ngRequired` evaluates to true. A special directive for setting `required` is necessary because we * cannot use interpolation inside `required`. See the {@link guide/interpolation interpolation guide} * for more info. * * The validator will set the `required` error key to true if the `required` attribute is set and * calling {@link ngModel.NgModelController#$isEmpty `NgModelController.$isEmpty`} with the * {@link ngModel.NgModelController#$viewValue `ngModel.$viewValue`} returns `true`. For example, the * `$isEmpty()` implementation for `input[text]` checks the length of the `$viewValue`. When developing * custom controls, `$isEmpty()` can be overwritten to account for a $viewValue that is not string-based. * * @example * * * * * * Toggle required: * * * This input must be filled if `required` is true: * * * required error set? = {{form.input.$error.required}} * model = {{model}} * * * * var required = element(by.binding('form.input.$error.required')); var model = element(by.binding('model')); var input = element(by.id('input')); it('should set the required error', function() { expect(required.getText()).toContain('true'); input.sendKeys('123'); expect(required.getText()).not.toContain('true'); expect(model.getText()).toContain('123'); }); * * */ var requiredDirective = function() { return { restrict: 'A', require: '?ngModel', link: function(scope, elm, attr, ctrl) { if (!ctrl) return; attr.required = true; // force truthy in case we are on non input element ctrl.$validators.required = function(modelValue, viewValue) { return !attr.required || !ctrl.$isEmpty(viewValue); }; attr.$observe('required', function() { ctrl.$validate(); }); } }; }; /** * @ngdoc directive * @name ngPattern * * @description * * ngPattern adds the pattern {@link ngModel.NgModelController#$validators `validator`} to {@link ngModel `ngModel`}. * It is most often used for text-based {@link input `input`} controls, but can also be applied to custom text-based controls. * * The validator sets the `pattern` error key if the {@link ngModel.NgModelController#$viewValue `ngModel.$viewValue`} * does not match a RegExp which is obtained by evaluating the Angular expression given in the * `ngPattern` attribute value: * * If the expression evaluates to a RegExp object, then this is used directly. * * If the expression evaluates to a string, then it will be converted to a RegExp after wrapping it * in `^` and `$` characters. For instance, `"abc"` will be converted to `new RegExp('^abc$')`. * * * **Note:** Avoid using the `g` flag on the RegExp, as it will cause each successive search to * start at the index of the last search's match, thus not taking the whole input value into * account. * * * * **Note:** This directive is also added when the plain `pattern` attribute is used, with two * differences: * * * `ngPattern` does not set the `pattern` attribute and therefore HTML5 constraint validation is * not available. * * * The `ngPattern` attribute must be an expression, while the `pattern` value must be * interpolated. * * * * * @example * * * * * * Set a pattern (regex string): * * * This input is restricted by the current pattern: * * * input valid? = {{form.input.$valid}} * model = {{model}} * * * * var model = element(by.binding('model')); var input = element(by.id('input')); it('should validate the input with the default pattern', function() { input.sendKeys('aaa'); expect(model.getText()).not.toContain('aaa'); input.clear().then(function() { input.sendKeys('123'); expect(model.getText()).toContain('123'); }); }); * * */ var patternDirective = function() { return { restrict: 'A', require: '?ngModel', link: function(scope, elm, attr, ctrl) { if (!ctrl) return; var regexp, patternExp = attr.ngPattern || attr.pattern; attr.$observe('pattern', function(regex) { if (isString(regex) && regex.length > 0) { regex = new RegExp('^' + regex + '$'); } if (regex && !regex.test) { throw minErr('ngPattern')('noregexp', 'Expected {0} to be a RegExp but was {1}. Element: {2}', patternExp, regex, startingTag(elm)); } regexp = regex || undefined; ctrl.$validate(); }); ctrl.$validators.pattern = function(modelValue, viewValue) { // HTML5 pattern constraint validates the input value, so we validate the viewValue return ctrl.$isEmpty(viewValue) || isUndefined(regexp) || regexp.test(viewValue); }; } }; }; /** * @ngdoc directive * @name ngMaxlength * * @description * * ngMaxlength adds the maxlength {@link ngModel.NgModelController#$validators `validator`} to {@link ngModel `ngModel`}. * It is most often used for text-based {@link input `input`} controls, but can also be applied to custom text-based controls. * * The validator sets the `maxlength` error key if the {@link ngModel.NgModelController#$viewValue `ngModel.$viewValue`} * is longer than the integer obtained by evaluating the Angular expression given in the * `ngMaxlength` attribute value. * * * **Note:** This directive is also added when the plain `maxlength` attribute is used, with two * differences: * * * `ngMaxlength` does not set the `maxlength` attribute and therefore HTML5 constraint * validation is not available. * * * The `ngMaxlength` attribute must be an expression, while the `maxlength` value must be * interpolated. * * * * * @example * * * * * * Set a maxlength: * * * This input is restricted by the current maxlength: * * * input valid? = {{form.input.$valid}} * model = {{model}} * * * * var model = element(by.binding('model')); var input = element(by.id('input')); it('should validate the input with the default maxlength', function() { input.sendKeys('abcdef'); expect(model.getText()).not.toContain('abcdef'); input.clear().then(function() { input.sendKeys('abcde'); expect(model.getText()).toContain('abcde'); }); }); * * */ var maxlengthDirective = function() { return { restrict: 'A', require: '?ngModel', link: function(scope, elm, attr, ctrl) { if (!ctrl) return; var maxlength = -1; attr.$observe('maxlength', function(value) { var intVal = toInt(value); maxlength = isNaN(intVal) ? -1 : intVal; ctrl.$validate(); }); ctrl.$validators.maxlength = function(modelValue, viewValue) { return (maxlength < 0) || ctrl.$isEmpty(viewValue) || (viewValue.length <= maxlength); }; } }; }; /** * @ngdoc directive * @name ngMinlength * * @description * * ngMinlength adds the minlength {@link ngModel.NgModelController#$validators `validator`} to {@link ngModel `ngModel`}. * It is most often used for text-based {@link input `input`} controls, but can also be applied to custom text-based controls. * * The validator sets the `minlength` error key if the {@link ngModel.NgModelController#$viewValue `ngModel.$viewValue`} * is shorter than the integer obtained by evaluating the Angular expression given in the * `ngMinlength` attribute value. * * * **Note:** This directive is also added when the plain `minlength` attribute is used, with two * differences: * * * `ngMinlength` does not set the `minlength` attribute and therefore HTML5 constraint * validation is not available. * * * The `ngMinlength` value must be an expression, while the `minlength` value must be * interpolated. * * * * * @example * * * * * * Set a minlength: * * * This input is restricted by the current minlength: * * * input valid? = {{form.input.$valid}} * model = {{model}} * * * * var model = element(by.binding('model')); var input = element(by.id('input')); it('should validate the input with the default minlength', function() { input.sendKeys('ab'); expect(model.getText()).not.toContain('ab'); input.sendKeys('abc'); expect(model.getText()).toContain('abc'); }); * * */ var minlengthDirective = function() { return { restrict: 'A', require: '?ngModel', link: function(scope, elm, attr, ctrl) { if (!ctrl) return; var minlength = 0; attr.$observe('minlength', function(value) { minlength = toInt(value) || 0; ctrl.$validate(); }); ctrl.$validators.minlength = function(modelValue, viewValue) { return ctrl.$isEmpty(viewValue) || viewValue.length >= minlength; }; } }; }; if (window.angular.bootstrap) { //AngularJS is already loaded, so we can return here... if (window.console) { console.log('WARNING: Tried to load angular more than once.'); } return; } //try to bind to jquery now so that one can write jqLite(document).ready() //but we will rebind on bootstrap again. bindJQuery(); publishExternalAPI(angular); angular.module("ngLocale", [], ["$provide", function($provide) { var PLURAL_CATEGORY = {ZERO: "zero", ONE: "one", TWO: "two", FEW: "few", MANY: "many", OTHER: "other"}; function getDecimals(n) { n = n + ''; var i = n.indexOf('.'); return (i == -1) ? 0 : n.length - i - 1; } function getVF(n, opt_precision) { var v = opt_precision; if (undefined === v) { v = Math.min(getDecimals(n), 3); } var base = Math.pow(10, v); var f = ((n * base) | 0) % base; return {v: v, f: f}; } $provide.value("$locale", { "DATETIME_FORMATS": { "AMPMS": [ "AM", "PM" ], "DAY": [ "Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday" ], "ERANAMES": [ "Before Christ", "Anno Domini" ], "ERAS": [ "BC", "AD" ], "FIRSTDAYOFWEEK": 6, "MONTH": [ "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" ], "SHORTDAY": [ "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat" ], "SHORTMONTH": [ "Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec" ], "STANDALONEMONTH": [ "January", "February", "March", "April", "May", "June", "July", "August", "September", "October", "November", "December" ], "WEEKENDRANGE": [ 5, 6 ], "fullDate": "EEEE, MMMM d, y", "longDate": "MMMM d, y", "medium": "MMM d, y h:mm:ss a", "mediumDate": "MMM d, y", "mediumTime": "h:mm:ss a", "short": "M/d/yy h:mm a", "shortDate": "M/d/yy", "shortTime": "h:mm a" }, "NUMBER_FORMATS": { "CURRENCY_SYM": "$", "DECIMAL_SEP": ".", "GROUP_SEP": ",", "PATTERNS": [ { "gSize": 3, "lgSize": 3, "maxFrac": 3, "minFrac": 0, "minInt": 1, "negPre": "-", "negSuf": "", "posPre": "", "posSuf": "" }, { "gSize": 3, "lgSize": 3, "maxFrac": 2, "minFrac": 2, "minInt": 1, "negPre": "-\u00a4", "negSuf": "", "posPre": "\u00a4", "posSuf": "" } ] }, "id": "en-us", "localeID": "en_US", "pluralCat": function(n, opt_precision) { var i = n | 0; var vf = getVF(n, opt_precision); if (i == 1 && vf.v == 0) { return PLURAL_CATEGORY.ONE; } return PLURAL_CATEGORY.OTHER;} }); }]); jqLite(window.document).ready(function() { angularInit(window.document, bootstrap); }); })(window); !window.angular.$$csp().noInlineStyle && window.angular.element(document.head).prepend('');https://code.angularjs.org/1.5.5/`
Add Itemhttps://code.angularjs.org/1.5.5/angular.js
link1http://www.gravatar.com/avatar/{{hash}}
link 1https://code.angularjs.org/1.5.5/angular.js
link 2https://code.angularjs.org/1.5.5/angular.js
anchorhttps://code.angularjs.org/1.5.5/angular.js
links!https://code.angularjs.org/1.5.5/angular.js

URLs of crawlers that visited me.